Description
The QGKA is a turbine flowmeter for gas with flange connection. It is particularly suited to measuring gas volume flow in pipes DN25 to DN300 where flow, total, temperature and pressure are to be read on the device.
Turbine principle, the gas drives a bladed rotor and the electronics count its revolutions. Flow range 2.5 … 6500 m³/h depending on nominal size, lower limit at a flow velocity of 0.5 m/s. Accuracy class 1.5. Output 4 … 20 mA, pulse and RS485, the RS485 protocol is available on request. The supply voltage is available on request. LCD display with keys on the head. Process connection flange, DN25 … DN300.
Body of aluminium alloy or stainless steel, nominal pressure 1.6 MPa. Medium temperature -20 … +80 °C, ambient temperature -20 … +50 °C. The protection grade is available on request. Explosion protection per datasheet Ex ib IIB T4; certificate, notified body and ATEX or IECEx number are not documented. A declaration of conformity is available on request. We will confirm higher pressure ratings up to 42 MPa on request. DN32, DN40, DN65 and DN125 exist in stainless steel only, DN200, DN250 and DN300 in aluminium only. Wiring diagram and pin assignment are also available on request.
Benefits at a glance
- Turbine principle for gas, 2.5 … 6500 m³/h
- Nominal sizes DN25 … DN300 with flange connection
- Accuracy class 1.5 with non-linear correction
- Temperature and pressure compensation in the head as an option
- LCD display for flow, total, temperature and pressure
- Outputs 4 … 20 mA, pulse and RS485
- Instrument factor set on site by key
- Body of aluminium alloy or stainless steel