{"title":"Measurement Electronics","description":"\u003ch2\u003eMeasuring electronics for load cells and force transducers\u003c\/h2\u003e \u003cp\u003eA load cell delivers just a few millivolts. What becomes of that – a displayed value, a fieldbus telegram, a switching point – is decided by the electronics behind it. Here you will find the complete chain from the measuring amplifier to the large display.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003ca href=\"\/en\/collections\/waegetransmitter\"\u003eWeighing transmitters\u003c\/a\u003e with one, four or eight channels for digitisation directly at the cell\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"\/en\/collections\/waegeindikatoren\"\u003eWeighing indicators\u003c\/a\u003e for control cabinets, front panels and desktop housings\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"\/en\/collections\/dms-messverstaerker\"\u003eStrain gauge amplifiers\u003c\/a\u003e for bridge circuits, analogue and digital\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"\/en\/collections\/oem-platinen\"\u003eOEM boards\u003c\/a\u003e for installation in your own device, for load cells and for temperature sensors\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"\/en\/collections\/temperaturmessumformer\"\u003eTemperature transmitters\u003c\/a\u003e for resistance thermometers and thermocouples – in the terminal head, on the DIN rail or as a board\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"\/en\/collections\/grossanzeigen\"\u003eLarge and remote displays\u003c\/a\u003e with digit heights for reading distances of over twenty metres\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"\/en\/collections\/handheld-messgeraete\"\u003eHandheld measuring devices\u003c\/a\u003e for commissioning and service, \u003ca href=\"\/en\/collections\/funk-messtechnik\"\u003ewireless measurement technology\u003c\/a\u003e for measuring points without a cable route\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"\/en\/collections\/zubehoer-messelektronik\"\u003eAccessories\u003c\/a\u003e such as junction boxes and circuit boards\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eConnection to your control system\u003c\/h3\u003e \u003cp\u003eDepending on the device, PROFINET, PROFIBUS-DP, EtherCAT, EtherNet\/IP, CANopen, Modbus, Modbus TCP, Ethernet TCP\/IP, DeviceNet, CC-Link, RS485 and analogue outputs are available. For sensors with a short commissioning time, \u003ca href=\"\/en\/collections\/io-link-messelektronik\"\u003eIO-Link\u003c\/a\u003e is a good choice: parameterisation and measured value run over the same line.\u003c\/p\u003e \u003cp\u003eFinished scales with built-in electronics – bench counting scales and price-computing scales – can be found under \u003ca href=\"\/en\/collections\/fertige-waagen\"\u003efinished scales\u003c\/a\u003e. If no device fits, we develop one. Details can be found on the \u003ca href=\"\/en\/pages\/dienstleistungen-elektronik-entwicklung\"\u003eelectronics development\u003c\/a\u003e page.\u003c\/p\u003e","products":[{"product_id":"eilb-waegeindikator-mit-dosierung-99-formeln-ip54","title":"EILB weighing indicator with batching, 99 recipes, IP54","description":"\u003cp\u003e\u003cstrong\u003eWeight indicator L-W200\u003c\/strong\u003e in a box according to DIN standard with dimensions 96 x 96 x 130 mm designed for industrial use. The front panel is certified to \u003cstrong\u003eprotection class IP54\u003c\/strong\u003e and equipped with a \u003cstrong\u003e5-key membrane keyboard\u003c\/strong\u003e and \u003cstrong\u003e8 display LEDs\u003c\/strong\u003e . The weighing indicator also offers a clock and calendar function.\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures of the L-W200 weight indicators\u003cbr\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e✅Installation on the control panel front; wall\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e✅Multiprogram: Dosing single product loading\/unloading and multi-product, max 99 formulas\u003c\/p\u003e\n\u003cp\u003e✅6-digit red \u003cstrong\u003eLED display\u003c\/strong\u003e (14 mm digit height)\u003c\/p\u003e\n\u003cp\u003e✅Interfaces RS485\/RS232 (protocols Modbus RTU\/ASCII)\u003c\/p\u003e\n\u003cp\u003e✅ \u003cstrong\u003e3 digital inputs, 5 relay outputs\u003c\/strong\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e✅ \u003cstrong\u003eOIML R76:2006\u003c\/strong\u003e , Class III, 10000 calibration values ​​0.2μV\/VSI certified\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e✅ \u003cstrong\u003eOIML R61\u003c\/strong\u003e - WELMEC Guide 8.8:2011 ( MID) certified\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e✅A\/D converter 24 bit (16000000 digits) 4.8 kHz\u003c\/p\u003e\n\u003cp\u003e✅ \u003cstrong\u003eFieldbuses\u003c\/strong\u003e on request: Profibus DP, DeviceNet, CANopen, Profinet IO, Modbus\/TCP, Ethernet\/IP. Ethernet TCP\/IP for remote control (web connection to PC, smartphone, tablet, etc.)\u003c\/p\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"octogon Shop\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/L-W200_Datenblatt.pdf?v=1711463052\" style=\"color: #d84f1b;\" target=\"_blank\"\u003e\u003cstrong\u003eDatasheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCAD model:\u003cbr\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/W200.stp?v=1712652174\" style=\"color: #d84f1b;\" title=\"octogon Shop\" target=\"_blank\"\u003eL-W200\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"octogon Shop","offers":[{"title":"Base","offer_id":49329444323654,"sku":"","price":286.0,"currency_code":"EUR","in_stock":true},{"title":"Loading","offer_id":49329444356422,"sku":"","price":386.0,"currency_code":"EUR","in_stock":true},{"title":"Discharge","offer_id":49329444389190,"sku":"","price":386.0,"currency_code":"EUR","in_stock":true},{"title":"3 products","offer_id":49329444421958,"sku":"","price":386.0,"currency_code":"EUR","in_stock":true},{"title":"*6 products","offer_id":49329444454726,"sku":"","price":586.0,"currency_code":"EUR","in_stock":true},{"title":"*14 products","offer_id":49329444487494,"sku":"","price":786.0,"currency_code":"EUR","in_stock":true},{"title":"Multi-program","offer_id":49329444520262,"sku":"","price":386.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/Waegeindikator_L-W200.png?v=1713430622"},{"product_id":"etlh-waegetransmitter","title":"ETLH weight transmitter","description":"\u003cp\u003e\u003cstrong\u003eWeight transmitter L-TLB4\u003c\/strong\u003e with 6-digit red LED display (8 mm digit height). Compact design with space-saving, slim construction. 4 buttons for system calibration. 6 display LEDs. Dimensions: 26 x 115 x 120 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4 independent readout channels for load cells\u003c\/strong\u003e (monitoring of individual load cells, total weight display, digital equalization).\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures of the L-TLB4 weight transmitter\u003cbr\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e✅16 bit analog output: 0\/4-20 mA; 0-5\/10V; ±5\/10V\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e✅Interface RS485 (Modbus RTU\/ protocol ASCII). \u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e✅2 digital inputs, 3 relay outputs\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e✅OIML R76:2006 certified, class III, 10000 counts 0.2μV\/VSI\u003c\/p\u003e\n\u003cp\u003e✅Installation on the rear wall or panel front on Omega\/DIN rail\u003c\/p\u003e\n\u003cp\u003e✅A\/D converter 24 bit 4 channels (16000000 digits) 4.8 kHz\u003c\/p\u003e\n\u003cp\u003e✅Counter steps 999999\u003c\/p\u003e\n\u003cp\u003e✅Fieldbuses: \u003cstrong\u003eRS485, CANopen, CC-Link, PROFIBUS, PROFINET, Ethernet\/IP, ETHERCAT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e✅The analog output enables the output of:\u003cbr\u003e Current signal: 0...20 mA; 4...20 mA (up to 300 Ohm)\u003cbr\u003e Voltage signal: 0...10 V; 0...5V; ±10V; ±5 V (min 10k Ohm)\u003c\/p\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca title=\"octogon Shop\" style=\"color: #d84f1b;\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/L-TLB4_Datenblatt.pdf?v=1711463052\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCAD model:\u003cbr\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TLB4.stp?v=1712652135\" style=\"color: #d84f1b;\" title=\"octogon Shop\" target=\"_blank\"\u003eL-TLB4\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"octogon Shop","offers":[{"title":"4...20mA; 0...10V; ±10V","offer_id":49294290190662,"sku":"","price":253.0,"currency_code":"EUR","in_stock":true},{"title":"Profinet","offer_id":49294290223430,"sku":"","price":484.0,"currency_code":"EUR","in_stock":true},{"title":"EtherCAT","offer_id":49294290256198,"sku":"","price":484.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/waegetransmitter_L-TLB4.png?v=1735811016"},{"product_id":"eila-waegeindikator-im-din-kasten-6-stellig-ip54","title":"EILA weighing indicator in DIN case, 6 digits, IP54","description":"\u003cp\u003e\u003cstrong\u003eWeighing indicator L-W100\u003c\/strong\u003e in a \u003cstrong\u003eDIN case\u003c\/strong\u003e, i.e. a case to DIN standard, with dimensions of 96 x 48 x 130 mm for industrial use. The front panel is certified to IP54 and equipped with a 4-key membrane keypad and 8 indicator LEDs. The weighing indicator also offers a clock and calendar function.\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures of the L-W100 weighing indicators\u003cbr\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e✅Panel front mounting\u003c\/p\u003e\n\u003cp\u003e✅6-digit red\u003cstrong\u003e LED display\u003c\/strong\u003e (14 mm digit height)\u003c\/p\u003e\n\u003cp\u003e✅RS485\/RS232 interfaces (Modbus RTU\/ASCII protocols)\u003c\/p\u003e\n\u003cp\u003e✅\u003cstrong\u003e3 digital inputs, 5 relay outputs\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e✅\u003cstrong\u003eOIML R76:2006\u003c\/strong\u003e, class III, 10000 verification divisions 0.2μV\/VSI certified\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e✅\u003cstrong\u003eOIML R61\u003c\/strong\u003e - WELMEC Guide 8.8:2011 (M.I.D.) certified\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e✅A\/D converter 24 bit (16000000 digits) 4.8 kHz\u003c\/p\u003e\n\u003cp\u003e✅16 bit analog output. 0\/4-20 mA; 0-5\/10 V; ±5\/10 V - \u003cstrong\u003eon request\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" title=\"octogon Shop\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/L-W100_Datenblatt.pdf?v=1711463052\" style=\"color: #d84f1b;\" target=\"_blank\"\u003e\u003cstrong\u003eDatasheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCAD model:\u003cbr\u003e\u003ca rel=\"noopener\" title=\"octogon Shop\" style=\"color: #d84f1b;\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/W100.stp?v=1712652159\" target=\"_blank\"\u003eL-W100\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"octogon Shop","offers":[{"title":"Default Title","offer_id":49310759190854,"sku":"","price":280.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/waegeindikator_L-W100.png?v=1713776118"},{"product_id":"etlg-waegetransmitter-analog-und-profinet-io","title":"ETLG weight transmitter, analog and ProfiNet-IO","description":"\u003cp\u003e\u003cstrong\u003eWeight transmitters\u003c\/strong\u003e with \u003cstrong\u003eanalog and ProfiNet-IO\u003c\/strong\u003e output serve as the interface between the \u003cstrong\u003eload cell\u003c\/strong\u003e, \u003cstrong\u003eweighing platform\u003c\/strong\u003e or other \u003cstrong\u003estrain gauge sensors\u003c\/strong\u003e and a \u003cstrong\u003ePLC unit \u003c\/strong\u003ein industrial applications. Weight transmitter indicator with 6-digit red LED display (8 mm digit height). Compact design with space-saving narrow construction.  4 buttons for system calibration. 6 indicator LEDs. Dimensions: 25 x 115 x 120 mm.\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures of the weight transmitters\u003cbr\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e✅Weight transmitter for mounting on the rear wall of the control panel on\u003cbr\u003eOmega\/DIN rail\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e✅6-digit semi-alphanumeric red LED display\u003cbr\u003e(8 mm digit height)\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e✅RS485 serial interface for communication via\u003cbr\u003eModBus RTU, ASCII or continuous unidirectional\u003cbr\u003etransmission protocols\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e✅3 relay outputs controlled by setpoints or via protocols\u003c\/p\u003e\n\u003cp\u003e✅2 opto-isolated digital PNP inputs: status readout via serial\u003cbr\u003ecommunication protocols\u003c\/p\u003e\n\u003cp\u003e✅1 load cell input\u003c\/p\u003e\n\u003cp\u003e✅The analog output provides:\u003cbr\u003eCurrent signal: 0...20 mA; 4...20 mA (up to 300 ohm)\u003cbr\u003eVoltage signal: 0...10 V; 0...5 V; ±10 V; ±5 V (min. 10k ohm)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/L-TLB_Datenblatt.pdf?v=1711463053\" style=\"color: #d84f1b;\" title=\"octogon Shop\" rel=\"noopener\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCAD model:\u003cbr\u003e\u003ca rel=\"noopener\" title=\"octogon Shop\" style=\"color: #d84f1b;\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TLB.stp?v=1712652129\" target=\"_blank\"\u003e3D data\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"octogon Shop","offers":[{"title":"4...20mA; 0...10V; ±10V","offer_id":49312646660422,"sku":"","price":220.0,"currency_code":"EUR","in_stock":true},{"title":"Profinet","offer_id":49312646693190,"sku":"","price":418.0,"currency_code":"EUR","in_stock":true},{"title":"EtherCAT","offer_id":49312646725958,"sku":"","price":451.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/ETLG_TLB__product_freigestellt.png?v=1786622909"},{"product_id":"etla-analoger-waegetransmitter","title":"ETLA analog weight transmitter","description":"\u003cp\u003e\u003cstrong\u003eAnalog weight transmitter L-TLE (RS485)\u003c\/strong\u003e for installation on the rear wall of the control panel on Omega\/DIN rail or in the box (on request) and with backlit LCD display, 38x16 mm, 2 lines of 8 digits (5 mm digit height). Suitable for applications requiring a \u003cstrong\u003efast response time\u003c\/strong\u003e \u003cstrong\u003eof the analog output\u003c\/strong\u003e (update time 0.003...4 sec. \/ 10...30 Hz). Dimensions: 90x95x60 mm. 3-position selector, DIP switch and rotary knob.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures of the L-TLE Analog Weight Transmitter\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e✅Serial \u003cstrong\u003einterface RS485\u003c\/strong\u003e for communication via \u003cstrong\u003eModBus RTU\u003c\/strong\u003e protocols\u003c\/p\u003e\n\u003cp\u003e✅Easy adjustment of zero point and full scale without multimeter, but by digital rotary control (encoder)\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e✅4 load cell inputs\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e✅ \u003cstrong\u003e16 bit\u003c\/strong\u003e \u003cstrong\u003efast\u003c\/strong\u003e \u003cstrong\u003eanalog output\u003c\/strong\u003e in current or voltage: 0...20 mA, 4...20 mA; 0...10 V, 0...5 V; ±10 V, ±5 V; response time: 3 ms)\u003c\/p\u003e\n\u003cp\u003e✅Connections to: PLC via analog output, PC\/PLC via RS485 (up to 99 instruments with amplifiers, up to 32 without amplifiers), up to 8 load cells in parallel with junction box\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e✅Simultaneous display of the load cell response signal expressed in mV and the value of the analog output\u003c\/p\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca title=\"octogon Shop\" style=\"color: #d84f1b;\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/L-TLE_Datenblatt.pdf?v=1711463052\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCAD model:\u003cbr\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TLE.stp?v=1712652139\" style=\"color: #d84f1b;\" title=\"octogon Shop\" target=\"_blank\"\u003eL-TLE CAD model\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"octogon Shop","offers":[{"title":"Default Title","offer_id":49310775411014,"sku":"","price":182.