{"title":"Weighing Indicators in Enclosures","description":"\u003cp\u003e\u003cstrong\u003eWeighing indicators in enclosures\u003c\/strong\u003e come with their own protection and do not require a control cabinet. Plastic enclosures with cable glands and protection class up to IP67, mountable on wall, column or table. The solution for wet areas, dusty environments and for retrofitting existing scales.\u003c\/p\u003e\n\u003ch2\u003eWhen weighing indicators in enclosures are the right choice\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003eAn enclosed device is useful wherever there is no control cabinet nearby or the environment overstrains a panel-mounted device. Typical examples: floor scales in the hall, weighing stations in shipping, filling stations in food production, stable areas in agriculture, retrofitted scales in a workshop.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe advantage over \u003ca href=\"\/en\/collections\/waegeindikatoren-fuer-den-einbau\"\u003epanel mounting\u003c\/a\u003e is its self-sufficiency. You don't need a control panel or a cutout, just a wall or a column and the cable routes. Basic information on display, certification and dosing functions can be found in the overview of \u003ca href=\"\/en\/collections\/waegeindikatoren\"\u003eweighing indicators\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eThe protection class is only achieved during installation\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eIP68 or IP69k is a characteristic of the housing in the closed, correctly mounted state, not of the device in the box. In practice, most water ingress occurs at four points.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe \u003cstrong\u003ecable glands\u003c\/strong\u003e must match the cable diameter. A cable that is too thin in a gland that is too large will not seal, even if the nut is tight. Unused openings should be closed with blanking plugs, not with adhesive tape.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCable routing\u003c\/strong\u003e should be done from below or from the side with a loop below the housing. A tightly inserted cable from above will lead water directly into the gland.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe \u003cstrong\u003elid seal\u003c\/strong\u003e must be clean and undamaged, and all screws evenly tightened. After each opening for parameterization, a quick check of the seal is worthwhile.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCondensation\u003c\/strong\u003e occurs despite a sealed housing if the device undergoes temperature changes, for example in a refrigerated area or outdoors with night cooling. Moist air trapped when opened condenses inside. Therefore, do not mount in drafts or directly next to doors, and close the housing in a dry, warm environment if possible.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eCount cable entries beforehand\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eSix cable glands may sound generous, but they are quickly occupied. Calculate what actually needs to go in: load cell cables, power supply, relay lines to valves or vibrators, bus line to the control system, possibly printer or external buttons. With multiple cells without a summing box, the demand multiplies.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003ePlan the load cell input separately from power and relay lines, ideally on the opposite side of the housing. Frequency converters and switching loads in the same cable bundle are a common cause of unstable displays.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eCleaning and material\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003ePlastic housings made of polycarbonate and ABS are mechanically robust and designed for everyday industrial use, but react to certain cleaning agents. Solvent-based and highly alcoholic cleaners can cause stress cracks, which are initially only visible as fine haziness and later compromise tightness. Use mild, plastic-approved agents and avoid high-pressure jets directly on seals and glands.