Description
The LLAH is a tension and compression load cell of monolithic stainless steel for high-accuracy force measurement. It is particularly suited to applications to UNI EN ISO 376 in tension and compression.
The load cell is available in measuring ranges from 10 kN to 2 MN or from 1 t to 200 t, in accuracy classes 00, 0.5 and 1 to ISO 376 (2 MN without class 00). It achieves a maximum combined error of ±0.028 %, with non-linearity and hysteresis of ±0.02 % each (2 MN: ±0.071 % and ±0.05 %). The full Wheatstone bridge in 6-wire configuration with a rated output of 2 mV/V allows reliable integration into existing measuring systems. It is connected by a 5 m shielded cable, optionally with an MIL7M connector.
The stainless steel housing and IP67 protection allow use even under demanding environmental conditions. The load cell is delivered factory-calibrated and is CE, RoHS and EAC compliant. ISO 17025 calibration is available as an option.
Benefits at a glance
- Tension and compression load cell of monolithic stainless steel
- Measuring ranges from 10 kN to 2 MN (1 t to 200 t)
- Accuracy class 00, 0.5 and 1 to ISO 376
- Combined error ≤ ±0.028 %
- Non-linearity and hysteresis ±0.02 % each
- Full Wheatstone bridge in 6-wire configuration, 2 mV/V
- 5 m shielded cable, optionally MIL7M connector
- IP67 protection
- Factory-calibrated
- Optionally available with ISO 17025 calibration