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/waegetransmitter_L-TLE.png?v=1713431511"},{"product_id":"emma-io-link-dms-messverstaerker","title":"EMMA IO-Link strain gauge amplifier","description":"\u003cp\u003e\u003cstrong\u003eIO-Link strain gauge amplifiers EPG-IO\u003c\/strong\u003e for load cells offer various advantages in industrial applications. The combination of IO-Link and strain gauge amplifiers optimizes \u003cstrong\u003edata acquisition and data transmission\u003c\/strong\u003e in load cell applications, resulting in improved process control and efficiency.\u003c\/p\u003e\n\u003cp\u003eThe strain gauge measuring amplifier has a robust plastic housing and is suitable for a wide range of industrial applications.\u003c\/p\u003e\n\u003cp\u003eThis has a connection for a \u003cstrong\u003estrain gauge full bridge\u003c\/strong\u003e. The sensor signal from the application is converted into a standardized IO-Link signal by the measuring amplifier. The measuring transducer uses its power supply to apply a measuring current to the strain gauge bridge. The output signal of the bridge changes proportionally to the change in force and is passed on by the IO-Link interface as a digital signal.\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures of the EPG-IO IO-Link strain gauge amplifier\u003cbr\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e✅Input: \u003cstrong\u003e1 DMS full bridge\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e✅Measuring range: freely adjustable in the range -32000...+32000\u003c\/p\u003e\n\u003cp\u003e✅Combined error \u003cstrong\u003e\u0026lt;±0.05%\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e✅Output: \u003cstrong\u003eIO-Link\u003c\/strong\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e✅Resolution: \u003cstrong\u003e16 bit\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e✅Strain gauge supply: 3 VDC\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e✅Dimensions: 72x28x35 mm (without electrical connection)\u003c\/p\u003e\n\u003cp\u003e✅Protection class: \u003cstrong\u003eat least IP65\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e✅Compatible with other manufacturers\u003c\/p\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/IO-Link_DMS_Messverstaerker_EPG-IO.pdf?v=1711460776\" title=\"octogon Shop\" style=\"color: #d84f1b;\"\u003eDatasheet\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"octogon Shop","offers":[{"title":"traction sensor","offer_id":49469983719750,"sku":"","price":261.0,"currency_code":"EUR","in_stock":true},{"title":"pressure force sensor","offer_id":49469983752518,"sku":"","price":261.0,"currency_code":"EUR","in_stock":true},{"title":"tension\/compression force sensor","offer_id":49469983785286,"sku":"","price":261.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/IO-Link_EPG-IO.png?v=1713777034"},{"product_id":"ealb-summierbox","title":"EALB summing box","description":"\u003cp\u003e\u003cstrong\u003eThe L-CE41N summing box\u003c\/strong\u003e is a robust junction box made of \u003cstrong\u003eABS\u003c\/strong\u003e and offers a versatile and flexible design thanks to its different versions. The housing is \u003cstrong\u003eIP67\u003c\/strong\u003e certified and is extremely durable, allowing worry-free use.\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures of the L-CE41N summing box\u003cbr\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e✅Material: \u003cstrong\u003eABS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e✅Operating temperature: \u003cstrong\u003e-20°C to +60°C\u003c\/strong\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e✅ \u003cstrong\u003eConnection\u003c\/strong\u003e for load cells with \u003cstrong\u003e4\/6 wires\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e✅Particularly robust for tough continuous use in the industrial sector\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003ca title=\"octogon Shop\" style=\"color: #d84f1b;\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/L-CE41N_Datenblatt.pdf?v=1712579388\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e CAD model: \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/CE41N_C41N.stp?v=1712652034\" style=\"color: #d84f1b;\" title=\"octogon Shop\" target=\"_blank\"\u003eL-CE41N\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"octogon Shop","offers":[{"title":"CE41N - equalization","offer_id":49420087230790,"sku":"","price":76.0,"currency_code":"EUR","in_stock":true},{"title":"CE41NR - equalization","offer_id":49420087329094,"sku":"","price":81.0,"currency_code":"EUR","in_stock":true},{"title":"CE81PN - equalization","offer_id":49420087394630,"sku":"","price":140.0,"currency_code":"EUR","in_stock":true},{"title":"CE81PNR - equalization","offer_id":49420087460166,"sku":"","price":151.0,"currency_code":"EUR","in_stock":true},{"title":"CIP67N - parallel","offer_id":49420087525702,"sku":"","price":54.0,"currency_code":"EUR","in_stock":true},{"title":"C41N - parallel","offer_id":49420087591238,"sku":"","price":65.0,"currency_code":"EUR","in_stock":true},{"title":"C41NR - parallel","offer_id":49420087656774,"sku":"","price":70.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/Summierbox_L-CE41N.png?v=1713433533"},{"product_id":"eala-summierbox","title":"EALA summing box","description":"\u003cp\u003e\u003cstrong\u003eThe L-CE41INOX summing box\u003c\/strong\u003e is a robust junction box made of \u003cstrong\u003eAISI 304 stainless steel\u003c\/strong\u003e and offers a versatile and flexible design thanks to its different versions. The housing is \u003cstrong\u003eIP67\u003c\/strong\u003e certified and is extremely durable, allowing worry-free use.\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures of the L-CE41INOX summing box\u003cbr\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e✅Material: \u003cstrong\u003estainless steel AISI 304\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e✅Operating temperature: \u003cstrong\u003e-20°C to +60°C\u003c\/strong\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e✅ \u003cstrong\u003eConnection\u003c\/strong\u003e for load cells with \u003cstrong\u003e4\/6 wires\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✅\u003c\/strong\u003e Particularly robust for tough continuous use in the industrial sector\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca title=\"octogon Shop\" style=\"color: #d84f1b;\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/L-CE41INOX_Datenblatt.pdf?v=1712579388\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCAD model:\u003cbr\u003e \u003ca title=\"octogon Shop\" style=\"color: #d84f1b;\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/CE41INOX_CE41ATEX.stp?v=1712652029\" target=\"_blank\"\u003eL-CE41INOX\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"octogon Shop","offers":[{"title":"CE41INOX - equalization","offer_id":49420096012614,"sku":"","price":140.0,"currency_code":"EUR","in_stock":true},{"title":"CE81INOX - equalization","offer_id":49420096045382,"sku":"","price":189.0,"currency_code":"EUR","in_stock":true},{"title":"CE41INOXP - equalization","offer_id":49420096078150,"sku":"","price":108.0,"currency_code":"EUR","in_stock":true},{"title":"C41INOXP - Parallel","offer_id":49420096110918,"sku":"","price":97.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/Summierbox_L-CE41INOX.png?v=1713776029"},{"product_id":"emla-miniatur-dms-messverstaerker","title":"EMLA miniature strain gauge amplifier","description":"\u003cp class=\"eotech_product_subheadline\"\u003eThe \u003cstrong\u003eminiature strain gauge amplifiers\u003c\/strong\u003e EMLA from octogon are ideal for universal signal conditioning of resistive strain gauge measuring bridges. They amplify the mV sensor signal of force and strain sensors for control inputs. Two fittings are provided on the board for mounting, so the amplifier can be fastened easily with two screws. This makes it possible to amplify the strain gauge sensor signal on site into a robust standard signal (analog output | 0-10 V or 4-20 mA).\u003c\/p\u003e\n\u003cp\u003eAt octogon, we understand that your individual projects need our special attention. That is why we can develop a tailor-made, customer-specific solution. This lets us offer you the best solution for every application at a first-class price-performance ratio.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eFeatures of the miniature strain gauge amplifiers\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e✅\u003c\/span\u003e1-channel strain gauge amplifier\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e✅\u003c\/span\u003eConnection: connector or integration into the cable\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e✅\u003c\/span\u003eDimensions: 52mm x 32.5mm x 16mm\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e✅\u003c\/span\u003eAnalog output: -10V...+10V, 0...10V, 4...20mA, 0...5V, ±5V, 0...20mA\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e✅\u003c\/span\u003eInput sensitivity: 0.1mV\/V...8mV\/V\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e✅\u003c\/span\u003eData rate: 1Hz...25kHz\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e✅\u003c\/span\u003eSupply voltage: 12V...24V DC\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e✅\u003c\/span\u003eProtection: IP00\/IP66\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #d84f1b;\"\u003e\u003ca style=\"color: #d84f1b;\" title=\"Miniature strain gauge amplifier datasheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/Messverstaerker_EPC_deutsch_-_05062023.pdf?v=1734011353\"\u003e\u003cstrong\u003eDatasheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"octogon Online Shop","offers":[{"title":"Default Title","offer_id":53822789878086,"sku":"","price":320.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/Miniatur_DMS_Messverstaerker_EPC.png?v=1734009929"},{"product_id":"efma-wireless-bluetooth-transmitter","title":"EFMA wireless Bluetooth transmitter","description":"\u003cp\u003e\u003cstrong\u003eWireless Bluetooth Transmitter B24\u003c\/strong\u003e with app for iOS \u0026amp; Android devices.\u003c\/p\u003e\n\u003cp\u003eOur Bluetooth\u003csup\u003e®\u003c\/sup\u003e radio system was developed as a direct connection between mobile devices and sensors and delivers high-quality measurement data to iOS and Android phones and tablets.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFree Service\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eIf you purchase the Wireless Bluetooth Transmitter together with a load cell, force transducer or similar, we will connect the sensor and load cell for you free of charge. If we have any open questions, one of our sales representatives will contact you.\u003c\/p\u003e\n\u003cp\u003eWith a wide sensitivity range for many strain sensors, such as \u003cstrong\u003eload cells\u003c\/strong\u003e or \u003cstrong\u003eforce transducers\u003c\/strong\u003e, the transmitter is ideally suited for weight, force, pressure and strain gauge measurements.\u003c\/p\u003e\n\u003cp\u003eData from \u003cstrong\u003emultiple sensors\u003c\/strong\u003e can be received. Our point-to-point system transmits multiple transmitters to one or more mobile devices and uses Bluetooth Low Energy (BLE) 4.0, which is remarkably power-saving.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur mobile app interface creates clear dashboards for practical measurements and is \u003cstrong\u003efree of charge\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures Wireless Bluetooth Transmitter\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e✅Wide \u003cstrong\u003esensitivity input\u003c\/strong\u003e - choose between +\/- 6mV\/V, +\/- 12 mV\/V, +\/- 24 mV\/V, +\/- 48mV\/V\u003c\/p\u003e\n\u003cp\u003e✅Noise-free resolution up to 110,000 counts (16.75 bits)\u003c\/p\u003e\n\u003cp\u003e✅Up to \u003cstrong\u003e3 months continuous operation\u003c\/strong\u003e at three samples per second.\u003c\/p\u003e\n\u003cp\u003e✅Monitoring of up to 12 transmitters by a single device or multiple devices\u003c\/p\u003e\n\u003cp\u003e✅\u003cstrong\u003eFree View App\u003c\/strong\u003e for IOS \u0026amp; Android\u003c\/p\u003e\n\u003cp\u003e✅Ideal for near-field monitoring up to 90 meters (295 ft)\u003c\/p\u003e\n\u003cp\u003e✅Available in C-housing (IP67) with integrated battery holder for two standard AA batteries or in bare board format for OEM applications (on request)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003ca title=\"octogon Shop\" style=\"color: #d84f1b;\" rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/Wireless_bluetooth_transmitter_B24_datasheet.pdf?v=1744187931\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"octogon Online Shop","offers":[{"title":"Default Title","offer_id":53914840858950,"sku":"B24-SSBC","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/Wireless_bluetooth_transmitter_B24_1.png?v=1736262279"},{"product_id":"efmc-wireless-funk-transmitter","title":"EFMC wireless transmitter","description":"\u003cp\u003eThe \u003cstrong\u003eWireless Radio Transmitter\u003c\/strong\u003e T24-ACMi-SA enables the construction of wireless multipoint-capable data acquisition systems for industrial sensor applications.\u003c\/p\u003e\n\u003cp\u003eThe T24 Wireless Telemetry Sensor System is a modular wireless solution for industrial sensor applications, for example in conjunction with \u003cstrong\u003eload cells\u003c\/strong\u003e or \u003cstrong\u003eforce transducers\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFree Service\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eIf you purchase the Wireless Bluetooth Transmitter together with a load cell, force transducer or similar, we will connect the sensor and load cell for you \u003cstrong\u003efree of charge\u003c\/strong\u003e. If we have any open questions, one of our sales representatives will contact you.\u003c\/p\u003e\n\u003cp\u003eHigh-precision, high-quality measurements are made possible with simple yet powerful configuration and monitoring software.\u003c\/p\u003e\n\u003cp\u003eForce and strain transmitter module in a medium weatherproof housing, with battery holder for two AA batteries.\u003c\/p\u003e\n\u003cp\u003eAlthough all T24 modules actually function as both receivers and transmitters, they are mainly used as either transmitters or receivers. Therefore, they are referred to as transmitters and receivers.\u003cbr\u003eThe T24 system was designed so that transmitters can send messages at a user-defined rate. The receivers can then analyze, display, or perform other actions with this data, depending on their function.\u003c\/p\u003e\n\u003cp\u003eA PC and a base station are only required to configure the modules, although they can be part of a data acquisition system.\u003cbr\u003eOnce configured, the T24 modules operate autonomously and only minimal control over the transmitter or receiver modules is required, such as sleeping or waking up.\u003c\/p\u003e\n\u003ch2\u003eFree Software for Wireless Radio Transmitter\u003c\/h2\u003e\n\u003cp\u003eThere are two \u003cstrong\u003efree\u003c\/strong\u003e software setups for Windows PCs.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eT24 Toolkit\u003c\/strong\u003e is used for configuration and calibration of the modular telemetry system\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eT24 Log100\u003c\/strong\u003e is the logging and visualization software for monitoring and data acquisition\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003ca title=\"octogon Shop\" style=\"color: #d84f1b;\" rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/Wireless_funk_transmitter_T24_casing_information.pdf?v=1744187933\" target=\"_blank\"\u003eData sheet\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"octogon Online Shop","offers":[{"title":"Default Title","offer_id":53921171538246,"sku":"","price":886.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/Wireless_funk_transmitter_T24.png?v=1744188785"},{"product_id":"efmb-wireless-funk-basisstation","title":"EFMB wireless base station","description":"\u003cp\u003eThe \u003cstrong\u003eT24 Wireless Telemetry Dongle Base Station (T24-BSd)\u003c\/strong\u003e is the smallest base station in our range and offers a range of up to 500 meters for all wireless telemetry modules, such as the T24-ACMi-SA.