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eWhen installing outdoors, also check UV exposure and protect the device from direct sunlight, as the housing heats up and the display becomes less readable.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eMounting and operating height\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eWhen drilling, pay attention to the specified hole distances and mount the device at operating height, approximately 1.4 to 1.6 m, with the display tilted slightly towards the operator or in the line of sight. A membrane keypad can also be operated with gloves, which is the decisive factor in refrigerated and wet areas.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eIf the operator is further away or on a forklift, add a \u003ca href=\"\/en\/collections\/grossanzeigen\"\u003elarge display\u003c\/a\u003e instead of looking for a larger indicator.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eMatching components\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eSensors can be found under \u003ca href=\"\/en\/collections\/waegezellen-kraftaufnehmer\"\u003eload cells and force transducers\u003c\/a\u003e, suitable sub-constructions under \u003ca href=\"\/en\/collections\/waegeplattformen\"\u003eweighing platforms\u003c\/a\u003e, and complete systems under \u003ca href=\"\/en\/collections\/fertige-waagen\"\u003ecomplete scales\u003c\/a\u003e. If it's just about transferring to a control system without on-site operation, a \u003ca href=\"\/en\/collections\/waegetransmitter\"\u003eweighing transmitter\u003c\/a\u003e is more economical.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003ePrice, data sheet and CAD model are available online for each item. Our engineers will advise you directly on the selection of housing, protection class and cable planning.\u003c\/p\u003e","products":[{"product_id":"eilc-waegeindikator-im-gehaeuse-ip67-und-profibus-dp","title":"EILC weighing indicator in enclosure, IP67 and PROFIBUS-DP","description":"\u003ch1\u003eEILC weighing indicator in IP67 housing\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eThe EILC weighing indicator from octogon offers professional weighing and dosing technology for direct wall mounting in harsh industrial environments where a classic control panel is not available\u003c\/span\u003e\u003cspan\u003e. The device is housed in a robust IP67-rated polycarbonate enclosure and is connected via four cable glands\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\u003ch3\u003eKey features at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eRobust design:\u003c\/b\u003e Equipped with a dustproof and waterproof IP67 polycarbonate housing for wall mounting (dimensions: 170 x 140 x 95 mm)\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eEasy-to-read display:\u003c\/b\u003e Features a 6-digit red LED display with 14 mm digit height as well as 8 status LEDs and 5-key operation\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eAutonomous dosing:\u003c\/b\u003e Supports up to 99 batching formulas and independently executes dosing sequences including automatic flight compensation, tolerance control, and fine\/coarse dosing functions\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eLoad cell connection:\u003c\/b\u003e Can connect up to eight 350-ohm load cells in parallel via a high-precision 24-bit A\/D converter\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eAvailable program variants\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eBASE:\u003c\/b\u003e For standard weighing with setpoints and