{"title":"Panel Mount Weighing Indicators","description":"\u003cp\u003e\u003cstrong\u003ePanel-mount weighing indicators\u003c\/strong\u003e are installed in control panels, operator consoles, or control cabinet doors. The DIN sizes 96 x 48 and 96 x 96 mm fit into standardized cutouts and thus usually also into existing ones when an older display unit is being replaced. Protected on the front, designed for wiring in the cabinet on the back.\u003c\/p\u003e\n\u003ch2\u003eWhen panel-mount weighing indicators are the right choice\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003ePanel mounting is suitable if an operator console or control cabinet is already available and the scale is part of a system operated there. The indicator integrates with the other displays and controls, all cables remain inside the cabinet, and the front stays tidy.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eTwo scenarios particularly favor this category: the \u003cstrong\u003econstruction of a new control panel\u003c\/strong\u003e, where you can freely plan the cutout, and the \u003cstrong\u003ereplacement of a defective or outdated device\u003c\/strong\u003e in an existing cutout. If no cabinet is available or the environment is wet and dusty, a \u003ca href=\"\/en\/collections\/waegeindikatoren-im-gehaeuse\"\u003edevice in an enclosure\u003c\/a\u003e is the appropriate choice. General information on display, certification, and dosing functions can be found in the overview of \u003ca href=\"\/en\/collections\/waegeindikatoren\"\u003eweighing indicators\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eFormat and cutout dimension\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe enclosures comply with the DIN standard series for panel-mounted devices. The \u003cstrong\u003e96 x 48 mm\u003c\/strong\u003e format is the narrow version for consoles with limited front space, while \u003cstrong\u003e96 x 96 mm\u003c\/strong\u003e offers more room for the keypad and status LEDs, making it more comfortable for operators.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe critical factor for purchase is not the front dimension, but the \u003cstrong\u003ecutout dimension\u003c\/strong\u003e in the panel, which is slightly smaller because the frame overlaps the edge. The exact specification is provided in the data sheet for each item, and the CAD model is available for download. When replacing a device, measure the existing cutout instead of inferring the format from the old built-in device.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eDo not underestimate the installation depth\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eThe housing depth is only part of the space requirement. Behind the device, you also need additional space for the plug-in terminals and the bending radius of the cables. Therefore, calculate with significantly more than the datasheet depth, especially in shallow consoles and in control cabinet doors, where the device can collide with terminal blocks or cable ducts when closing. Check the door clearance before drilling, not afterwards.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eProtection class and sealing\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eFor panel-mount devices, the front plate is specified, with IP54 being common. This only applies to the visible side; the rear with the terminals is unprotected and must be located within the cabinet or console. For wet areas, this means either a sufficiently sealed console or a device in its own enclosure.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eFor the front seal to be effective, the panel around the cutout must be flat and the clamping brackets tightened evenly. Overtightening distorts the frame and lifts the seal in some places, which worsens rather than improves protection.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eHeat and interference in the control cabinet\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eLED displays and power supplies generate heat, and in the cabinet, it rises. Observe the permissible ambient temperature, leave space between multiple devices, and do not mount the indicator directly above frequency converters or transformers. A device that sporadically shows errors in summer often has a thermal, not an electronic, problem.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eRoute the load cell cable shielded and separate from power lines, with the shield grounded at one end. For multiple weighing points in one console, it is worthwhile to plan the arrangement of devices and cable routes together.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eConsider usability\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003ePanel-mount devices have compact membrane keypads with few buttons. This is sufficient for displays, taring, and simple setpoints. If operators regularly switch between recipes or work with gloves, a larger device in an enclosure is more comfortable. If the value needs to be readable from a distance, add a \u003ca href=\"\/en\/collections\/grossanzeigen\"\u003elarge display\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eIf no one needs an on-site display and the value only goes into the control system, a \u003ca href=\"\/en\/collections\/waegetransmitter\"\u003eweighing transmitter\u003c\/a\u003e on the DIN rail is the more compact solution and saves the cutout.\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eMatching Components\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003eYou can find the sensors under \u003ca href=\"\/en\/collections\/waegezellen-kraftaufnehmer\"\u003eload cells and force transducers\u003c\/a\u003e, the rest of the product range in \u003ca href=\"\/en\/collections\/messelektronik\"\u003emeasurement electronics\u003c\/a\u003e, and information on fieldbuses on our \u003ca href=\"\/en\/pages\/profinet\"\u003efieldbus page\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003ePrice, data sheet, and CAD model are available online for each item. Our engineers will advise you directly on the selection of format, installation depth, and wiring.