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis wireless radio base station is powered via the USB bus and therefore requires no other components for the configuration and control of remote devices. This plug-and-play USB base station is a portable, cable-free (wireless) solution, ideal for laptops and tablets with a full version of Windows.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures of the Wireless Radio Base Station\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e✅Provides wireless data from T24 transmitter modules\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e✅\u003cstrong\u003eUp to 500 m\u003c\/strong\u003e (1,600 ft) radio range\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e✅Configures any T24 telemetry module via USB\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e✅Portable device designed for laptops and tablets\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e✅Ideal for \u003cstrong\u003eportable logging with 100-channel logging and display software\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e✅IP50 housing dimensions 45 x 19 x 11 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003ca title=\"octogon Shop\" style=\"color: #d84f1b;\" rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/Wireless_funk_transmitter_T24_datasheet.pdf?v=1744187932\" target=\"_blank\"\u003eData sheet\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"octogon Online Shop","offers":[{"title":"Default Title","offer_id":53948271100230,"sku":"","price":350.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/basisstation_wireless_funkt_transmitter_T24.png?v=1744188759"},{"product_id":"edla-digitale-fernanzeige-5-stellen-a-57-mm","title":"EDLA digital remote display, 5 digits of 57 mm","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDigital Remote Display EDLA\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe compact remote display EDLA from octogon offers a clear and easily visible representation of your weight data. This model with large digits is specially designed for uncomplicated wall mounting.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eKey features at a glance:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\n\u003cli class=\"MsoNormal\" style=\"mso-list: l1 level1 lfo1; tab-stops: list 36.0pt;\"\u003e\n\n\u003cb\u003eClear Display:\u003c\/b\u003e The device features a 5-digit, semi-alphanumeric red LED display. With a digit height of 57 mm, precise reading is easily possible.\u003c\/li\u003e\n\n\u003cli class=\"MsoNormal\" style=\"mso-list: l1 level1 lfo1; tab-stops: list 36.0pt;\"\u003e\n\n\u003cb\u003eRobust Housing:\u003c\/b\u003e The electronics are securely housed in a durable plastic casing. With IP56 protection, the display is optimally protected against dust and splashing water.\u003c\/li\u003e\n\n\u003cli class=\"MsoNormal\" style=\"mso-list: l1 level1 lfo1; tab-stops: list 36.0pt;\"\u003e\n\n\u003cb\u003eFlexible Interfaces:\u003c\/b\u003e Communication is reliably handled via serial RS232 and RS422 interfaces. The device supports versatile baud rates from 1200 to 57600 bit\/s.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eTechnical Highlights:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo2; tab-stops: list 36.0pt;\"\u003e\n\n\u003cb\u003eDimensions:\u003c\/b\u003e Compact dimensions of 310 x 230 x 130 mm.\u003c\/li\u003e\n\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo2; tab-stops: list 36.0pt;\"\u003e\n\n\u003cb\u003ePower Supply \u0026amp; Consumption:\u003c\/b\u003e Operates with 12 to 24 VDC with low consumption of 10 W.\u003c\/li\u003e\n\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo2; tab-stops: list 36.0pt;\"\u003e\n\n\u003cb\u003eEnvironmental Conditions:\u003c\/b\u003e Reliable operation at temperatures from -10 °C to +40 °C and humidity of up to 85 % (non-condensing). Storage temperature ranges from -20 °C to +50 °C.\u003c\/li\u003e\n\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo2; tab-stops: list 36.0pt;\"\u003e\n\n\u003cb\u003eCertifications:\u003c\/b\u003e The device meets all important standards and is CE and UKCA certified.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":56670368301382,"sku":null,"price":649.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/L_RIP550SHA_5_Stelliges_Fernanzeige.png?v=1780040802"},{"product_id":"edlc-digitale-fernanzeige-2-zeilen-a-8-ziffern","title":"EDLC digital remote display, 2 lines of 8 digits","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eEDLC Digital Remote Display\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe compact EDLC remote display provides a clear and highly visible representation of your weight data. This large-digit model features two lines of eight digits each and is specifically designed for straightforward wall mounting.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eKey features at a glance:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\n\u003cli class=\"MsoNormal\" style=\"mso-list: l1 level1 lfo1; tab-stops: list 36.0pt;\"\u003e\n\n\u003cb\u003eClear display:\u003c\/b\u003e The device features a 5-digit, semi-alphanumeric red LED display. With a digit height of 57 mm, precise reading is easily possible.\u003c\/li\u003e\n\n\u003cli class=\"MsoNormal\" style=\"mso-list: l1 level1 lfo1; tab-stops: list 36.0pt;\"\u003e\n\n\u003cb\u003eRobust housing:\u003c\/b\u003e The electronics are securely housed in a plastic enclosure. With an IP56 protection rating, the display is optimally protected against dust and water jets.\u003c\/li\u003e\n\n\u003cli class=\"MsoNormal\" style=\"mso-list: l1 level1 lfo1; tab-stops: list 36.0pt;\"\u003e\n\n\u003cb\u003eFlexible interfaces:\u003c\/b\u003e Communication is reliable via serial RS232 and RS422 interfaces. The device supports versatile baud rates from 1200 to 57600 bit\/s.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eTechnical highlights:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo2; tab-stops: list 36.0pt;\"\u003e\n\n\u003cb\u003eDimensions:\u003c\/b\u003e Compact dimensions of 310 x 230 x 130 mm.\u003c\/li\u003e\n\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo2; tab-stops: list 36.0pt;\"\u003e\n\n\u003cb\u003ePower supply \u0026amp; performance:\u003c\/b\u003e Operates on 12 to 24 VDC with a low consumption of 10 W.\u003c\/li\u003e\n\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo2; tab-stops: list 36.0pt;\"\u003e\n\n\u003cb\u003eEnvironmental conditions:\u003c\/b\u003e Reliable operation at temperatures from -10 °C to +40 °C and humidity up to 85% (non-condensing). The storage temperature ranges from -20 °C to +50 °C.\u003c\/li\u003e\n\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo2; tab-stops: list 36.0pt;\"\u003e\n\n\u003cb\u003eCertifications:\u003c\/b\u003e The device meets all important standards and is CE and UKCA certified.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":56670410539334,"sku":null,"price":1441.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/L_RIPDOSMANHA_2_Zeilen_8_Ziffern_Fernanzeige.png?v=1780041579"},{"product_id":"edld-digitale-fernanzeige-5-stellen-a-100-mm-punktmatrix","title":"EDLD digital remote display, 5 digits of 100 mm, dot matrix","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eEDLD Digital Remote Display\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe EDLD remote display from octogon offers a clear representation of weight data and is specifically designed for wall mounting. With its extra-large digits, it ensures maximum transparency in your operational processes.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eKey features at a glance:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo1; tab-stops: list 36.0pt;\"\u003e\n\n\u003cb\u003eClear display:\u003c\/b\u003e The device features a 5-digit alphanumeric dot-matrix display. With an impressive digit height of 100 mm and integrated brightness control, precise reading is easily possible even from a greater distance.\u003c\/li\u003e\n\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo1; tab-stops: list 36.0pt;\"\u003e\n\n\u003cb\u003eRobust housing:\u003c\/b\u003e The electronics are securely housed in a plastic enclosure. With an IP56 protection rating, the display is reliably protected against dust and water.\u003c\/li\u003e\n\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo1; tab-stops: list 36.0pt;\"\u003e\n\n\u003cb\u003eFlexible interfaces:\u003c\/b\u003e Communication with your weighing system takes place via serial RS232 and RS422 interfaces. The device supports versatile baud rates from 1200 to 57600 bit\/s.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eTechnical highlights:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\n\u003cli class=\"MsoNormal\" style=\"mso-list: l1 level1 lfo2; tab-stops: list 36.0pt;\"\u003e\n\n\u003cb\u003eDimensions:\u003c\/b\u003e 468 x 390 x 130 mm.\u003c\/li\u003e\n\n\u003cli class=\"MsoNormal\" style=\"mso-list: l1 level1 lfo2; tab-stops: list 36.0pt;\"\u003e\n\n\u003cb\u003ePower supply \u0026amp; performance:\u003c\/b\u003e Operation at 12 to 24 VDC with a consumption of 20 W.\u003c\/li\u003e\n\n\u003cli class=\"MsoNormal\" style=\"mso-list: l1 level1 lfo2; tab-stops: list 36.0pt;\"\u003e\n\n\u003cb\u003eEnvironmental conditions:\u003c\/b\u003e Reliable use at operating temperatures from -10 °C to +40 °C and humidity levels of up to 85% (non-condensing). The storage temperature ranges from -20 °C to +50 °C.\u003c\/li\u003e\n\n\u003cli class=\"MsoNormal\" style=\"mso-list: l1 level1 lfo2; tab-stops: list 36.0pt;\"\u003e\n\n\u003cb\u003eCertifications:\u003c\/b\u003e The device meets all important standards and is CE and UKCA certified.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":56670434033990,"sku":null,"price":1265.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/L_RIPLED5100_5_Stellige_Fernanzeige.png?v=1780041845"},{"product_id":"edlf-digitale-fernanzeige-ip65","title":"EDLF digital remote display, IP65","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDigital remote display EDLF\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe EDLF digital remote display with extra large digits is the ideal, robust solution for outdoor wall mounting.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eThe most important data at a glance:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo1; tab-stops: list 36.0pt;\"\u003e\n\n\u003cb\u003eClear display:\u003c\/b\u003e 6-digit red LED display (95 mm digit height), 4 indicator LEDs, red\/green traffic light function and brightness control.\u003c\/li\u003e\n\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo1; tab-stops: list 36.0pt;\"\u003e\n\n\u003cb\u003eWeatherproof housing (IP65):\u003c\/b\u003e Anodized aluminum profile with anti-condensation valve.\u003c\/li\u003e\n\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo1; tab-stops: list 36.0pt;\"\u003e\n\n\u003cb\u003eInterfaces:\u003c\/b\u003e RS232 and RS485 (baud rate 9600 bit\/s), conveniently configurable via PC.\u003c\/li\u003e\n\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo1; tab-stops: list 36.0pt;\"\u003e\n\n\u003cb\u003eTechnology \u0026amp; Dimensions:\u003c\/b\u003e 745 x 160 x 50 mm, power supply 110 or 240 VAC (\u0026lt;10 VA), operating temperature -10 °C to +50 °C.\u003c\/li\u003e\n\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo1; tab-stops: list 36.0pt;\"\u003e\n\n\u003cb\u003eScope of delivery:\u003c\/b\u003e Ready for mounting including 1.3 m power cable and wall bracket.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eA sun and rain protection is optionally available for more extreme weather conditions.\u003c\/p\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":56670450123078,"sku":null,"price":1056.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/ELAFSNIP.png?v=1780042389"},{"product_id":"edlg-digitale-fernanzeige-6-stellen","title":"EDLG digital remote display, 6 digits","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eDigital remote display EDLG\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eWith its large digits, the EDLG digital remote display is ideal for wall mounting. It provides a clear display of your weight data in a compact format.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eThe most important data at a glance:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo1; tab-stops: list 36.0pt;\"\u003e\n\n\u003cb\u003eClear display:\u003c\/b\u003e The device features a 6-digit, semi-alphanumeric red SMD-LED display with a digit height of 90 mm. In addition, 4 indicator LEDs are integrated.\u003c\/li\u003e\n\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo1; tab-stops: list 36.0pt;\"\u003e\n\n\u003cb\u003eHousing:\u003c\/b\u003e The housing consists of an aluminum profile and offers IP30 protection.\u003c\/li\u003e\n\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo1; tab-stops: list 36.0pt;\"\u003e\n\n\u003cb\u003eInterfaces:\u003c\/b\u003e Serial interfaces (RS232, RS485) are available for communication, operating at a baud rate of 9600 bit\/s. 15 addresses can be set, and the system can be conveniently configured on a PC via the RS232 interface.\u003c\/li\u003e\n\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo1; tab-stops: list 36.0pt;\"\u003e\n\n\u003cb\u003eTechnology \u0026amp; Dimensions:\u003c\/b\u003e The dimensions are 712 x 208.5 x 46.5 mm. The regular power supply is 12 VDC (1.5 A). Reliable operation is possible at temperatures from -10 °C to +50 °C and a humidity of up to 80% (non-condensing).\u003c\/li\u003e\n\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo1; tab-stops: list 36.0pt;\"\u003e\n\n\u003cb\u003eExtensive scope of delivery:\u003c\/b\u003e A power supply unit (input 100-240 VAC to 12 VDC\/2 A) with a 1.2 m cable length is included. In addition, a 5 m long cable for the serial connection and the corresponding brackets for wall mounting are already included.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":56670454513990,"sku":null,"price":528.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/ELAGSNIP.png?v=1780042854"},{"product_id":"edoa-waegezellen-anzeige-zum-fronttafeleinbau","title":"EDOA load cell display for panel mounting","description":"\u003cp\u003eThe \u003cstrong\u003eEDOA\u003c\/strong\u003e is a \u003cstrong\u003eload cell indicator\u003c\/strong\u003e with an alphanumeric LED display for panel mounting.\u003c\/p\u003e\n\u003cp\u003eIt is intended for laboratory instrumentation, factory automation, and industrial process monitoring.\u003c\/p\u003e\n\u003cp\u003eThe display shows \u003cstrong\u003e5 characters plus sign\u003c\/strong\u003e with a digit height of \u003cstrong\u003e11.4 mm\u003c\/strong\u003e, which corresponds to a measurement resolution of up to \u003cstrong\u003e4.5 digits\u003c\/strong\u003e; in addition, there are \u003cstrong\u003e3 status LEDs\u003c\/strong\u003e for alarm, max, and min. Operation is via \u003cstrong\u003efour capacitive touch sensors\u003c\/strong\u003e on the front panel. The display is updated \u003cstrong\u003e2.5 times per second\u003c\/strong\u003e, and the brightness can be adjusted from \u003cstrong\u003e20% to 100%\u003c\/strong\u003e in \u003cstrong\u003e10%\u003c\/strong\u003e increments.