hysteresis\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eLOAD:\u003c\/b\u003e Specially for filling containers and structures\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eUNLOAD:\u003c\/b\u003e Optimized for emptying systems and big bags\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eMULTI PRODUCT (3 \/ 6 \/ 14):\u003c\/b\u003e For complex multi-product dosing including external relay modules\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePower supply:\u003c\/b\u003e 12 to 24 VDC\u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eSerial interfaces:\u003c\/b\u003e RS485 and RS232 (supports Modbus RTU, ASCII, and continuous one-way transmission)\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eInputs and outputs:\u003c\/b\u003e 5 relay outputs (max. 115 VAC \/ 150 mA) and 3 opto-isolated PNP digital inputs\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eOptions \u0026amp; interfaces:\u003c\/b\u003e 16-bit analog output as well as various fieldbus and Ethernet modules (e.g., CANopen, PROFIBUS-DP, Modbus\/TCP with integrated web app) upon request\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eOperating temperatures:\u003c\/b\u003e -20 °C to +60 °C (in the legal-for-trade range -10 °C to +40 °C)\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eCertifications:\u003c\/b\u003e Comprehensive approvals such as CE, UKCA, OIML, NTEP, EAC, and NMI\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon Shop","offers":[{"title":"Default Title","offer_id":56812564644166,"sku":null,"price":600.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/Waegeindikator-L-W200BOX.png?v=1787302497"},{"product_id":"eild-waegeindikator-im-polycarbonat-gehaeuse-ip64","title":"EILD weighing indicator in polycarbonate enclosure, IP64","description":"\u003cp\u003eThe \u003cstrong\u003eEILD\u003c\/strong\u003e is a weighing indicator with external controls in a polycarbonate housing, type \u003cstrong\u003eW200BOXEC\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt is designed for dosing tasks directly at the machine: the selector switch as well as the start and stop buttons are located in the housing lid, allowing recipe changes and cycle start to be carried out at the scale.\u003c\/p\u003e\n\u003cp\u003eThe weighing input accepts up to \u003cstrong\u003e8 load cells with 350 Ω\u003c\/strong\u003e in 4- or 6-wire technology. The A\/D converter operates with \u003cstrong\u003e24 bit\u003c\/strong\u003e and \u003cstrong\u003e16,000,000 points\u003c\/strong\u003e at \u003cstrong\u003e4.8 kHz\u003c\/strong\u003e and delivers \u003cstrong\u003e300 conversions per second\u003c\/strong\u003e; the usable sensitivity is \u003cstrong\u003e±7 mV\/V\u003c\/strong\u003e with a measuring range of \u003cstrong\u003e±39 mV\u003c\/strong\u003e. Linearity is \u003cstrong\u003e\u0026lt; 0.01% FS\u003c\/strong\u003e, and temperature drift is \u003cstrong\u003e\u0026lt; 0.0005% FS\/°C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe 6-digit red LED display has a \u003cstrong\u003e14 mm\u003c\/strong\u003e digit height, plus 8 status LEDs and a 5-button keyboard. The device offers \u003cstrong\u003e5 relay outputs\u003c\/strong\u003e, \u003cstrong\u003e3 opto-isolated PNP inputs\u003c\/strong\u003e, and serial interfaces \u003cstrong\u003eRS485 and RS232\u003c\/strong\u003e with \u003cstrong\u003eModbus RTU\u003c\/strong\u003e, ASCII or continuous transmission; analog output, fieldbus and Ethernet modules are available on request. The housing measures \u003cstrong\u003e170 x 140 x 95 mm\u003c\/strong\u003e, is protected according to \u003cstrong\u003eIP64\u003c\/strong\u003e and is wall-mounted. Power supply is \u003cstrong\u003e12 to 24 V DC\u003c\/strong\u003e at \u003cstrong\u003e5 W\u003c\/strong\u003e, the operating temperature range is from \u003cstrong\u003e-20 °C to +60 °C\u003c\/strong\u003e. Approved versions are certified according to \u003cstrong\u003eOIML R76:2006\u003c\/strong\u003e, Class III, with 3 x 10,000 divisions.