Description
The EKMH is the tool that belongs to the programmable transmitters of this range. It hangs on a USB port of the PC, is powered from it, and writes the setting into the transmitter without contact over RFID to ISO 15693 — the same NFC technology a phone uses for a travel card. Suitable devices are the EKMA, EKMB, TP-DR and SP-DR. The software that comes with it reads, writes and edits the configuration: type of sensor, type of connection, measuring range and the behaviour of the output in case of a fault. The driver installs itself when the unit is plugged in, the interface is a HID USB port, and the delivery contains the programming unit, the USB cable of about 1.8 m and the software. The case is black plastic of about 190 × 102 × 29 mm and weighs around 160 g without the cable.
Communication and software
- RFID to ISO 15693, NFC
- For EKMA · EKMB · TP-DR · SP-DR
- PC interface HID USB port
- USB 2.0 compatible
- Connection PC: USB type A
- Connection unit: mini USB, 5-pole
- Cable length approx. 1.8 m
- Read, write and edit mode
Device and environment
- Case plastics, black, approx. 190 × 102 × 29 mm
- Weight approx. 160 g without cable
- Protection class IP20
- Supply 5 V from the USB port
- Operating temperature 0 … +50 °C
- Storage −40 … +85 °C
- Humidity 30 … 90 %, no condensation
- Driver installs itself on plugging in
All technical data, dimensions and available versions are listed in the datasheet for download.