\u003c\/p\u003e\n\u003cp\u003eAvailable measurement inputs are \u003cstrong\u003e0–10 V\u003c\/strong\u003e and \u003cstrong\u003e4–20 mA\u003c\/strong\u003e, complemented by a load cell input for \u003cstrong\u003e1–2 mV\/V\u003c\/strong\u003e; the common-mode input range is \u003cstrong\u003e±48 V\u003c\/strong\u003e. The accuracy is typically \u003cstrong\u003e0.05% of full scale\u003c\/strong\u003e and a maximum of \u003cstrong\u003e0.2% of full scale\u003c\/strong\u003e. Via the menu, the ranges \u003cstrong\u003e0–5 V\u003c\/strong\u003e, \u003cstrong\u003e0–20 mA\u003c\/strong\u003e, and a freely scalable display can be selected. An integrated isolated \u003cstrong\u003esolid-state relay\u003c\/strong\u003e with programmable switching points, hysteresis, and relay test switches up to \u003cstrong\u003e±250 mA\u003c\/strong\u003e at \u003cstrong\u003e±40 V\u003c\/strong\u003e. The \u003cstrong\u003epolycarbonate\u003c\/strong\u003e housing is mounted via a round hole cutout with a nut and seal or via screws. Power is supplied by \u003cstrong\u003e9 to 32 V DC\u003c\/strong\u003e at \u003cstrong\u003e40 mA\u003c\/strong\u003e (12 V) or \u003cstrong\u003e25 mA\u003c\/strong\u003e (24 V). The operating temperature ranges from \u003cstrong\u003e0 °C to +50 °C\u003c\/strong\u003e, and the weight is \u003cstrong\u003e65 g\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eAlphanumeric LED display, 5 characters plus sign, 11.4 mm digit height\u003c\/li\u003e\n\n\u003cli\u003e3 status LEDs for alarm, max, and min\u003c\/li\u003e\n\n\u003cli\u003eOperation via four capacitive touch sensors\u003c\/li\u003e\n\n\u003cli\u003eInputs 0–10 V and 4–20 mA as well as load cell input 1–2 mV\/V\u003c\/li\u003e\n\n\u003cli\u003eAccuracy typically 0.05% of full scale\u003c\/li\u003e\n\n\u003cli\u003eIsolated solid-state relay with programmable switching points\u003c\/li\u003e\n\n\u003cli\u003ePolycarbonate housing for round hole or screw mounting\u003c\/li\u003e\n\n\u003cli\u003eSupply 9 to 32 V DC, 40 mA at 12 V\u003c\/li\u003e\n\n\u003cli\u003eOperating temperature 0 °C to +50 °C\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":56812564513094,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EDOA_Murata-Display_masszeichnung.jpg?v=1788184596"},{"product_id":"ehaa-handheld","title":"EHAA handheld","description":"\u003cp\u003eThe \u003cstrong\u003eEHAA\u003c\/strong\u003e is a professional handheld with a data logger for strain gauge transducers, type \u003cstrong\u003eAE-Star\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt measures force, weight, pressure, torque, and displacement with a single device and is suitable for measurements on test benches, in the field, and during service.\u003c\/p\u003e\n\u003cp\u003eThe analog input is designed for transducer signals of \u003cstrong\u003e±2 mV\/V\u003c\/strong\u003e and resolves with \u003cstrong\u003e24 bits\u003c\/strong\u003e into \u003cstrong\u003e±50,000 divisions\u003c\/strong\u003e. The sampling rate is between \u003cstrong\u003e5 and 4,800 Hz\u003c\/strong\u003e, the accuracy at the external input is \u003cstrong\u003e±0.01% FS\u003c\/strong\u003e, and the relative linearity error is \u003cstrong\u003e≤ ±0.01% FS\u003c\/strong\u003e. The transducer supply is \u003cstrong\u003e5 V DC\u003c\/strong\u003e, the input resistance for half and quarter bridges is \u003cstrong\u003e350 Ω or 700 Ω\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe data logger stores up to \u003cstrong\u003e130,000 readings\u003c\/strong\u003e, and up to \u003cstrong\u003e7 transducers\u003c\/strong\u003e are automatically recognized. The functions ZERO, HOLD, PEAK, and a digital filter are available; the backlit graphical display can be rotated by \u003cstrong\u003e180°\u003c\/strong\u003e. Data transfer and charging occur via the \u003cstrong\u003eUSB\u003c\/strong\u003e interface. The aluminum housing with silicone protective cover measures \u003cstrong\u003e176 x 79 x 32 mm\u003c\/strong\u003e, weighs approximately \u003cstrong\u003e0.7 kg\u003c\/strong\u003e, and is protected according to \u003cstrong\u003eIP40\u003c\/strong\u003e per EN 60529. The internal Li-ion battery achieves approximately \u003cstrong\u003e24 hours\u003c\/strong\u003e of operating time, and the operating temperature range extends from \u003cstrong\u003e+10 °C to +50 °C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHandheld with data logger for strain gauge transducers\u003c\/li\u003e\n\n\u003cli\u003eInput signal ±2 mV\/V, 24-bit resolution, ±50,000 divisions\u003c\/li\u003e\n\n\u003cli\u003eSampling rate 5 to 4,800 Hz\u003c\/li\u003e\n\n\u003cli\u003eAccuracy ±0.01% FS at the external input\u003c\/li\u003e\n\n\u003cli\u003eData logger for up to 130,000 readings\u003c\/li\u003e\n\n\u003cli\u003eUp to 7 transducers are automatically recognized\u003c\/li\u003e\n\n\u003cli\u003eFunctions ZERO, HOLD, PEAK, and digital filter\u003c\/li\u003e\n\n\u003cli\u003eProtection class IP40, aluminum housing with silicone cover\u003c\/li\u003e\n\n\u003cli\u003eLi-ion battery for approx. 24 h, charging via USB\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":56812564545862,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EHAA_AE-Star_titelbild.png?v=1788183072"},{"product_id":"ehoa-mobiler-messverstaerker-mit-datenlogger","title":"EHOA portable amplifier with data logger","description":"\u003cp\u003eThe \u003cstrong\u003eEHOA\u003c\/strong\u003e is a mobile measuring amplifier with data logger for strain gauge transducers in a handheld device, type \u003cstrong\u003eEOD\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt is suitable for measurements on test setups, in the field and in service, where readings are recorded independently of the mains.\u003c\/p\u003e\n\u003cp\u003eFull, half and quarter bridges, potentiometric transducers and voltage signals from \u003cstrong\u003e0 to 10 V\u003c\/strong\u003e can be connected to the \u003cstrong\u003e15-pin Sub-D socket\u003c\/strong\u003e; bridge completion for \u003cstrong\u003e120, 350 and 1,000 Ω\u003c\/strong\u003e is built in. The input sensitivity is selectable in steps of \u003cstrong\u003e1.0 \/ 2.0 \/ 3.5 mV\/V\u003c\/strong\u003e, the bridge excitation is \u003cstrong\u003e2.5 or 5 V\u003c\/strong\u003e. The resolution is \u003cstrong\u003e24 bit\u003c\/strong\u003e, the accuracy class is \u003cstrong\u003e0.05 %\u003c\/strong\u003e and the relative linearity error is \u003cstrong\u003e0.02 % FS\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe data rate ranges from \u003cstrong\u003e0.3125 to 3,000 Hz\u003c\/strong\u003e, recording to the SD card is up to \u003cstrong\u003e1,000 Hz\u003c\/strong\u003e; six sensor configurations are available. The analog output outputs \u003cstrong\u003e-5 to 5 V\u003c\/strong\u003e, \u003cstrong\u003eUSB 2.0\u003c\/strong\u003e Full Speed serves as the interface. The aluminum housing measures \u003cstrong\u003e164 x 105 x 32 mm\u003c\/strong\u003e and is protected according to \u003cstrong\u003eIP51\u003c\/strong\u003e, optionally according to \u003cstrong\u003eIP65\u003c\/strong\u003e. The power supply is \u003cstrong\u003e10 to 29 V\u003c\/strong\u003e, the operating temperature range extends from \u003cstrong\u003e-20 °C to +70 °C\u003c\/strong\u003e. The scope of delivery includes an SD memory card, plug-in power supply, Sub-D mating connector, USB cable, software and manual.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eMobile measuring amplifier with SD card data logger\u003c\/li\u003e\n\n\u003cli\u003eFull, half and quarter bridge, potentiometric and 0 to 10 V\u003c\/li\u003e\n\n\u003cli\u003eBridge completion for 120, 350 and 1,000 Ω built in\u003c\/li\u003e\n\n\u003cli\u003eResolution 24 bit, accuracy class 0.05 %\u003c\/li\u003e\n\n\u003cli\u003eData rate 0.3125 to 3,000 Hz, recording up to 1,000 Hz\u003c\/li\u003e\n\n\u003cli\u003eSix sensor configurations available\u003c\/li\u003e\n\n\u003cli\u003eReal-time clock and battery operation\u003c\/li\u003e\n\n\u003cli\u003eProtection class IP51, optionally IP65\u003c\/li\u003e\n\n\u003cli\u003eUSB 2.0 and analog output -5 to 5 V\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":56812564578630,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EHOA_EOD_titelbild.png?v=1788183073"},{"product_id":"ehob-handheld-fuer-waegezellen","title":"EHOB handheld for load cells","description":"\u003cp\u003e\u003cspan\u003eThe EHOB \u003cstrong\u003ehandheld\u003c\/strong\u003e combines measurement, curve, and peak value display in one handy device\u003c\/span\u003e\u003cspan\u003e. It accepts any Wheatstone full bridge—such as those from \u003cstrong\u003eload cells\u003c\/strong\u003e and force transducers—via an M12 socket and displays the measured value on a color LCD as a numerical value, live curve, or saved data record\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\u003ch3\u003eKey features at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eColor LCD display:\u003c\/b\u003e Equipped with a 3.5-inch color LCD with a resolution of 320x480 pixels\u003c\/span\u003e\u003cspan\u003e. The display offers various modes such as real-time data, live curves, historical graphs, and an overview of saved data records\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eHigh sampling rate \u0026amp; precision:\u003c\/b\u003e Supports full bridges from 88 ohms to 5 kOhm with a high measurement accuracy of 0.05%\u003c\/span\u003e\u003cspan\u003e. The sampling rate is adjustable in steps of 50, 200, 800, up to 3,200 Hz\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eStorage \u0026amp; alarm function:\u003c\/b\u003e Peak and valley values are automatically recorded, with up to 200 corresponding data records saved in the device\u003c\/span\u003e\u003cspan\u003e. Additionally, two alarm points can be set for upper\/lower limits or a 20 percent overload\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eMobility \u0026amp; power:\u003c\/b\u003e Powered by an integrated, rechargeable 3,200 mAh battery, which is conveniently charged via USB-C\u003c\/span\u003e\u003cspan\u003e. Weighing 290 g and featuring IP65 protection, the handy device is ideal for mobile use\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eSensor compatibility:\u003c\/b\u003e Wheatstone full bridge 88...5000 ohms\u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eExcitation voltage:\u003c\/b\u003e 3 V DC\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eMeasuring range \u0026amp; units:\u003c\/b\u003e Measuring range of 4mV\/V\u003c\/span\u003e\u003cspan\u003e Supported units are lb, N, g, Nm, mV\/V, kN, and kg\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eInterfaces \u0026amp; protocols:\u003c\/b\u003e Equipped with USB-C and RS485\u003c\/span\u003e\u003cspan\u003e. Supports Modbus-RTU, ASCII active upload, and HEX custom upload protocols\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eConnection:\u003c\/b\u003e 5-pin M12 socket\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eOperating conditions:\u003c\/b\u003e Operating temperature of -20...+50°C \u003c\/span\u003e\u003cspan\u003e IP65 protection class\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eDimensions:\u003c\/b\u003e 132 mm width and 20 mm depth\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon Shop","offers":[{"title":"Default Title","offer_id":56812564611398,"sku":null,"price":540.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EHOB_EOE_-_EPE__octogon-EPE-solo_af44f493-50e9-4f30-a58c-e854be754607.png?v=1789021158"},{"product_id":"eilc-waegeindikator-im-gehaeuse-ip67-und-profibus-dp","title":"EILC weighing indicator in enclosure, IP67 and PROFIBUS-DP","description":"\u003ch1\u003eEILC weighing indicator in IP67 housing\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eThe EILC weighing indicator from octogon offers professional weighing and dosing technology for direct wall mounting in harsh industrial environments where a classic control panel is not available\u003c\/span\u003e\u003cspan\u003e. The device is housed in a robust IP67-rated polycarbonate enclosure and is connected via four cable glands\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\u003ch3\u003eKey features at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eRobust design:\u003c\/b\u003e Equipped with a dustproof and waterproof IP67 polycarbonate housing for wall mounting (dimensions: 170 x 140 x 95 mm)\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eEasy-to-read display:\u003c\/b\u003e Features a 6-digit red LED display with 14 mm digit height as well as 8 status LEDs and 5-key operation\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eAutonomous dosing:\u003c\/b\u003e Supports up to 99 batching formulas and independently executes dosing sequences including automatic flight compensation, tolerance control, and fine\/coarse dosing functions\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eLoad cell connection:\u003c\/b\u003e Can connect up to eight 350-ohm load cells in parallel via a high-precision 24-bit A\/D converter\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eAvailable program variants\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eBASE:\u003c\/b\u003e For standard weighing with setpoints and hysteresis\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eLOAD:\u003c\/b\u003e Specially for filling containers and structures\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eUNLOAD:\u003c\/b\u003e Optimized for emptying systems and big bags\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eMULTI PRODUCT (3 \/ 6 \/ 14):\u003c\/b\u003e For complex multi-product dosing including external relay modules\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePower supply:\u003c\/b\u003e 12 to 24 VDC\u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eSerial interfaces:\u003c\/b\u003e RS485 and RS232 (supports Modbus RTU, ASCII, and continuous one-way transmission)\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eInputs and outputs:\u003c\/b\u003e 5 relay outputs (max. 115 VAC \/ 150 mA) and 3 opto-isolated PNP digital inputs\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eOptions \u0026amp; interfaces:\u003c\/b\u003e 16-bit analog output as well as various fieldbus and Ethernet modules (e.g., CANopen, PROFIBUS-DP, Modbus\/TCP with integrated web app) upon request\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eOperating temperatures:\u003c\/b\u003e -20 °C to +60 °C (in the legal-for-trade range -10 °C to +40 °C)\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eCertifications:\u003c\/b\u003e Comprehensive approvals such as CE, UKCA, OIML, NTEP, EAC, and NMI\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon Shop","offers":[{"title":"Default Title","offer_id":56812564644166,"sku":null,"price":600.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/Waegeindikator-L-W200BOX.png?v=1787302497"},{"product_id":"eild-waegeindikator-im-polycarbonat-gehaeuse-ip64","title":"EILD weighing indicator in polycarbonate enclosure, IP64","description":"\u003cp\u003eThe \u003cstrong\u003eEILD\u003c\/strong\u003e is a weighing indicator with external controls in a polycarbonate housing, type \u003cstrong\u003eW200BOXEC\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt is designed for dosing tasks directly at the machine: the selector switch as well as the start and stop buttons are located in the housing lid, allowing recipe changes and cycle start to be carried out at the scale.\u003c\/p\u003e\n\u003cp\u003eThe weighing input accepts up to \u003cstrong\u003e8 load cells with 350 Ω\u003c\/strong\u003e in 4- or 6-wire technology. The A\/D converter operates with \u003cstrong\u003e24 bit\u003c\/strong\u003e and \u003cstrong\u003e16,000,000 points\u003c\/strong\u003e at \u003cstrong\u003e4.8 kHz\u003c\/strong\u003e and delivers \u003cstrong\u003e300 conversions per second\u003c\/strong\u003e; the usable sensitivity is \u003cstrong\u003e±7 mV\/V\u003c\/strong\u003e with a measuring range of \u003cstrong\u003e±39 mV\u003c\/strong\u003e. Linearity is \u003cstrong\u003e\u0026lt; 0.01% FS\u003c\/strong\u003e, and temperature drift is \u003cstrong\u003e\u0026lt; 0.0005% FS\/°C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe 6-digit red LED display has a \u003cstrong\u003e14 mm\u003c\/strong\u003e digit height, plus 8 status LEDs and a 5-button keyboard. The device offers \u003cstrong\u003e5 relay outputs\u003c\/strong\u003e, \u003cstrong\u003e3 opto-isolated PNP inputs\u003c\/strong\u003e, and serial interfaces \u003cstrong\u003eRS485 and RS232\u003c\/strong\u003e with \u003cstrong\u003eModbus RTU\u003c\/strong\u003e, ASCII or continuous transmission; analog output, fieldbus and Ethernet modules are available on request. The housing measures \u003cstrong\u003e170 x 140 x 95 mm\u003c\/strong\u003e, is protected according to \u003cstrong\u003eIP64\u003c\/strong\u003e and is wall-mounted. Power supply is \u003cstrong\u003e12 to 24 V DC\u003c\/strong\u003e at \u003cstrong\u003e5 W\u003c\/strong\u003e, the operating temperature range is from \u003cstrong\u003e-20 °C to +60 °C\u003c\/strong\u003e. Approved versions are certified according to \u003cstrong\u003eOIML R76:2006\u003c\/strong\u003e, Class III, with 3 x 10,000 divisions.