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eWeighing indicator in polycarbonate housing, protection class IP64, for wall mounting\u003c\/li\u003e\n\n\u003cli\u003eSelector switch as well as start and stop button in the lid\u003c\/li\u003e\n\n\u003cli\u003eUp to 8 load cells with 350 Ω\u003c\/li\u003e\n\n\u003cli\u003eA\/D converter 24 bit, 16,000,000 points, 300 conversions per second\u003c\/li\u003e\n\n\u003cli\u003e6-digit red LED display, 14 mm digit height\u003c\/li\u003e\n\n\u003cli\u003e99 dosing recipes with automatic fall calculation and tolerance control\u003c\/li\u003e\n\n\u003cli\u003e5 relay outputs and 3 opto-isolated PNP inputs\u003c\/li\u003e\n\n\u003cli\u003eRS485 and RS232 with Modbus RTU\u003c\/li\u003e\n\n\u003cli\u003eOIML R76:2006, Class III, 3 x 10,000 divisions\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":56812564676934,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EILD_W200BOXEC_titelbild.png?v=1788183073"},{"product_id":"eile-waegeindikator-mit-lcd-anzeige-6-stellig-ip67","title":"EILE weighing indicator with LCD display, 6 digits, IP67","description":"\u003cp\u003eThe \u003cstrong\u003eEILE\u003c\/strong\u003e is a weighing indicator with a backlit LCD display in an ABS housing, type \u003cstrong\u003eWDESK-L\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt is designed for weighing and dosing tasks directly at the scale and can be used as a desktop, wall, column, or panel-mounted device.\u003c\/p\u003e\n\u003cp\u003eThe 6-digit semi-alphanumeric display has a digit height of \u003cstrong\u003e20 mm\u003c\/strong\u003e, is backlit, and shows \u003cstrong\u003e46 status symbols\u003c\/strong\u003e; it is operated via a \u003cstrong\u003e6-button membrane keypad\u003c\/strong\u003e. The weighing input accepts up to \u003cstrong\u003e8 load cells with 350 Ω\u003c\/strong\u003e in 4- or 6-wire technology. The A\/D converter operates with \u003cstrong\u003e24 bit\u003c\/strong\u003e and \u003cstrong\u003e16,000,000 points\u003c\/strong\u003e at \u003cstrong\u003e4.8 kHz\u003c\/strong\u003e and provides \u003cstrong\u003e300 conversions per second\u003c\/strong\u003e; the usable sensitivity is \u003cstrong\u003e±7 mV\/V\u003c\/strong\u003e, the measuring range \u003cstrong\u003e±39 mV\u003c\/strong\u003e, and the linearity \u003cstrong\u003e\u0026lt; 0.01% FS\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eFeatures include \u003cstrong\u003e5 relay outputs\u003c\/strong\u003e, \u003cstrong\u003e3 opto-isolated PNP inputs\u003c\/strong\u003e, as well as \u003cstrong\u003eRS485 and RS232\u003c\/strong\u003e with \u003cstrong\u003eModbus RTU\u003c\/strong\u003e, ASCII or continuous transmission. A \u003cstrong\u003eWiFi module with 2.4 GHz\u003c\/strong\u003e and integrated web server, an analog output, and fieldbus and Ethernet modules are available on request. The standard housing measures \u003cstrong\u003e226 x 122 x 164 mm\u003c\/strong\u003e with a panel cutout of \u003cstrong\u003e186 x 96 mm\u003c\/strong\u003e and is protected according to \u003cstrong\u003eIP67\u003c\/strong\u003e; a version is approved for \u003cstrong\u003eATEX Zone 2-22\u003c\/strong\u003e. Power is supplied with \u003cstrong\u003e12 to 24 V DC\u003c\/strong\u003e at \u003cstrong\u003e6 W\u003c\/strong\u003e, the operating temperature range extends from \u003cstrong\u003e-20 °C to +60 °C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eWeighing indicator in ABS housing, protection class IP67 in the standard version\u003c\/li\u003e\n\n\u003cli\u003e6-digit backlit LCD display, 20 mm digit height\u003c\/li\u003e\n\n\u003cli\u003e46 status symbols and 6-button membrane keypad\u003c\/li\u003e\n\n\u003cli\u003eMounting on the