Description
The QEKD is a thermal flow and temperature sensor with colour display and IO-Link. It is particularly suited to monitoring flow and temperature together in water lines, with one sensor covering a range of pipe diameters.
Sealed probe with a heated detection resistor and an unheated reference resistor. Flow velocity 0.01 … 2.0 m/s (water), dead zone ≤ 0.01 m/s, temperature 0 … 100 °C with ± 1.5 °C. Flow accuracy and repeatability are available on request. Switching output PNP or NPN (max. 200 mA) with IO-Link, analogue output 4 … 20 mA or 1 … 5 V for flow and temperature, frequency output 100 Hz at full scale. Supply 24 V DC ± 20 %, connection M12 × 1, 5-pin.
Wetted parts stainless steel 316L and EPDM, housing stainless steel, head stainless steel or engineering plastic. Process connection M18 × 1.5 internal thread, probe rod or chuck Ø 25.4 mm or Ø 50.5 mm. Pressure range 100 bar, medium temperature 0 … 100 °C, ambient -20 … +80 °C, protection grade IP67. A declaration of conformity is available on request. Before sizing, note: Flow ranges for oil and gas are available on request. The technical data give 24 V DC ± 20 %, the wiring diagram 12 … 30 V DC.
Benefits at a glance
- Flow and temperature in one device
- Thermal principle without moving parts
- 0.96" colour display for flow and temperature
- IO-Link on the switching output
- Two signal lamps, one for each switching output
- Setting by the three keys −, M and +
- Wetted parts stainless steel 316L and EPDM
- Pressure range 100 bar, protection grade IP67