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eWeighing indicator in polycarbonate housing, protection class IP64, for wall mounting\u003c\/li\u003e\n\n\u003cli\u003eSelector switch as well as start and stop button in the lid\u003c\/li\u003e\n\n\u003cli\u003eUp to 8 load cells with 350 Ω\u003c\/li\u003e\n\n\u003cli\u003eA\/D converter 24 bit, 16,000,000 points, 300 conversions per second\u003c\/li\u003e\n\n\u003cli\u003e6-digit red LED display, 14 mm digit height\u003c\/li\u003e\n\n\u003cli\u003e99 dosing recipes with automatic fall calculation and tolerance control\u003c\/li\u003e\n\n\u003cli\u003e5 relay outputs and 3 opto-isolated PNP inputs\u003c\/li\u003e\n\n\u003cli\u003eRS485 and RS232 with Modbus RTU\u003c\/li\u003e\n\n\u003cli\u003eOIML R76:2006, Class III, 3 x 10,000 divisions\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":56812564676934,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EILD_W200BOXEC_titelbild.png?v=1788183073"},{"product_id":"eile-waegeindikator-mit-lcd-anzeige-6-stellig-ip67","title":"EILE weighing indicator with LCD display, 6 digits, IP67","description":"\u003cp\u003eThe \u003cstrong\u003eEILE\u003c\/strong\u003e is a weighing indicator with a backlit LCD display in an ABS housing, type \u003cstrong\u003eWDESK-L\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt is designed for weighing and dosing tasks directly at the scale and can be used as a desktop, wall, column, or panel-mounted device.\u003c\/p\u003e\n\u003cp\u003eThe 6-digit semi-alphanumeric display has a digit height of \u003cstrong\u003e20 mm\u003c\/strong\u003e, is backlit, and shows \u003cstrong\u003e46 status symbols\u003c\/strong\u003e; it is operated via a \u003cstrong\u003e6-button membrane keypad\u003c\/strong\u003e. The weighing input accepts up to \u003cstrong\u003e8 load cells with 350 Ω\u003c\/strong\u003e in 4- or 6-wire technology. The A\/D converter operates with \u003cstrong\u003e24 bit\u003c\/strong\u003e and \u003cstrong\u003e16,000,000 points\u003c\/strong\u003e at \u003cstrong\u003e4.8 kHz\u003c\/strong\u003e and provides \u003cstrong\u003e300 conversions per second\u003c\/strong\u003e; the usable sensitivity is \u003cstrong\u003e±7 mV\/V\u003c\/strong\u003e, the measuring range \u003cstrong\u003e±39 mV\u003c\/strong\u003e, and the linearity \u003cstrong\u003e\u0026lt; 0.01% FS\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eFeatures include \u003cstrong\u003e5 relay outputs\u003c\/strong\u003e, \u003cstrong\u003e3 opto-isolated PNP inputs\u003c\/strong\u003e, as well as \u003cstrong\u003eRS485 and RS232\u003c\/strong\u003e with \u003cstrong\u003eModbus RTU\u003c\/strong\u003e, ASCII or continuous transmission. A \u003cstrong\u003eWiFi module with 2.4 GHz\u003c\/strong\u003e and integrated web server, an analog output, and fieldbus and Ethernet modules are available on request. The standard housing measures \u003cstrong\u003e226 x 122 x 164 mm\u003c\/strong\u003e with a panel cutout of \u003cstrong\u003e186 x 96 mm\u003c\/strong\u003e and is protected according to \u003cstrong\u003eIP67\u003c\/strong\u003e; a version is approved for \u003cstrong\u003eATEX Zone 2-22\u003c\/strong\u003e. Power is supplied with \u003cstrong\u003e12 to 24 V DC\u003c\/strong\u003e at \u003cstrong\u003e6 W\u003c\/strong\u003e, the operating temperature range extends from \u003cstrong\u003e-20 °C to +60 °C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eWeighing indicator in ABS housing, protection class IP67 in the standard version\u003c\/li\u003e\n\n\u003cli\u003e6-digit backlit LCD display, 20 mm digit height\u003c\/li\u003e\n\n\u003cli\u003e46 status symbols and 6-button membrane keypad\u003c\/li\u003e\n\n\u003cli\u003eMounting on the table, wall, column, or in the front panel\u003c\/li\u003e\n\n\u003cli\u003eUp to 8 load cells with 350 Ω\u003c\/li\u003e\n\n\u003cli\u003eA\/D converter 24 bit, 16,000,000 points, 300 conversions per second\u003c\/li\u003e\n\n\u003cli\u003e99 dosing recipes with automatic fall calculation and tolerance control\u003c\/li\u003e\n\n\u003cli\u003eRS485 and RS232 with Modbus RTU, WiFi module on request\u003c\/li\u003e\n\n\u003cli\u003eVersion available for ATEX Zone 2-22\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":56812564709702,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EILE_WDESK-L_titelbild.png?v=1788183073"},{"product_id":"eilf-waegeindikator-mit-led-anzeige-6-stellig-ip67","title":"EILF weighing indicator with LED display, 6 digits, IP67","description":"\u003cp\u003eThe \u003cstrong\u003eEILF\u003c\/strong\u003e is an ABS weighing indicator, type \u003cstrong\u003eWDESK-R\u003c\/strong\u003e; the R version differs from the L version by its \u003cstrong\u003e6-digit semi-alphanumeric red LED display\u003c\/strong\u003e with \u003cstrong\u003e16 indicator LEDs\u003c\/strong\u003e instead of the backlit LCD display with 46 message icons.\u003c\/p\u003e\n\u003cp\u003eIt is designed for weighing and dosing tasks directly at the scale and can be installed on the wall, on a table, on a column, or in a panel front.\u003c\/p\u003e\n\u003cp\u003eThe digit height is \u003cstrong\u003e20 mm\u003c\/strong\u003e, operated via a \u003cstrong\u003e6-button keyboard\u003c\/strong\u003e; a clock\/calendar with buffer battery is built-in. The weighing input accepts up to \u003cstrong\u003e8 load cells with 350 Ω\u003c\/strong\u003e in 4- or 6-wire technology. The A\/D converter operates with \u003cstrong\u003e24 bits\u003c\/strong\u003e and \u003cstrong\u003e16,000,000 digits\u003c\/strong\u003e at \u003cstrong\u003e4.8 kHz\u003c\/strong\u003e and provides \u003cstrong\u003e300 conversions per second\u003c\/strong\u003e; the measuring range is \u003cstrong\u003e±39 mV\u003c\/strong\u003e, the usable sensitivity \u003cstrong\u003e±7 mV\/V\u003c\/strong\u003e, the linearity \u003cstrong\u003e\u0026lt; 0.01% full scale\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThere are \u003cstrong\u003e5 relay outputs\u003c\/strong\u003e, \u003cstrong\u003e3 opto-isolated digital PNP inputs\u003c\/strong\u003e as well as \u003cstrong\u003eRS485 and RS232\u003c\/strong\u003e with \u003cstrong\u003eModBus RTU\u003c\/strong\u003e, ASCII or continuous transmission. A \u003cstrong\u003e2.4 GHz WiFi module\u003c\/strong\u003e, an opto-isolated 16-bit analog output, as well as fieldbus and Ethernet modules are available on request. The standard version measures \u003cstrong\u003e226 x 122 x 164 mm\u003c\/strong\u003e with a panel cutout of \u003cstrong\u003e186 x 96 mm\u003c\/strong\u003e and is protected to \u003cstrong\u003eIP67\u003c\/strong\u003e; a version for \u003cstrong\u003eATEX II 3GD (Zone 2-22)\u003c\/strong\u003e is available. Power is supplied with \u003cstrong\u003e12 to 24 V DC\u003c\/strong\u003e at \u003cstrong\u003e6 W\u003c\/strong\u003e, the operating temperature ranges from \u003cstrong\u003e-20 °C to +60 °C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eABS weighing indicator, IP67 protection in the standard version\u003c\/li\u003e\n\n\u003cli\u003e6-digit red LED display, 20 mm digit height, 16 indicator LEDs\u003c\/li\u003e\n\n\u003cli\u003eWall, table, column, or panel front mounting\u003c\/li\u003e\n\n\u003cli\u003eUp to 8 load cells with 350 Ω in 4- or 6-wire technology\u003c\/li\u003e\n\n\u003cli\u003eA\/D converter 24 bit, 16,000,000 digits, 300 conversions per second\u003c\/li\u003e\n\n\u003cli\u003eUp to 99 adjustable formulas with automatic fall calculation\u003c\/li\u003e\n\n\u003cli\u003eRS485 and RS232 with ModBus RTU, WiFi module on request\u003c\/li\u003e\n\n\u003cli\u003eVersion for ATEX II 3GD (Zone 2-22) available\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":56812564742470,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EILF_L-WDESK-R_titelbild.png?v=1788184595"},{"product_id":"eilg-waegeindikator-edelstahl-aisi-304-lcd-anzeige-ip68","title":"EILG weighing indicator, AISI 304 stainless steel, LCD display, IP68","description":"\u003cp\u003eThe \u003cstrong\u003eEILG\u003c\/strong\u003e is an \u003cstrong\u003eAISI 304\u003c\/strong\u003e stainless steel weighing indicator, \u003cstrong\u003eWINOX-L\u003c\/strong\u003e type; the L version differs from the R version in its \u003cstrong\u003e6-digit semi-alphanumeric backlit LCD display\u003c\/strong\u003e with \u003cstrong\u003e46 message icons\u003c\/strong\u003e instead of the red LED display with 16 indicator LEDs.\u003c\/p\u003e\n\u003cp\u003eIt is designed for weighing and dosing tasks in environments where the housing is regularly cleaned; it can be installed on a wall, table, column or control panel front, and a bracket is included.\u003c\/p\u003e\n\u003cp\u003eThe digit height is \u003cstrong\u003e20 mm\u003c\/strong\u003e, operated via a \u003cstrong\u003e6-button keyboard\u003c\/strong\u003e; the housing is protected to \u003cstrong\u003eIP68\u003c\/strong\u003e, with \u003cstrong\u003eIP69K\u003c\/strong\u003e rating upon request according to \u003cstrong\u003eDIN 40050-9\u003c\/strong\u003e for high-pressure and steam jet cleaning (\u003cstrong\u003e100 bar\u003c\/strong\u003e, \u003cstrong\u003e80 °C\u003c\/strong\u003e, \u003cstrong\u003e250 seconds\u003c\/strong\u003e). Dimensions are \u003cstrong\u003e286 x 206 x 108 mm\u003c\/strong\u003e, with bracket \u003cstrong\u003e290 x 206 x 187 mm\u003c\/strong\u003e, panel cutout \u003cstrong\u003e248 x 160 mm\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe weighing input accepts up to \u003cstrong\u003e8 load cells with 350 Ω\u003c\/strong\u003e. The A\/D converter operates with \u003cstrong\u003e24 bits\u003c\/strong\u003e and \u003cstrong\u003e16,000,000 digits\u003c\/strong\u003e at \u003cstrong\u003e4.8 kHz\u003c\/strong\u003e, delivering \u003cstrong\u003e300 conversions per second\u003c\/strong\u003e; the measuring range is \u003cstrong\u003e±39 mV\u003c\/strong\u003e, usable sensitivity \u003cstrong\u003e±7 mV\/V\u003c\/strong\u003e, linearity \u003cstrong\u003e\u0026lt; 0.01% full scale\u003c\/strong\u003e. There are \u003cstrong\u003e5 relay outputs\u003c\/strong\u003e, \u003cstrong\u003e3 opto-isolated digital PNP inputs\u003c\/strong\u003e as well as \u003cstrong\u003eRS485 and RS232\u003c\/strong\u003e with \u003cstrong\u003eModBus RTU\u003c\/strong\u003e, ASCII or continuous transmission; a \u003cstrong\u003e2.4 GHz WiFi module\u003c\/strong\u003e, an analog output, and fieldbus and Ethernet modules are available upon request. Power supply is \u003cstrong\u003e12 to 24 V DC\u003c\/strong\u003e at \u003cstrong\u003e6 W\u003c\/strong\u003e, operating temperature range is \u003cstrong\u003e-20 °C to +60 °C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eAISI 304 stainless steel weighing indicator, IP68 protection, IP69K on request\u003c\/li\u003e\n\n\u003cli\u003e6-digit LCD display, 20 mm digit height, 46 message icons\u003c\/li\u003e\n\n\u003cli\u003eInstallation on wall, table, column or control panel front\u003c\/li\u003e\n\n\u003cli\u003eUp to 8 load cells with 350 Ω\u003c\/li\u003e\n\n\u003cli\u003eA\/D converter 24 bit, 16,000,000 digits, 300 conversions\/s\u003c\/li\u003e\n\n\u003cli\u003eUp to 99 adjustable formulas with automatic drop calculation\u003c\/li\u003e\n\n\u003cli\u003eRS485 and RS232 with ModBus RTU, WiFi module on request\u003c\/li\u003e\n\n\u003cli\u003eVersions for ATEX II 3GD and IECEx (Zone 2-22)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":56812564775238,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EILG_L-WINOX-L_titelbild.png?v=1788184595"},{"product_id":"eilh-waegeindikator-edelstahl-aisi-304-led-anzeige-ip68","title":"EILH weighing indicator, AISI 304 stainless steel, LED display, IP68","description":"\u003cp\u003eThe \u003cstrong\u003eEILH\u003c\/strong\u003e is a weighing indicator in a stainless steel housing made of \u003cstrong\u003eAISI 304\u003c\/strong\u003e, type \u003cstrong\u003eWINOX-R\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt is designed for weighing and dosing tasks in environments where the housing is cleaned regularly and can be mounted on the wall, on a table, on a column, or in the front panel.\u003c\/p\u003e\n\u003cp\u003eThe housing is protected all around to \u003cstrong\u003eIP68\u003c\/strong\u003e, with \u003cstrong\u003eIP69K\u003c\/strong\u003e certification according to DIN 40050-9 for high-pressure and steam jet cleaning available on request. The 6-digit red LED display has a digit height of \u003cstrong\u003e20 mm\u003c\/strong\u003e, plus \u003cstrong\u003e16 status LEDs\u003c\/strong\u003e and a \u003cstrong\u003e6-button membrane keypad\u003c\/strong\u003e. The dimensions are \u003cstrong\u003e286 x 206 x 108 mm\u003c\/strong\u003e, with bracket \u003cstrong\u003e290 x 206 x 187 mm\u003c\/strong\u003e, and the panel cutout is \u003cstrong\u003e248 x 160 mm\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe weighing input accommodates up to \u003cstrong\u003e8 load cells with 350 Ω\u003c\/strong\u003e in 4- or 6-wire technology. The A\/D converter operates with \u003cstrong\u003e24 bits\u003c\/strong\u003e and \u003cstrong\u003e16,000,000 points\u003c\/strong\u003e at \u003cstrong\u003e4.8 kHz\u003c\/strong\u003e and delivers \u003cstrong\u003e300 conversions per second\u003c\/strong\u003e; the usable sensitivity is \u003cstrong\u003e±7 mV\/V\u003c\/strong\u003e, the measuring range is \u003cstrong\u003e±39 mV\u003c\/strong\u003e, and the linearity is \u003cstrong\u003e\u0026lt; 0.01 % FS\u003c\/strong\u003e. There are \u003cstrong\u003e5 relay outputs\u003c\/strong\u003e, \u003cstrong\u003e3 opto-isolated PNP inputs\u003c\/strong\u003e, as well as \u003cstrong\u003eRS485 and RS232\u003c\/strong\u003e with \u003cstrong\u003eModbus RTU\u003c\/strong\u003e, ASCII or continuous transmission; WiFi module, analog output, fieldbus and Ethernet modules are available on request. Power supply is \u003cstrong\u003e12 to 24 V DC\u003c\/strong\u003e at \u003cstrong\u003e6 W\u003c\/strong\u003e, the operating temperature range is from \u003cstrong\u003e-20 °C to +60 °C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eWeighing indicator in stainless steel housing made of AISI 304\u003c\/li\u003e\n\n\u003cli\u003eProtection class IP68, IP69K according to DIN 40050-9 on request\u003c\/li\u003e\n\n\u003cli\u003e6-digit red LED display, 20 mm digit height, 16 status LEDs\u003c\/li\u003e\n\n\u003cli\u003eWall, table, column or front panel mounting, bracket included\u003c\/li\u003e\n\n\u003cli\u003eUp to 8 load cells with 350 Ω\u003c\/li\u003e\n\n\u003cli\u003eA\/D converter 24 bit, 16,000,000 points, 300 conversions per second\u003c\/li\u003e\n\n\u003cli\u003e99 dosing recipes with automatic drop calculation and tolerance control\u003c\/li\u003e\n\n\u003cli\u003eRS485 and RS232 with Modbus RTU, WiFi module on request\u003c\/li\u003e\n\n\u003cli\u003eVersion for ATEX and IECEx Zone 2-22 available\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":56812564808006,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EILH_WINOX-R_titelbild.png?v=1788183073"},{"product_id":"emlc-dms-messverstaerker","title":"EMLC strain gauge amplifier","description":"\u003cp\u003eThe \u003cstrong\u003eEMLC\u003c\/strong\u003e is a \u003cstrong\u003estrain gauge amplifier\u003c\/strong\u003e: It converts an analog load cell with \u003cstrong\u003emV\/V output\u003c\/strong\u003e into a digital one and can also be used on existing load cells to digitize an existing weighing system.