table, wall, column, or in the front panel\u003c\/li\u003e\n\n\u003cli\u003eUp to 8 load cells with 350 Ω\u003c\/li\u003e\n\n\u003cli\u003eA\/D converter 24 bit, 16,000,000 points, 300 conversions per second\u003c\/li\u003e\n\n\u003cli\u003e99 dosing recipes with automatic fall calculation and tolerance control\u003c\/li\u003e\n\n\u003cli\u003eRS485 and RS232 with Modbus RTU, WiFi module on request\u003c\/li\u003e\n\n\u003cli\u003eVersion available for ATEX Zone 2-22\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":56812564709702,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EILE_WDESK-L_titelbild.png?v=1788183073"},{"product_id":"eilf-waegeindikator-mit-led-anzeige-6-stellig-ip67","title":"EILF weighing indicator with LED display, 6 digits, IP67","description":"\u003cp\u003eThe \u003cstrong\u003eEILF\u003c\/strong\u003e is an ABS weighing indicator, type \u003cstrong\u003eWDESK-R\u003c\/strong\u003e; the R version differs from the L version by its \u003cstrong\u003e6-digit semi-alphanumeric red LED display\u003c\/strong\u003e with \u003cstrong\u003e16 indicator LEDs\u003c\/strong\u003e instead of the backlit LCD display with 46 message icons.\u003c\/p\u003e\n\u003cp\u003eIt is designed for weighing and dosing tasks directly at the scale and can be installed on the wall, on a table, on a column, or in a panel front.\u003c\/p\u003e\n\u003cp\u003eThe digit height is \u003cstrong\u003e20 mm\u003c\/strong\u003e, operated via a \u003cstrong\u003e6-button keyboard\u003c\/strong\u003e; a clock\/calendar with buffer battery is built-in. The weighing input accepts up to \u003cstrong\u003e8 load cells with 350 Ω\u003c\/strong\u003e in 4- or 6-wire technology. The A\/D converter operates with \u003cstrong\u003e24 bits\u003c\/strong\u003e and \u003cstrong\u003e16,000,000 digits\u003c\/strong\u003e at \u003cstrong\u003e4.8 kHz\u003c\/strong\u003e and provides \u003cstrong\u003e300 conversions per second\u003c\/strong\u003e; the measuring range is \u003cstrong\u003e±39 mV\u003c\/strong\u003e, the usable sensitivity \u003cstrong\u003e±7 mV\/V\u003c\/strong\u003e, the linearity \u003cstrong\u003e\u0026lt; 0.01% full scale\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThere are \u003cstrong\u003e5 relay outputs\u003c\/strong\u003e, \u003cstrong\u003e3 opto-isolated digital PNP inputs\u003c\/strong\u003e as well as \u003cstrong\u003eRS485 and RS232\u003c\/strong\u003e with \u003cstrong\u003eModBus RTU\u003c\/strong\u003e, ASCII or continuous transmission. A \u003cstrong\u003e2.4 GHz WiFi module\u003c\/strong\u003e, an opto-isolated 16-bit analog output, as well as fieldbus and Ethernet modules are available on request. The standard version measures \u003cstrong\u003e226 x 122 x 164 mm\u003c\/strong\u003e with a panel cutout of \u003cstrong\u003e186 x 96 mm\u003c\/strong\u003e and is protected to \u003cstrong\u003eIP67\u003c\/strong\u003e; a version for \u003cstrong\u003eATEX II 3GD (Zone 2-22)\u003c\/strong\u003e is available. Power is supplied with \u003cstrong\u003e12 to 24 V DC\u003c\/strong\u003e at \u003cstrong\u003e6 W\u003c\/strong\u003e, the operating temperature ranges from \u003cstrong\u003e-20 °C to +60 °C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eABS weighing indicator, IP67 protection in the standard version\u003c\/li\u003e\n\n\u003cli\u003e6-digit red LED display, 20 mm digit height, 16 indicator LEDs\u003c\/li\u003e\n\n\u003cli\u003eWall, table, column, or panel front mounting\u003c\/li\u003e\n\n\u003cli\u003eUp to 8 load cells with 350 Ω in 4- or 6-wire technology\u003c\/li\u003e\n\n\u003cli\u003eA\/D converter 24 bit, 16,000,000 digits, 300 conversions per second\u003c\/li\u003e\n\n\u003cli\u003eUp to 99 adjustable formulas with automatic fall calculation\u003c\/li\u003e\n\n\u003cli\u003eRS485 and RS232 with ModBus RTU, WiFi module on request\u003c\/li\u003e\n\n\u003cli\u003eVersion