\u003c\/p\u003e","products":[{"product_id":"eilb-waegeindikator-mit-dosierung-99-formeln-ip54","title":"EILB weighing indicator with batching, 99 recipes, IP54","description":"\u003cp\u003e\u003cstrong\u003eWeight indicator L-W200\u003c\/strong\u003e in a box according to DIN standard with dimensions 96 x 96 x 130 mm designed for industrial use. The front panel is certified to \u003cstrong\u003eprotection class IP54\u003c\/strong\u003e and equipped with a \u003cstrong\u003e5-key membrane keyboard\u003c\/strong\u003e and \u003cstrong\u003e8 display LEDs\u003c\/strong\u003e . The weighing indicator also offers a clock and calendar function.\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures of the L-W200 weight indicators\u003cbr\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e✅Installation on the control panel front; wall\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e✅Multiprogram: Dosing single product loading\/unloading and multi-product, max 99 formulas\u003c\/p\u003e\n\u003cp\u003e✅6-digit red \u003cstrong\u003eLED display\u003c\/strong\u003e (14 mm digit height)\u003c\/p\u003e\n\u003cp\u003e✅Interfaces RS485\/RS232 (protocols Modbus RTU\/ASCII)\u003c\/p\u003e\n\u003cp\u003e✅ \u003cstrong\u003e3 digital inputs, 5 relay outputs\u003c\/strong\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e✅ \u003cstrong\u003eOIML R76:2006\u003c\/strong\u003e , Class III, 10000 calibration values ​​0.2μV\/VSI certified\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e✅ \u003cstrong\u003eOIML R61\u003c\/strong\u003e - WELMEC Guide 8.8:2011 ( MID) certified\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e✅A\/D converter 24 bit (16000000 digits) 4.8 kHz\u003c\/p\u003e\n\u003cp\u003e✅ \u003cstrong\u003eFieldbuses\u003c\/strong\u003e on request: Profibus DP, DeviceNet, CANopen, Profinet IO, Modbus\/TCP, Ethernet\/IP. Ethernet TCP\/IP for remote control (web connection to PC, smartphone, tablet, etc.)\u003c\/p\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"octogon Shop\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/L-W200_Datenblatt.pdf?v=1711463052\" style=\"color: #d84f1b;\" target=\"_blank\"\u003e\u003cstrong\u003eDatasheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCAD model:\u003cbr\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/W200.stp?v=1712652174\" style=\"color: #d84f1b;\" title=\"octogon Shop\" target=\"_blank\"\u003eL-W200\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"octogon Shop","offers":[{"title":"Base","offer_id":49329444323654,"sku":"","price":286.0,"currency_code":"EUR","in_stock":true},{"title":"Loading","offer_id":49329444356422,"sku":"","price":386.0,"currency_code":"EUR","in_stock":true},{"title":"Discharge","offer_id":49329444389190,"sku":"","price":386.0,"currency_code":"EUR","in_stock":true},{"title":"3 products","offer_id":49329444421958,"sku":"","price":386.0,"currency_code":"EUR","in_stock":true},{"title":"*6 products","offer_id":49329444454726,"sku":"","price":586.0,"currency_code":"EUR","in_stock":true},{"title":"*14 products","offer_id":49329444487494,"sku":"","price":786.0,"currency_code":"EUR","in_stock":true},{"title":"Multi-program","offer_id":49329444520262,"sku":"","price":386.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/Waegeindikator_L-W200.png?v=1713430622"},{"product_id":"eila-waegeindikator-im-din-kasten-6-stellig-ip54","title":"EILA weighing indicator in DIN case, 6 digits, IP54","description":"\u003cp\u003e\u003cstrong\u003eWeighing indicator L-W100\u003c\/strong\u003e in a \u003cstrong\u003eDIN case\u003c\/strong\u003e, i.e. a case to DIN standard, with dimensions of 96 x 48 x 130 mm for industrial use. The front panel is certified to IP54 and equipped with a 4-key membrane keypad and 8 indicator LEDs. The weighing indicator also offers a clock and calendar function.\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures of the L-W100 weighing indicators\u003cbr\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e✅Panel front mounting\u003c\/p\u003e\n\u003cp\u003e✅6-digit red\u003cstrong\u003e LED display\u003c\/strong\u003e (14 mm digit height)\u003c\/p\u003e\n\u003cp\u003e✅RS485\/RS232 interfaces (Modbus RTU\/ASCII protocols)\u003c\/p\u003e\n\u003cp\u003e✅\u003cstrong\u003e3 digital inputs, 5 relay outputs\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e✅\u003cstrong\u003eOIML R76:2006\u003c\/strong\u003e, class III, 10000 verification divisions 0.2μV\/VSI certified\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e✅\u003cstrong\u003eOIML R61\u003c\/strong\u003e - WELMEC Guide 8.8:2011 (M.I.D.) certified\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e✅A\/D converter 24 bit (16000000 digits) 4.8 kHz\u003c\/p\u003e\n\u003cp\u003e✅16 bit analog output. 0\/4-20 mA; 0-5\/10 V; ±5\/10 V - \u003cstrong\u003eon request\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" title=\"octogon Shop\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/L-W100_Datenblatt.pdf?v=1711463052\" style=\"color: #d84f1b;\" target=\"_blank\"\u003e\u003cstrong\u003eDatasheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCAD model:\u003cbr\u003e\u003ca rel=\"noopener\" title=\"octogon Shop\" style=\"color: #d84f1b;\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/W100.stp?v=1712652159\" target=\"_blank\"\u003eL-W100\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"octogon Shop","offers":[{"title":"Default Title","offer_id":49310759190854,"sku":"","price":280.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/waegeindikator_L-W100.png?v=1713776118"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/collections\/waegeindikator_L-W100.png?v=1788952107","url":"https:\/\/octogon.org\/en\/collections\/panel-mount-weighing-indicators.oembed","provider":"octogon GmbH","version":"1.0","type":"link"}