\u003c\/p\u003e\n\u003cp\u003eIt is designed for IoT applications and is mounted either wired or directly to the load cell housing via a \u003cstrong\u003e¼-GAS connection\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eAISI 304 stainless steel\u003c\/strong\u003e housing is \u003cstrong\u003eIP67\u003c\/strong\u003e protected; \u003cstrong\u003e3 flying IP67 M12 connectors\u003c\/strong\u003e are included in the scope of delivery. Up to \u003cstrong\u003e4 load cells with 350 Ω\u003c\/strong\u003e can be operated in parallel using a junction box in 4- or 6-wire technology. The A\/D converter operates at \u003cstrong\u003e24 bits\u003c\/strong\u003e and \u003cstrong\u003e16,000,000 digits\u003c\/strong\u003e at \u003cstrong\u003e4.8 kHz\u003c\/strong\u003e and provides \u003cstrong\u003e300 conversions per second\u003c\/strong\u003e; the measuring range is \u003cstrong\u003e±26 mV\u003c\/strong\u003e, the usable sensitivity is \u003cstrong\u003e±7 mV\/V\u003c\/strong\u003e, and the linearity is \u003cstrong\u003e\u0026lt; 0.01% full scale\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThere are \u003cstrong\u003e3 relay outputs\u003c\/strong\u003e, \u003cstrong\u003e2 digital inputs\u003c\/strong\u003e, and a \u003cstrong\u003emicro-USB port\u003c\/strong\u003e (type B, USB 2.0 full-speed) for configuration via PC software. Options include \u003cstrong\u003eRS485\u003c\/strong\u003e, RS485 with analog output, IO-Link, CANopen, CC-Link, CC-Link IE, Profibus DP, Modbus\/TCP, Ethernet TCP\/IP, Ethernet\/IP, Profinet IO, EtherCAT, POWERLINK, and SERCOS III. Power supply is \u003cstrong\u003e12 to 24 V DC\u003c\/strong\u003e at \u003cstrong\u003e5 W\u003c\/strong\u003e, and the operating temperature ranges from \u003cstrong\u003e-20 °C to +50 °C\u003c\/strong\u003e. A \u003cstrong\u003eCE-M\u003c\/strong\u003e version according to \u003cstrong\u003e2014\/31\/EU\u003c\/strong\u003e, \u003cstrong\u003eEN 45501:2015\u003c\/strong\u003e, and \u003cstrong\u003eOIML R76:2006\u003c\/strong\u003e is available, with an alibi memory available upon request.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eDigitizes analog load cells with mV\/V output\u003c\/li\u003e\n\n\u003cli\u003eAISI 304 stainless steel housing, IP67 protection class\u003c\/li\u003e\n\n\u003cli\u003eWired mounting or via ¼-GAS connection on the load cell housing\u003c\/li\u003e\n\n\u003cli\u003eUp to 4 load cells with 350 Ω in 4- or 6-wire technology\u003c\/li\u003e\n\n\u003cli\u003e24-bit A\/D converter, 16,000,000 digits, 300 conversions per second\u003c\/li\u003e\n\n\u003cli\u003e3 relay outputs, 2 digital inputs, configuration via micro-USB\u003c\/li\u003e\n\n\u003cli\u003eRS485 and twelve other fieldbus and Ethernet interfaces available\u003c\/li\u003e\n\n\u003cli\u003eCE-M version according to 2014\/31\/EU, EN 45501:2015, and OIML R76:2006 available\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":56812564840774,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EMLC_LCB_titelbild.png?v=1788184596"},{"product_id":"etlb-intelligenter-anschlusskasten","title":"ETLB smart junction box","description":"\u003cp\u003eThe \u003cstrong\u003eETLB\u003c\/strong\u003e is an intelligent junction box with \u003cstrong\u003e8 independent channels\u003c\/strong\u003e for load cells, type \u003cstrong\u003eCLM8\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt is designed for weighing systems where each connected load cell is to be monitored individually, for example, in the direct control of a weighbridge.\u003c\/p\u003e\n\u003cp\u003eThe A\/D converter operates with \u003cstrong\u003e8 channels\u003c\/strong\u003e, \u003cstrong\u003e24 bits\u003c\/strong\u003e, and \u003cstrong\u003e16,000,000 digits\u003c\/strong\u003e at \u003cstrong\u003e4.8 kHz\u003c\/strong\u003e, providing \u003cstrong\u003e600 conversions per second\u003c\/strong\u003e. \u003cstrong\u003eUp to 16 load cells with 350 Ω\u003c\/strong\u003e can be connected in 4- or 6-wire technology; the measuring range is \u003cstrong\u003e±39 mV\u003c\/strong\u003e with a sensitivity of \u003cstrong\u003e±7 mV\/V\u003c\/strong\u003e. Linearity is \u003cstrong\u003e\u0026lt; 0.01% full scale\u003c\/strong\u003e, and thermal drift is \u003cstrong\u003e\u0026lt; 0.0005% full scale\/°C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe functional scope includes digital equalization of the 8 channels, load distribution analysis, and diagnosis for each load cell; an external inclinometer compensates for the inclination of the weighing system up to \u003cstrong\u003e±10 degrees\u003c\/strong\u003e. The device is operated via a backlit alphanumeric LCD with 2 lines of 8 characters (\u003cstrong\u003e5 mm\u003c\/strong\u003e digit height) and a 4-button keypad. Communication takes place via \u003cstrong\u003eRS485 and RS232\u003c\/strong\u003e with \u003cstrong\u003eModBus RTU\u003c\/strong\u003e, ASCII, or continuous transmission. Power supply is from \u003cstrong\u003e12 to 24 V DC\u003c\/strong\u003e at \u003cstrong\u003e5 W\u003c\/strong\u003e; the operating temperature range is from \u003cstrong\u003e-20 °C to +60 °C\u003c\/strong\u003e. Versions are available for Omega\/DIN rail, as a pure circuit board, and \u003cstrong\u003eIP67\u003c\/strong\u003e enclosures made of polycarbonate, ABS, or \u003cstrong\u003eAISI 304\u003c\/strong\u003e stainless steel. Certified according to \u003cstrong\u003eOIML R76:2006\u003c\/strong\u003e, Class III, with 3 x 10,000 verification intervals; UL-recognized component for USA and Canada.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e8 independent load cell channels with individual monitoring\u003c\/li\u003e\n\n\u003cli\u003eDigital equalization, load distribution analysis, and automatic diagnosis\u003c\/li\u003e\n\n\u003cli\u003e24-bit A\/D converter, 16,000,000 digits, 600 conversions per second\u003c\/li\u003e\n\n\u003cli\u003eUp to 16 load cells with 350 Ω\u003c\/li\u003e\n\n\u003cli\u003eRS485 and RS232 with ModBus RTU, Ethernet TCP\/IP on request\u003c\/li\u003e\n\n\u003cli\u003eInclination compensation up to ±10 degrees via inclinometer\u003c\/li\u003e\n\n\u003cli\u003eIP67 enclosure made of polycarbonate, ABS, or AISI 304 stainless steel\u003c\/li\u003e\n\n\u003cli\u003eOIML R76:2006, Class III, 3 x 10,000 verification intervals\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":56812564873542,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/ETLB_CLM8_titelbild.png?v=1788184596"},{"product_id":"etld-digitaler-transmitter-und-lastbegrenzer","title":"ETLD digital transmitter and load limiter","description":"\u003cp\u003eThe \u003cstrong\u003eETLD\u003c\/strong\u003e is a digital transmitter and load limiter for lifting systems, type \u003cstrong\u003eL-LCD3\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt detects load limitation by triggering alarm and pre-alarm thresholds and covers systems with up to 4 weighing points by combining several units.\u003c\/p\u003e\n\u003cp\u003eInstallation is on the rear panel of the control cabinet on Omega\/DIN rail or in a box; dimensions are \u003cstrong\u003e140 x 93 x 65 mm\u003c\/strong\u003e including the terminal block. Setup and calibration are done via a 4-button keypad and an LCD display with 2 lines of 16 characters (\u003cstrong\u003e5 mm\u003c\/strong\u003e digit height). LED indicators show the status of the relay outputs, and a faulty load cell connection is reported.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUp to 8 load cells with 350 Ω\u003c\/strong\u003e can be connected with a supply of \u003cstrong\u003e4 V DC\u003c\/strong\u003e. The A\/D converter operates at \u003cstrong\u003e24 bit\u003c\/strong\u003e and \u003cstrong\u003e3 conversions per second\u003c\/strong\u003e, the measuring range is \u003cstrong\u003e±3.9 mV\u003c\/strong\u003e, linearity is \u003cstrong\u003e\u0026lt; 0.01 % full scale\u003c\/strong\u003e, and thermal drift is \u003cstrong\u003e\u0026lt; 0.002 % full scale\/°C\u003c\/strong\u003e. Power supply is \u003cstrong\u003e24 to 48 V DC\/VAC\u003c\/strong\u003e at \u003cstrong\u003e6 VA\u003c\/strong\u003e, and the operating temperature range is \u003cstrong\u003e-10 °C to +50 °C\u003c\/strong\u003e. \u003cstrong\u003eRS485 and RS232\u003c\/strong\u003e with ASCII protocol, as well as 2 digital inputs, are available for communication. The \u003cstrong\u003eL-LCD3\u003c\/strong\u003e version has \u003cstrong\u003e3 relay outputs\u003c\/strong\u003e and one load cell input; an integrated RF interface for combining multiple units is available on request. The \u003cstrong\u003eL-LCD3PL\u003c\/strong\u003e variant offers \u003cstrong\u003e2 independent load cell inputs\u003c\/strong\u003e and \u003cstrong\u003e4 relay outputs\u003c\/strong\u003e with guided safety contact and meets Category 2 according to \u003cstrong\u003eEN 13849-1:2008, PL d\u003c\/strong\u003e (equivalent to SIL 2 according to EN 62061).\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eDigital transmitter and load limiter for lifting systems\u003c\/li\u003e\n\n\u003cli\u003eLoad limitation via alarm and pre-alarm thresholds\u003c\/li\u003e\n\n\u003cli\u003eSystems with up to 4 weighing points by combining multiple units\u003c\/li\u003e\n\n\u003cli\u003eUp to 8 load cells with 350 Ω, measuring range ±3.9 mV\u003c\/li\u003e\n\n\u003cli\u003eInstallation on Omega\/DIN rail, 140 x 93 x 65 mm\u003c\/li\u003e\n\n\u003cli\u003eRS485 and RS232 with ASCII protocol, RF interface on request\u003c\/li\u003e\n\n\u003cli\u003eL-LCD3PL variant with dual load cell input, Category 2 according to EN 13849-1:2008, PL d\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":56812564906310,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/ETLD_L-LCD3PL_titelbild.png?v=1788184595"},{"product_id":"etle-analoger-waegetransmitter-4-20-ma-oder-0-10-v-ip67-gehaeuse","title":"ETLE analog weight transmitter, 4–20 mA or 0–10 V, IP67 enclosure","description":"\u003cp\u003eThe \u003cstrong\u003eETLE\u003c\/strong\u003e is an analog weighing transmitter with a \u003cstrong\u003e4–20 mA or 0–10 V\u003c\/strong\u003e output.\u003c\/p\u003e\n\u003cp\u003eIt transmits the signal from tension and compression load cells as an analog signal to a controller and is compatible with standard analog\/digital PLC cards.\u003c\/p\u003e\n\u003cp\u003eThe transmitter has its own load cell input and, via a junction box, can accommodate \u003cstrong\u003eup to 4 load cells at 350 Ω\u003c\/strong\u003e in 4- or 6-wire technology; the load cell excitation is \u003cstrong\u003e5 V DC\/60 mA\u003c\/strong\u003e. The measuring range is \u003cstrong\u003e1 to 3 mV\/V\u003c\/strong\u003e, linearity is \u003cstrong\u003e0.01% full scale\u003c\/strong\u003e, and thermal drift is \u003cstrong\u003e0.005% full scale\/°C\u003c\/strong\u003e. The analog output provides \u003cstrong\u003e4 to 20 mA\u003c\/strong\u003e (max. 300 Ω) or \u003cstrong\u003e0 to 10 V DC\u003c\/strong\u003e (min. 10 kΩ).\u003c\/p\u003e\n\u003cp\u003eZero point and full scale are adjusted via 12-turn potentiometers, and sensitivity is set via 3 DIP switches; two additional DIP switches select between unidirectional (tension or compression) and bidirectional (tension and compression) operation. Calibration is performed using calibration weights or a load cell simulator. Power supply is \u003cstrong\u003e12 to 24 V DC\u003c\/strong\u003e at \u003cstrong\u003e2 W\u003c\/strong\u003e, the operating temperature range is from \u003cstrong\u003e-20 °C to +60 °C\u003c\/strong\u003e, and the storage temperature is from \u003cstrong\u003e-30 °C to +80 °C\u003c\/strong\u003e. The bare circuit board measures \u003cstrong\u003e45 x 26 x 11 mm\u003c\/strong\u003e, while the version in an \u003cstrong\u003eIP67\u003c\/strong\u003e ABS housing with two M12x1.5 cable glands measures \u003cstrong\u003e94 x 53 x 40 mm\u003c\/strong\u003e. A circular circuit board with \u003cstrong\u003eØ 20 mm\u003c\/strong\u003e and 8 mm height with solder terminals is available upon request.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eAnalog weighing transmitter for tension and compression load cells\u003c\/li\u003e\n\n\u003cli\u003eAnalog output 4 to 20 mA or 0 to 10 V DC\u003c\/li\u003e\n\n\u003cli\u003eUp to 4 load cells at 350 Ω via junction box\u003c\/li\u003e\n\n\u003cli\u003eMeasuring range 1 to 3 mV\/V, linearity 0.01% full scale\u003c\/li\u003e\n\n\u003cli\u003e45 x 26 x 11 mm circuit board for compact installation\u003c\/li\u003e\n\n\u003cli\u003eIP67 ABS housing with two M12x1.5 cable glands\u003c\/li\u003e\n\n\u003cli\u003eAdjustment via 12-turn potentiometers and DIP switches\u003c\/li\u003e\n\n\u003cli\u003eOptionally available as a circular circuit board with Ø 20 mm\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":56812564939078,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/ETLE_L-TLC_titelbild.png?v=1788184595"},{"product_id":"etlf-waegetransmitter-24-bit-rs485-mit-modbus-rtu","title":"ETLF weight transmitter, 24 bit, RS485 with ModBus RTU","description":"\u003cp\u003eThe \u003cstrong\u003eETLF\u003c\/strong\u003e is a weighing transmitter for mounting on the back panel of the control cabinet on an Omega\/DIN rail, type \u003cstrong\u003eTLS\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt provides the weight value analogously to a PLC or digitally via RS485 to a PC, controller, and remote display.\u003c\/p\u003e\n\u003cp\u003eThe device has \u003cstrong\u003e4 load cell inputs\u003c\/strong\u003e and processes \u003cstrong\u003eup to 8 load cells with 350 Ω\u003c\/strong\u003e via a junction box with a supply of \u003cstrong\u003e5 V DC\/120 mA\u003c\/strong\u003e. The A\/D converter operates with \u003cstrong\u003e24 bits\u003c\/strong\u003e and \u003cstrong\u003e16,000,000 digits\u003c\/strong\u003e and delivers \u003cstrong\u003e80 conversions per second\u003c\/strong\u003e. The measuring range is \u003cstrong\u003e±19.5 mV\u003c\/strong\u003e, the sensitivity of the load cells is \u003cstrong\u003e±3 mV\/V\u003c\/strong\u003e, linearity is \u003cstrong\u003e\u0026lt; 0.01% full scale\u003c\/strong\u003e, and thermal drift is \u003cstrong\u003e\u0026lt; 0.0005% full scale\/°C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe opto-isolated analog output operates with \u003cstrong\u003e16 bits\u003c\/strong\u003e and delivers \u003cstrong\u003e0 to 20 mA\u003c\/strong\u003e or \u003cstrong\u003e4 to 20 mA\u003c\/strong\u003e (up to 300 Ω) or \u003cstrong\u003e0 to 10 V\u003c\/strong\u003e (min. 10 kΩ). In addition, there are \u003cstrong\u003e2 opto-relay outputs\u003c\/strong\u003e, \u003cstrong\u003e2 opto-isolated digital PNP inputs\u003c\/strong\u003e, and \u003cstrong\u003eRS485\u003c\/strong\u003e with \u003cstrong\u003eModBus RTU\u003c\/strong\u003e, ASCII, or continuous transmission. The 6-digit semi-alphanumeric red LED display has a digit height of \u003cstrong\u003e8 mm\u003c\/strong\u003e; the instrument is configured with the free PC software Instrument Manager. The housing measures \u003cstrong\u003e123 x 92 x 50 mm\u003c\/strong\u003e, the power supply is \u003cstrong\u003e12 to 24 V DC\u003c\/strong\u003e at \u003cstrong\u003e5 W\u003c\/strong\u003e, and the operating temperature range is from \u003cstrong\u003e-20 °C to +60 °C\u003c\/strong\u003e. Upon request, an \u003cstrong\u003eIP67\u003c\/strong\u003e polycarbonate enclosure and an \u003cstrong\u003eATEX II 3GD\u003c\/strong\u003e version for Zone 2-22 are available; the device is a UL-recognized component for the USA and Canada.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eWeighing transmitter for Omega\/DIN rail, 123 x 92 x 50 mm\u003c\/li\u003e\n\n\u003cli\u003eUp to 8 load cells with 350 Ω via junction box\u003c\/li\u003e\n\n\u003cli\u003eA\/D converter 24 bits, 16,000,000 digits, 80 conversions per second\u003c\/li\u003e\n\n\u003cli\u003eOpto-isolated analog output with 16 bits in current or voltage\u003c\/li\u003e\n\n\u003cli\u003eRS485 with ModBus RTU, ASCII or continuous transmission\u003c\/li\u003e\n\n\u003cli\u003eIP67 enclosure and ATEX II 3GD version for Zone 2-22 upon request\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":56812564971846,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/ETLF_TLS_titelbild.png?v=1788184595"},{"product_id":"esma-dms-bruecken-messverstaerker-sil3","title":"ESMA strain gauge bridge amplifier, SIL3","description":"\u003cp\u003e\u003cstrong\u003eStrain gauge bridge amplifier SMM-DR\u003c\/strong\u003e for safety-related force and load measurement rated \u003cstrong\u003eSIL3\u003c\/strong\u003e and \u003cstrong\u003ePL e category 3\u003c\/strong\u003e. The amplifier puts \u003cstrong\u003eone\u003c\/strong\u003e bridge signal on \u003cstrong\u003etwo galvanically isolated current outputs\u003c\/strong\u003e, so that a safety controller can check the two channels against each other.