for ATEX II 3GD (Zone 2-22) available\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":56812564742470,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EILF_L-WDESK-R_titelbild.png?v=1788184595"},{"product_id":"eilg-waegeindikator-edelstahl-aisi-304-lcd-anzeige-ip68","title":"EILG weighing indicator, AISI 304 stainless steel, LCD display, IP68","description":"\u003cp\u003eThe \u003cstrong\u003eEILG\u003c\/strong\u003e is an \u003cstrong\u003eAISI 304\u003c\/strong\u003e stainless steel weighing indicator, \u003cstrong\u003eWINOX-L\u003c\/strong\u003e type; the L version differs from the R version in its \u003cstrong\u003e6-digit semi-alphanumeric backlit LCD display\u003c\/strong\u003e with \u003cstrong\u003e46 message icons\u003c\/strong\u003e instead of the red LED display with 16 indicator LEDs.\u003c\/p\u003e\n\u003cp\u003eIt is designed for weighing and dosing tasks in environments where the housing is regularly cleaned; it can be installed on a wall, table, column or control panel front, and a bracket is included.\u003c\/p\u003e\n\u003cp\u003eThe digit height is \u003cstrong\u003e20 mm\u003c\/strong\u003e, operated via a \u003cstrong\u003e6-button keyboard\u003c\/strong\u003e; the housing is protected to \u003cstrong\u003eIP68\u003c\/strong\u003e, with \u003cstrong\u003eIP69K\u003c\/strong\u003e rating upon request according to \u003cstrong\u003eDIN 40050-9\u003c\/strong\u003e for high-pressure and steam jet cleaning (\u003cstrong\u003e100 bar\u003c\/strong\u003e, \u003cstrong\u003e80 °C\u003c\/strong\u003e, \u003cstrong\u003e250 seconds\u003c\/strong\u003e). Dimensions are \u003cstrong\u003e286 x 206 x 108 mm\u003c\/strong\u003e, with bracket \u003cstrong\u003e290 x 206 x 187 mm\u003c\/strong\u003e, panel cutout \u003cstrong\u003e248 x 160 mm\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe weighing input accepts up to \u003cstrong\u003e8 load cells with 350 Ω\u003c\/strong\u003e. The A\/D converter operates with \u003cstrong\u003e24 bits\u003c\/strong\u003e and \u003cstrong\u003e16,000,000 digits\u003c\/strong\u003e at \u003cstrong\u003e4.8 kHz\u003c\/strong\u003e, delivering \u003cstrong\u003e300 conversions per second\u003c\/strong\u003e; the measuring range is \u003cstrong\u003e±39 mV\u003c\/strong\u003e, usable sensitivity \u003cstrong\u003e±7 mV\/V\u003c\/strong\u003e, linearity \u003cstrong\u003e\u0026lt; 0.01% full scale\u003c\/strong\u003e. There are \u003cstrong\u003e5 relay outputs\u003c\/strong\u003e, \u003cstrong\u003e3 opto-isolated digital PNP inputs\u003c\/strong\u003e as well as \u003cstrong\u003eRS485 and RS232\u003c\/strong\u003e with \u003cstrong\u003eModBus RTU\u003c\/strong\u003e, ASCII or continuous transmission; a \u003cstrong\u003e2.4 GHz WiFi module\u003c\/strong\u003e, an analog output, and fieldbus and Ethernet modules are available upon request. Power supply is \u003cstrong\u003e12 to 24 V DC\u003c\/strong\u003e at \u003cstrong\u003e6 W\u003c\/strong\u003e, operating temperature range is \u003cstrong\u003e-20 °C to +60 °C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eAISI 304 stainless steel weighing indicator, IP68 protection, IP69K on request\u003c\/li\u003e\n\n\u003cli\u003e6-digit LCD display, 20 mm digit height, 46 message icons\u003c\/li\u003e\n\n\u003cli\u003eInstallation on wall, table, column or control panel front\u003c\/li\u003e\n\n\u003cli\u003eUp to 8 load cells with 350 Ω\u003c\/li\u003e\n\n\u003cli\u003eA\/D converter 24 bit, 16,000,000 digits, 300 conversions\/s\u003c\/li\u003e\n\n\u003cli\u003eUp to 99 adjustable formulas with automatic drop calculation\u003c\/li\u003e\n\n\u003cli\u003eRS485 and RS232 with ModBus RTU, WiFi module on request\u003c\/li\u003e\n\n\u003cli\u003eVersions for ATEX II 3GD and IECEx (Zone 