\u003c\/p\u003e\n\u003cp\u003eThis is a safety component, not a measuring instrument: the redundancy comes from the two outputs, not from higher measuring accuracy. If the channels deviate by more than 10 %, the controller takes the plant to its safe state.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003etest pulse input\u003c\/strong\u003e allows the measuring chain to be checked during operation: a 24 VDC pulse raises the current of channel B by 1 mA. The matching safety controller is the SCU-DR from the same range.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures of the SMM-DR\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e✅Sensor input: \u003cstrong\u003e1 × strain gauge full bridge 350 Ω\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e✅Bridge sensitivity: up to \u003cstrong\u003e4 mV\/V\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e✅Bridge supply: 5 VDC\u003c\/p\u003e\n\u003cp\u003e✅Analog output: \u003cstrong\u003e2 × 4 … 20 mA\u003c\/strong\u003e, channel A and B, galvanically isolated\u003c\/p\u003e\n\u003cp\u003e✅Nominal range: 8 … 16 mA within 4 … 20 mA\u003c\/p\u003e\n\u003cp\u003e✅Load resistance: 500 Ω max.\u003c\/p\u003e\n\u003cp\u003e✅Test pulse input: 24 VDC ±20 %, ≤ 250 Hz\u003c\/p\u003e\n\u003cp\u003e✅Safety rating: \u003cstrong\u003eSIL3\u003c\/strong\u003e (EN 61508, EN 62061) · \u003cstrong\u003ePL e category 3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e✅Supply: 24 VDC ±10 %, 100 mA max.\u003c\/p\u003e\n\u003cp\u003e✅Housing: DR22.5 for TS 35 rail · 117.2 × 22.5 × 113.6 mm\u003c\/p\u003e\n\u003cp\u003e✅Protection: IP20\u003c\/p\u003e\n\u003cp\u003e✅Temperature coefficient: \u0026lt; 50 ppm\/K\u003c\/p\u003e\n\u003cp\u003e✅Order number: 0600-00492\u003c\/p\u003e","brand":"octogon Shop","offers":[{"title":"Default Title","offer_id":57265729929542,"sku":null,"price":860.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/ESMA_SMM-DR__product.png?v=1788560250"},{"product_id":"esmb-dms-bruecken-messverstaerker-sil3-ip65","title":"ESMB strain gauge bridge amplifier, SIL3, IP65","description":"\u003cp\u003e\u003cstrong\u003eStrain gauge bridge amplifier SMM-HD\u003c\/strong\u003e for safety-related force and load measurement rated \u003cstrong\u003eSIL3\u003c\/strong\u003e and \u003cstrong\u003ePL e category 3\u003c\/strong\u003e — in an \u003cstrong\u003eIP65 field housing\u003c\/strong\u003e for mounting outside the control cabinet.\u003c\/p\u003e\n\u003cp\u003eEach bridge signal goes to \u003cstrong\u003etwo galvanically isolated current outputs\u003c\/strong\u003e, so that a safety controller can check the channels against each other. The device is a safety component, not a measuring instrument: the redundancy comes from the two outputs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne or two amplifiers\u003c\/strong\u003e sit in the same housing — with two bridges, two measuring points are monitored safely and independently of each other. The matching safety controller is the SCU-DR from the same range.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures of the SMM-HD\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e✅Sensor input: \u003cstrong\u003e1 or 2 × strain gauge full bridge 350 Ω\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e✅Bridge sensitivity: up to \u003cstrong\u003e4 mV\/V\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e✅Bridge supply: 5 VDC\u003c\/p\u003e\n\u003cp\u003e✅Analog output: \u003cstrong\u003e2 × 4 … 20 mA per bridge\u003c\/strong\u003e, galvanically isolated\u003c\/p\u003e\n\u003cp\u003e✅Nominal range: 8 … 16 mA within 4 … 20 mA\u003c\/p\u003e\n\u003cp\u003e✅Load resistance: 500 Ω max.\u003c\/p\u003e\n\u003cp\u003e✅Test pulse input included\u003c\/p\u003e\n\u003cp\u003e✅Safety rating: \u003cstrong\u003eSIL3\u003c\/strong\u003e (EN 61508, EN 62061) · \u003cstrong\u003ePL e category 3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e✅Supply: 24 VDC ±10 %, 100 mA max.\u003c\/p\u003e\n\u003cp\u003e✅Housing: U-CASE 2 field housing\u003c\/p\u003e\n\u003cp\u003e✅Protection: \u003cstrong\u003eIP65\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e✅Order numbers: 0600-00493 (one bridge) · 0600-00494 (two bridges)\u003c\/p\u003e","brand":"octogon Shop","offers":[{"title":"A full bridge (0600-00493)","offer_id":57265731404102,"sku":null,"price":904.0,"currency_code":"EUR","in_stock":true},{"title":"Two full bridges (0600-00494)","offer_id":57265731535174,"sku":null,"price":1729.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/ESMB_SMM-HD__product.png?v=1788560313"},{"product_id":"esmc-dms-bruecken-messverstaerker-sil1-ip65","title":"ESMC strain gauge bridge amplifier, SIL1, IP65","description":"\u003cp\u003e\u003cstrong\u003eStrain gauge bridge amplifier SMM-HD-SIL1\u003c\/strong\u003e with a \u003cstrong\u003ebuilt-in safety circuit\u003c\/strong\u003e for \u003cstrong\u003eSIL1\u003c\/strong\u003e and \u003cstrong\u003ePL c\u003c\/strong\u003e — in an IP65 field housing for mounting outside the control cabinet.\u003c\/p\u003e\n\u003cp\u003eThe difference to the SIL3 range: the safety function sits \u003cstrong\u003einside the device\u003c\/strong\u003e. A second amplifier, two comparators and a semiconductor relay watch the bridge independently of the measuring channel. \u003cstrong\u003eNo safety controller is required\u003c\/strong\u003e — the device switches by itself.\u003c\/p\u003e\n\u003cp\u003eThat makes the SMM-HD-SIL1 a usable measuring amplifier at the same time: \u003cstrong\u003e0.1 % of range\u003c\/strong\u003e plus sensor error, 24 bit resolution, output either 4 … 20 mA or 0 … 10 V.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures of the SMM-HD-SIL1\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e✅Sensor input: \u003cstrong\u003e1 × strain gauge full bridge 350 Ω\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e✅Bridge sensitivity: up to \u003cstrong\u003e4 mV\/V\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e✅Bridge supply: 1.25 … 3 VDC\u003c\/p\u003e\n\u003cp\u003e✅Analog output: \u003cstrong\u003e4 … 20 mA or 0 … 10 V\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e✅Accuracy: \u003cstrong\u003e0.1 % of range\u003c\/strong\u003e plus sensor error\u003c\/p\u003e\n\u003cp\u003e✅Resolution: \u003cstrong\u003e24 bit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e✅Switching output: 30 VAC\/VDC, 500 mA max.\u003c\/p\u003e\n\u003cp\u003e✅Response time: 50 ms\u003c\/p\u003e\n\u003cp\u003e✅Safety rating: \u003cstrong\u003eSIL1 · PL c — built in\u003c\/strong\u003e, no safety controller required\u003c\/p\u003e\n\u003cp\u003e✅Housing: U-CASE 2 field housing\u003c\/p\u003e\n\u003cp\u003e✅Protection: \u003cstrong\u003eIP65\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e✅Order key: Q X X X X - X X\u003c\/p\u003e","brand":"octogon Shop","offers":[{"title":"Default Title","offer_id":57265732190534,"sku":null,"price":452.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/ESMC_SMM-HD-SIL1__product.png?v=1788560365"},{"product_id":"esme-dms-bruecken-messverstaerker-sil1-hutschiene","title":"ESME strain gauge bridge amplifier, SIL1, DIN rail","description":"\u003cp\u003e\u003cstrong\u003eStrain gauge bridge amplifier SMM-DR-SIL1\u003c\/strong\u003e with a \u003cstrong\u003ebuilt-in safety circuit\u003c\/strong\u003e for \u003cstrong\u003eSIL1\u003c\/strong\u003e and \u003cstrong\u003ePL c\u003c\/strong\u003e — in a DR22.5 DIN rail housing for the control cabinet.\u003c\/p\u003e\n\u003cp\u003eThe safety function sits \u003cstrong\u003einside the device\u003c\/strong\u003e: a second amplifier, two comparators and a semiconductor relay watch the bridge independently of the measuring channel. \u003cstrong\u003eNo safety controller is required\u003c\/strong\u003e — that is the difference to the SIL3 range, which does require one.\u003c\/p\u003e\n\u003cp\u003eA usable measuring amplifier at the same time: \u003cstrong\u003e0.1 % of range\u003c\/strong\u003e plus sensor error, 24 bit resolution, output either 4 … 20 mA or 0 … 10 V. The identical version in an IP65 field housing is the SMM-HD-SIL1.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures of the SMM-DR-SIL1\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e✅Sensor input: \u003cstrong\u003e1 × strain gauge full bridge 350 Ω\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e✅Bridge sensitivity: up to \u003cstrong\u003e4 mV\/V\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e✅Bridge supply: 1.25 … 3 VDC\u003c\/p\u003e\n\u003cp\u003e✅Analog output: \u003cstrong\u003e4 … 20 mA or 0 … 10 V\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e✅Accuracy: \u003cstrong\u003e0.1 % of range\u003c\/strong\u003e plus sensor error\u003c\/p\u003e\n\u003cp\u003e✅Resolution: \u003cstrong\u003e24 bit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e✅Switching output: 30 VAC\/VDC, 500 mA max.\u003c\/p\u003e\n\u003cp\u003e✅Response time: 50 ms\u003c\/p\u003e\n\u003cp\u003e✅Safety rating: \u003cstrong\u003eSIL1 · PL c — built in\u003c\/strong\u003e, no safety controller required\u003c\/p\u003e\n\u003cp\u003e✅Housing: DR22.5 for DIN rail\u003c\/p\u003e\n\u003cp\u003e✅Protection: IP20\u003c\/p\u003e\n\u003cp\u003e✅Order key: R A X X X - X X\u003c\/p\u003e","brand":"octogon Shop","offers":[{"title":"Default Title","offer_id":57265732485446,"sku":null,"price":430.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/ESME_SMM-DR-SIL1__product.png?v=1788560461"},{"product_id":"esmd-programmierbare-sicherheitssteuerung-sil3","title":"ESMD programmable safety controller, SIL3","description":"\u003cp\u003e\u003cstrong\u003eProgrammable safety controller SCU-DR\u003c\/strong\u003e for \u003cstrong\u003eSIL3\u003c\/strong\u003e (IEC 61508) and \u003cstrong\u003ePL e\u003c\/strong\u003e (EN ISO 13849-1). This is the controller that the SIL3 amplifiers of this range require: it compares the two redundant channels of an SMM-DR or SMM-HD and takes the plant to its safe state on deviation.\u003c\/p\u003e\n\u003cp\u003eA logic device, not a measuring device. Freely programmable with up to \u003cstrong\u003e800 STL instructions\u003c\/strong\u003e, function-plan oriented, with \u003cstrong\u003ecross-fault detection\u003c\/strong\u003e and external contact monitoring (EMU).\u003c\/p\u003e\n\u003cp\u003eThe controller connects to the plant control system over fieldbus — besides interface modules, \u003cstrong\u003ePROFISAFE\u003c\/strong\u003e and \u003cstrong\u003eFSoE\u003c\/strong\u003e are available up to PL e and SIL3 respectively.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures of the SCU-DR\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e✅Safe digital inputs: \u003cstrong\u003e14\u003c\/strong\u003e, of which 10 OSSD\u003c\/p\u003e\n\u003cp\u003e✅Safe analog inputs: \u003cstrong\u003e2\u003c\/strong\u003e (plus 4 standard inputs)\u003c\/p\u003e\n\u003cp\u003e✅Relay outputs: \u003cstrong\u003e6\u003c\/strong\u003e, of which 3 safe\u003c\/p\u003e\n\u003cp\u003e✅Standard outputs: 2\u003c\/p\u003e\n\u003cp\u003e✅Pulse outputs: 2 with cross-fault detection\u003c\/p\u003e\n\u003cp\u003e✅Expansion: 2 modules plus fieldbus\u003c\/p\u003e\n\u003cp\u003e✅Programming: up to \u003cstrong\u003e800 STL instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e✅PFH: \u003cstrong\u003e3.0 · 10⁻⁹\u003c\/strong\u003e at category 4\u003c\/p\u003e\n\u003cp\u003e✅Safety rating: \u003cstrong\u003eSIL3\u003c\/strong\u003e (IEC 61508) · \u003cstrong\u003ePL e\u003c\/strong\u003e (EN ISO 13849-1)\u003c\/p\u003e\n\u003cp\u003e✅Supply: 24 VDC, −10 \/ +15 % · power 2.4 W\u003c\/p\u003e\n\u003cp\u003e✅Housing: DIN rail · protection IP20\u003c\/p\u003e\n\u003cp\u003e✅Versions: standard · \/F with FSoE (EtherCAT) · \/P with PROFISAFE (PROFINET)\u003c\/p\u003e\n\u003cp\u003e✅Order key: C R X X X X X X - X X X\u003c\/p\u003e","brand":"octogon Shop","offers":[{"title":"SCU-DR Standard","offer_id":57265734353222,"sku":null,"price":1234.0,"currency_code":"EUR","in_stock":true},{"title":"SCU-DR\/F with FSoE (EtherCAT)","offer_id":57265734418758,"sku":null,"price":2383.0,"currency_code":"EUR","in_stock":true},{"title":"SCU-DR\/P with PROFISAFE (PROFINET)","offer_id":57265734451526,"sku":null,"price":2383.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/ESMD_SCU-DR__product.png?v=1788560414"},{"product_id":"efmd-wireless-handanzeige","title":"EFMD wireless handheld display","description":"\u003cp\u003eThe \u003cstrong\u003eEFMD\u003c\/strong\u003e is Mantracourt's handheld display for T24 radio telemetry. It displays real-time measurements from T24 transmitter modules – load, force, pressure, torque, strain, or temperature – without the need for a cable to the sensor.\u003c\/p\u003e\n\u003cp\u003eWhen delivered, the device operates in \u003cstrong\u003eroaming mode\u003c\/strong\u003e: up to twelve nearby T24 transmitters are automatically detected and displayed. Alternatively, \u003cstrong\u003etwelve fixed inputs\u003c\/strong\u003e can be defined, each with its own designation, calibrated unit, and overload warning. Most settings are made via the device's menu, including the transfer of radio settings to the transmitters; the free T24 Handheld Toolkit handles full setup as well as saving and loading configurations. Menu items can be locked or hidden, and a PIN and password prevent accidental changes. The firmware can be updated via the toolkit.\u003c\/p\u003e\n\u003cp\u003eThe EFMD replaces the four predecessors T24-HS, T24-HR, T24-HLT, and T24-DWS, combining their most common features into one device. It is backward compatible with existing T24 products.\u003c\/p\u003e\n\u003cp\u003eThe radio link operates on the license-free \u003cstrong\u003e2.4 GHz band using DSSS technology\u003c\/strong\u003e with 10 mW transmission power, making it coexistent with WLAN, Bluetooth, and Zigbee. The range of \u003cstrong\u003eup to 800 m\u003c\/strong\u003e applies in open field at 3 m height above ground. Two standard AA alkaline cells power the device; continuous power supply is also possible for fixed installations.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eDisplay of up to 12 T24 transmitter modules, in roaming or as fixed inputs\u003c\/li\u003e\n\n\u003cli\u003eRobust housing with IP67 \/ NEMA 4 protection rating\u003c\/li\u003e\n\n\u003cli\u003eDimensions 93 × 170 × 40 mm\u003c\/li\u003e\n\n\u003cli\u003eOperating temperature −10 to +50 °C, storage −40 to +85 °C without batteries\u003c\/li\u003e\n\n\u003cli\u003e2 × AA alkaline cells, more than 30 hours continuous operation, approx. 1.5 years standby\u003c\/li\u003e\n\n\u003cli\u003e2.4 GHz DSSS, 10 mW, up to 800 m in open field\u003c\/li\u003e\n\n\u003cli\u003eConfiguration on the device or via the free T24 Handheld Toolkit\u003c\/li\u003e\n\n\u003cli\u003eFirmware updatable, menus lockable\u003c\/li\u003e\n\n\u003cli\u003eFCC, ETSI, and IC approvals\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eManufacturer accessories: 1 m angled USB cable (ACC-CB-A) and mounting kit with articulated arm (ACC-MT). The matching transmitter modules can be found under \u003ca href=\"\/en\/collections\/funk-messtechnik\"\u003eWireless Measurement Technology\u003c\/a\u003e, such as the \u003ca href=\"\/en\/products\/wireless-funk-transmitter-t24\"\u003eEFMC Wireless Radio Transmitter T24\u003c\/a\u003e.\u003c\/p\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57266203066694,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EFMD_T24-HK-S__titelbild.png?v=1788559432"},{"product_id":"efme-funk-basisstation-als-usb-stick","title":"EFME wireless base station as USB stick","description":"\u003cp\u003eThe \u003cstrong\u003eEFME\u003c\/strong\u003e is the smallest \u003cstrong\u003eradio base station\u003c\/strong\u003e in the T24 series: a USB stick that establishes a wireless connection to the T24 transmitter modules. No cables, no external power supply — it is powered via the USB port. This allows radio telemetry to be set up, calibrated, and monitored from any Windows computer or tablet.\u003c\/p\u003e\n\u003cp\u003eThe module \u003cstrong\u003esends and receives\u003c\/strong\u003e. This enables error detection and correction over the radio link, configuration and calibration of the T24 transmitters via radio, and their remote control from the computer. Despite its small size, the EFME can be used with all T24 transmitter modules.