2-22)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":56812564775238,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EILG_L-WINOX-L_titelbild.png?v=1788184595"},{"product_id":"eilh-waegeindikator-edelstahl-aisi-304-led-anzeige-ip68","title":"EILH weighing indicator, AISI 304 stainless steel, LED display, IP68","description":"\u003cp\u003eThe \u003cstrong\u003eEILH\u003c\/strong\u003e is a weighing indicator in a stainless steel housing made of \u003cstrong\u003eAISI 304\u003c\/strong\u003e, type \u003cstrong\u003eWINOX-R\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt is designed for weighing and dosing tasks in environments where the housing is cleaned regularly and can be mounted on the wall, on a table, on a column, or in the front panel.\u003c\/p\u003e\n\u003cp\u003eThe housing is protected all around to \u003cstrong\u003eIP68\u003c\/strong\u003e, with \u003cstrong\u003eIP69K\u003c\/strong\u003e certification according to DIN 40050-9 for high-pressure and steam jet cleaning available on request. The 6-digit red LED display has a digit height of \u003cstrong\u003e20 mm\u003c\/strong\u003e, plus \u003cstrong\u003e16 status LEDs\u003c\/strong\u003e and a \u003cstrong\u003e6-button membrane keypad\u003c\/strong\u003e. The dimensions are \u003cstrong\u003e286 x 206 x 108 mm\u003c\/strong\u003e, with bracket \u003cstrong\u003e290 x 206 x 187 mm\u003c\/strong\u003e, and the panel cutout is \u003cstrong\u003e248 x 160 mm\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe weighing input accommodates up to \u003cstrong\u003e8 load cells with 350 Ω\u003c\/strong\u003e in 4- or 6-wire technology. The A\/D converter operates with \u003cstrong\u003e24 bits\u003c\/strong\u003e and \u003cstrong\u003e16,000,000 points\u003c\/strong\u003e at \u003cstrong\u003e4.8 kHz\u003c\/strong\u003e and delivers \u003cstrong\u003e300 conversions per second\u003c\/strong\u003e; the usable sensitivity is \u003cstrong\u003e±7 mV\/V\u003c\/strong\u003e, the measuring range is \u003cstrong\u003e±39 mV\u003c\/strong\u003e, and the linearity is \u003cstrong\u003e\u0026lt; 0.01 % FS\u003c\/strong\u003e. There are \u003cstrong\u003e5 relay outputs\u003c\/strong\u003e, \u003cstrong\u003e3 opto-isolated PNP inputs\u003c\/strong\u003e, as well as \u003cstrong\u003eRS485 and RS232\u003c\/strong\u003e with \u003cstrong\u003eModbus RTU\u003c\/strong\u003e, ASCII or continuous transmission; WiFi module, analog output, fieldbus and Ethernet modules are available on request. Power supply is \u003cstrong\u003e12 to 24 V DC\u003c\/strong\u003e at \u003cstrong\u003e6 W\u003c\/strong\u003e, the operating temperature range is from \u003cstrong\u003e-20 °C to +60 °C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eWeighing indicator in stainless steel housing made of AISI 304\u003c\/li\u003e\n\n\u003cli\u003eProtection class IP68, IP69K according to DIN 40050-9 on request\u003c\/li\u003e\n\n\u003cli\u003e6-digit red LED display, 20 mm digit height, 16 status LEDs\u003c\/li\u003e\n\n\u003cli\u003eWall, table, column or front panel mounting, bracket included\u003c\/li\u003e\n\n\u003cli\u003eUp to 8 load cells with 350 Ω\u003c\/li\u003e\n\n\u003cli\u003eA\/D converter 24 bit, 16,000,000 points, 300 conversions per second\u003c\/li\u003e\n\n\u003cli\u003e99 dosing recipes with automatic drop calculation and tolerance control\u003c\/li\u003e\n\n\u003cli\u003eRS485 and RS232 with Modbus RTU, WiFi module on request\u003c\/li\u003e\n\n\u003cli\u003eVersion for ATEX and IECEx Zone 2-22 available\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":56812564808006,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EILH_WINOX-R_titelbild.png?v=1788183073"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/collections\/EILH_WINOX-R_titelbild.png?v=1788947525","url":"https:\/\/octogon.org\/en\/collections\/weighing-indicators-in-enclosures.oembed","provider":"octogon GmbH","version":"1.0","type":"link"}