\u003c\/p\u003e\n\u003cp\u003eTwo points should be considered during planning: The free \u003cstrong\u003eT24 Toolkit must be installed before plugging it in for the first time\u003c\/strong\u003e, as it includes the necessary drivers. Also, \u003cstrong\u003eonly one T24-BSd\u003c\/strong\u003e can operate per computer — if multiple base stations are required on a single computer, the T24-BSi is the right choice. The base station monitors one radio channel; all modules must be set to the same channel. The bandwidth is sufficient for approximately 200 measured values per second per channel, with mixed sensor types being supported.\u003c\/p\u003e\n\u003cp\u003eThe radio link operates in the license-free \u003cstrong\u003e2.4 GHz band using DSSS technology\u003c\/strong\u003e with 10 mW transmission power. The \u003cstrong\u003erange of up to 500 m\u003c\/strong\u003e applies to line-of-sight in an open field at a height of 3 m. The EFME itself does not require calibration — it calibrates the other T24 devices.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSmallest T24 base station, powered exclusively via USB, no wiring\u003c\/li\u003e\n\n\u003cli\u003eBuilt-in antenna, line-of-sight range up to 500 m\u003c\/li\u003e\n\n\u003cli\u003eConfiguration, calibration, and monitoring of all T24 transmitter modules\u003c\/li\u003e\n\n\u003cli\u003eSupply 4.875 to 5.125 V DC per USB 2.0, current consumption under 100 mA\u003c\/li\u003e\n\n\u003cli\u003eIP50 protection class, dimensions 58 × 20.5 × 11 mm\u003c\/li\u003e\n\n\u003cli\u003eOperating temperature -20 to +55 °C, storage -40 to +85 °C\u003c\/li\u003e\n\n\u003cli\u003e2.4 GHz DSSS, 10 mW, license-free\u003c\/li\u003e\n\n\u003cli\u003eDevice markings: CE, FCC ID VHARA24, IC 7224A-RA24\u003c\/li\u003e\n\n\u003cli\u003ePortable recording possible with the T24LOG100 software\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eYou can find the matching transmitter modules and displays under \u003ca href=\"\/en\/collections\/funk-messtechnik\"\u003eWireless Measurement Technology\u003c\/a\u003e, and the remaining evaluation electronics under \u003ca href=\"\/en\/collections\/messelektronik\"\u003eMeasurement Electronics\u003c\/a\u003e.\u003c\/p\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57266203132230,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EFME_T24-BSd__titelbild.png?v=1788559553"},{"product_id":"efmf-oem-sendemodul-fuer-dehnungsmessbruecken","title":"EFMF OEM transmitter module for strain gauge bridges","description":"\u003cp\u003eThe \u003cstrong\u003eEFMF\u003c\/strong\u003e is an OEM transmitter module for strain gauge bridges: load cells, torque transducers, strain gauges, pressure measurement modules and other four-wire bridges. The board measures only \u003cstrong\u003e37.5 × 16.8 × 6.6 mm\u003c\/strong\u003e and thus fits into the sensor housing — turning a conventional load cell into a wireless load cell.\u003c\/p\u003e\n\u003cp\u003eThe input directly accepts the mV\/V signal and provides \u003cstrong\u003e5 V bridge excitation for up to four load cells\u003c\/strong\u003e. The measurement electronics operate with 24-bit internal resolution, 4 ppm\/°C zero drift and 5 ppm\/°C gain drift, and are \u003cstrong\u003ecustomer-calibratable over up to nine points\u003c\/strong\u003e — with linearization and output in freely selectable units. Data is transmitted at up to 200 readings per second to all T24 receivers: handheld displays, large displays, analog outputs, base stations.\u003c\/p\u003e\n\u003cp\u003eTwo designs are available: \u003cstrong\u003eT24-SAi\u003c\/strong\u003e with an antenna integrated into the radio module and a range of up to 500 m, \u003cstrong\u003eT24-SAe\u003c\/strong\u003e with a UFL socket for an external antenna and up to 800 m. Three sensitivities can be ordered: ±3.1 mV\/V as the basic version, plus ±4.5 mV\/V and 20 mV\/V.\u003c\/p\u003e\n\u003cp\u003eThe low-power modes enable long battery life: the module can shut down between transmissions or — from a handheld display or base station — be completely switched off and woken up again. With a pair of AA cells and twelve measurement sessions of five minutes per day, approximately two years of operating time can be achieved, and about five years with D cells. The radio link operates on the license-free 2.4 GHz DSSS band with 10 mW and \u003cstrong\u003e128-bit AES encryption\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eMiniature board 37.5 × 16.8 × 6.6 mm for installation in the sensor\u003c\/li\u003e\n\n\u003cli\u003eBridge excitation 5 V DC, bridge resistance 85 to 5000 Ω, up to four 350-Ω bridges in parallel\u003c\/li\u003e\n\n\u003cli\u003eSensitivity ±3.1 mV\/V, optional ±4.5 mV\/V or 20 mV\/V\u003c\/li\u003e\n\n\u003cli\u003e24 bit internal, up to 200 updates per second, transmission interval 5 ms to 1 day\u003c\/li\u003e\n\n\u003cli\u003eCalibration over up to 9 points, stored in the module\u003c\/li\u003e\n\n\u003cli\u003eBidirectional measurement — tension and compression\u003c\/li\u003e\n\n\u003cli\u003eSupply 2.1 to 3.6 V DC, quiescent current typically 5 µA\u003c\/li\u003e\n\n\u003cli\u003eRange up to 500 m (SAi) or up to 800 m (SAe) in open field\u003c\/li\u003e\n\n\u003cli\u003e128-bit AES encryption, FCC, ETSI and IC approvals\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003ePlease note: The module is \u003cstrong\u003enot reverse polarity protected\u003c\/strong\u003e, the maximum voltage is 3.6 V, and the supply must be able to provide 300 mA for a short time at startup. The cable between the module and the measuring grid should remain under 3 m, because the voltage drop in the cable in four-wire measurement affects the factory calibration. The bare board has no protection class — for this, there are the housing versions T24-ACM-SA and T24-ACMi-SA with IP67, and T24-ACMm-SA with IP50.\u003c\/p\u003e\n\u003cp\u003eThe suitable receivers can be found under \u003ca href=\"\/en\/collections\/funk-messtechnik\"\u003eWireless Measurement Technology\u003c\/a\u003e, load cells for equipping under \u003ca href=\"\/en\/collections\/waegezellen-kraftaufnehmer\"\u003eLoad Cells \u0026amp; Force Transducers\u003c\/a\u003e.\u003c\/p\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57266203164998,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EFMF_T24-SA__titelbild.png?v=1788559607"},{"product_id":"efmg-funk-grossanzeige-4-ziffern-a-100-mm","title":"EFMG wireless large display, 4 digits of 100 mm","description":"\u003cp\u003eThe \u003cstrong\u003eEFMG\u003c\/strong\u003e is a \u003cstrong\u003ewireless large-format display\u003c\/strong\u003e with \u003cstrong\u003efour 100 mm high digits\u003c\/strong\u003e: it receives its measured value via radio. Only the 11 to 30 V DC power supply is connected—no signal cable is required. This allows a display to be mounted wherever it is needed without having to run a cable to the sensor.\u003c\/p\u003e\n\u003cp\u003eIt displays the value of \u003cstrong\u003ea single T24 transmitter or the sum of up to eight\u003c\/strong\u003e T24 transmitter modules. Which modules are included, which display format applies, and how the zero-point functions operate are configured using the free T24 Toolkit PC software via a USB base station. Four display formats are available, from −1999…9999 to −1.999…9.999. Input timeouts, underflow, and overflow are indicated on the display.\u003c\/p\u003e\n\u003cp\u003eTwo wired \u003cstrong\u003elogic inputs\u003c\/strong\u003e allow for remote control of tare and switching between net and gross. The display can be wall-mounted or suspended from the ceiling—typical for crane scales and weighing systems where the operator remains at a distance from the load.\u003c\/p\u003e\n\u003cp\u003eThe wireless link operates on the license-free \u003cstrong\u003e2.4 GHz band using DSSS technology\u003c\/strong\u003e with 10 mW transmission power and 15 channels. The display is equipped with the T24-ANTA antenna. The range depends on the remote unit: \u003cstrong\u003eup to 800 m\u003c\/strong\u003e with a module using T24-ANTA, T24-ANTD, or T24-ANTE, \u003cstrong\u003earound 600 m\u003c\/strong\u003e with a transmitter featuring an integrated chip antenna, and around 400 m with T24-ANTB or T24-ANTC—all in open-field conditions, with the transmitter on a 3 m mast and the receiver 1.5 m above ground.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eFour LED digits with 100 mm character height, readable from a long distance\u003c\/li\u003e\n\n\u003cli\u003eMeasured value received via radio—only the power supply needs to be wired\u003c\/li\u003e\n\n\u003cli\u003eIndividual value from a T24 transmitter or sum of up to eight modules\u003c\/li\u003e\n\n\u003cli\u003eTwo logic inputs for tare and net\/gross\u003c\/li\u003e\n\n\u003cli\u003e11 to 30 V DC power supply, maximum current 3.5 A, with reverse polarity protection\u003c\/li\u003e\n\n\u003cli\u003eIP65 \/ NEMA 4X protection rating when installed correctly\u003c\/li\u003e\n\n\u003cli\u003eHousing 434 × 195.5 mm, wall or ceiling mounting\u003c\/li\u003e\n\n\u003cli\u003eOperating temperature 0 to +50 °C, storage −20 to +70 °C\u003c\/li\u003e\n\n\u003cli\u003e2.4 GHz DSSS, 10 mW, 15 channels, RoHS compliant\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe power supply is not included in the scope of delivery. Suitable transmitter modules can be found under \u003ca href=\"\/en\/collections\/funk-messtechnik\"\u003eWireless Measurement Technology\u003c\/a\u003e, and further large-format displays under \u003ca href=\"\/en\/collections\/grossanzeigen\"\u003eLarge Displays \u0026amp; Remote Displays\u003c\/a\u003e.\u003c\/p\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57266203197766,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EFMG_T24-LD1__titelbild.png?v=1788559652"},{"product_id":"efmh-atex-funk-sendemodul-fuer-dehnungsmessbruecken","title":"EFMH ATEX wireless transmitter module for strain gauge bridges","description":"\u003cp\u003eThe \u003cstrong\u003eEFMH\u003c\/strong\u003e is an \u003cstrong\u003eATEX and IECEx-approved radio transmission module for strain gauge bridges\u003c\/strong\u003e. It measures the bridge signal from a load cell, force, pressure, or torque transducer and transmits it cyclically to X24 or T24 receivers – from the hazardous area, wirelessly.\u003c\/p\u003e\n\u003cp\u003eThe marking is \u003cstrong\u003eI M2 Ex ib I\u003c\/strong\u003e and \u003cstrong\u003eII 2G Ex ib IIC T4 Gb\u003c\/strong\u003e at \u003cstrong\u003eTa = −20 to +50 °C\u003c\/strong\u003e. This means the device is approved for \u003cstrong\u003eZone 1 and Zone 2\u003c\/strong\u003e. The electronics are housed in an IP67-rated enclosure with a battery holder. \u003cstrong\u003eOnly two Energizer L91 AA size lithium cells are permitted\u003c\/strong\u003e – this condition is stated in the approval, and cell replacement must not take place in an explosive atmosphere.\u003c\/p\u003e\n\u003cp\u003eThe input operates in a four-wire system with \u003cstrong\u003e5 V bridge excitation\u003c\/strong\u003e and accepts bridge resistances from 85 to 5000 Ω, up to four 350-Ω bridges in parallel. The measurement is bidirectional, thus detecting both tension and compression. Zero point drift a maximum of 4 ppm\/°C, gain drift a maximum of 5 ppm\/°C, non-linearity before linearization a maximum of 25 ppm of the measuring range. Calibration and linearization are performed in engineering units using the free Toolkit software.\u003c\/p\u003e\n\u003cp\u003eThe radio link operates on the license-free \u003cstrong\u003e2.4 GHz DSSS band\u003c\/strong\u003e with 10 mW and 15 channels; the transmit power is adjustable from 0 to 100 %. The \u003cstrong\u003erange of up to 800 m\u003c\/strong\u003e applies when both sides use a T24-ANTA antenna; against a receiver with an integrated antenna, it is around 600 m – measured in open field, transmitter on a 3-m mast, receiver 1.5 m above the ground. Battery life can be up to five years depending on the operating mode.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eATEX and IECEx: I M2 Ex ib I and II 2G Ex ib IIC T4 Gb, Ta −20 to +50 °C\u003c\/li\u003e\n\n\u003cli\u003eApproved for Zone 1 and Zone 2\u003c\/li\u003e\n\n\u003cli\u003eIntrinsically safe electronics in IP67 housing, 76.6 × 59 × 31 mm plus 25 mm gland\u003c\/li\u003e\n\n\u003cli\u003eBridge excitation 5 V DC, 85 to 5000 Ω, four-wire system\u003c\/li\u003e\n\n\u003cli\u003eSensitivity ±3.1 mV\/V, version with 20 mV\/V available\u003c\/li\u003e\n\n\u003cli\u003eZero point drift max. 4 ppm\/°C, gain drift max. 5 ppm\/°C\u003c\/li\u003e\n\n\u003cli\u003ePower supply 2.1 to 3.6 V DC from two Energizer L91 AA cells\u003c\/li\u003e\n\n\u003cli\u003eBattery life up to 5 years depending on transmission interval\u003c\/li\u003e\n\n\u003cli\u003e2.4 GHz DSSS, 10 mW, up to 800 m in open field\u003c\/li\u003e\n\n\u003cli\u003eWorks with X24 and T24 receivers\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant for system planning:\u003c\/strong\u003e X24 devices belong in the hazardous area, T24 devices in the safe area – \u003cstrong\u003eT24 modules must not be used in the Ex Zone\u003c\/strong\u003e. The \u003ca href=\"\/en\/products\/efmi-x24-hd\"\u003eEFMI ATEX Wireless Handheld Display X24-HD\u003c\/a\u003e serves as the receiver in the zone; all T24 receivers can be used in the safe area. The housing maintains IP67 only with cable diameters of 3.0 to 6.5 mm in the cable gland. Further Ex devices can be found under \u003ca href=\"\/en\/pages\/explosionsschutz-atex-iecex\"\u003eExplosion Protection ATEX \u0026amp; IECEx\u003c\/a\u003e.\u003c\/p\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57266203263302,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EFMH_X24-ACMi-SA__titelbild.png?v=1788559697"},{"product_id":"efmi-atex-wireless-handanzeige","title":"EFMI ATEX wireless handheld display","description":"\u003cp\u003eThe \u003cstrong\u003eEFMI\u003c\/strong\u003e is the \u003cstrong\u003eATEX and IECEx approved handheld display\u003c\/strong\u003e of the X24 series — the only receiver that can be operated even in hazardous areas. It displays measurement values from X24 and T24 transmitter modules wirelessly, without cables to the sensor.\u003c\/p\u003e\n\u003cp\u003eThe marking is \u003cstrong\u003eI M2 Ex ib I\u003c\/strong\u003e and \u003cstrong\u003eII 2G Ex ib IIC T4 Gb\u003c\/strong\u003e at \u003cstrong\u003eTa = −20 to +50 °C\u003c\/strong\u003e. The device is powered by \u003cstrong\u003etwo Energizer L91 lithium cells in AA size\u003c\/strong\u003e — other cells are not permitted, and cell replacement must not be carried out in an explosive atmosphere. The cells themselves are Ex-certified.\u003c\/p\u003e\n\u003cp\u003eThe display can show any detected transmitter or \u003cstrong\u003eup to 24 pre-stored transmitter modules\u003c\/strong\u003e, which the operator can scroll through. Up to \u003cstrong\u003eeight group totals\u003c\/strong\u003e can be formed. Each group and each individual module gets its own designation, scaling, display format, zero function, and overload threshold. Six membrane keys on the front panel are used for operation; labeling strips can be inserted behind the transparent windows.\u003c\/p\u003e\n\u003cp\u003eThe radio link operates on the license-free \u003cstrong\u003e2.4 GHz band using DSSS technology\u003c\/strong\u003e with 10 mW and 15 channels. The antenna is built into the housing, so special mounting regulations are not required. With the permitted L91 cells, the manufacturer specifies \u003cstrong\u003e54 hours of continuous operation\u003c\/strong\u003e and more than five years of standby time when switched off.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eATEX and IECEx: I M2 Ex ib I and II 2G Ex ib IIC T4 Gb, Ta −20 to +50 °C\u003c\/li\u003e\n\n\u003cli\u003eOnly receiver of the X24 series for operation in hazardous areas\u003c\/li\u003e\n\n\u003cli\u003eWorks with X24 and T24 transmitter modules\u003c\/li\u003e\n\n\u003cli\u003eUp to 24 stored transmitters, up to 8 group totals\u003c\/li\u003e\n\n\u003cli\u003eABS housing, 152 × 90 × 34 mm, protection class IP67\u003c\/li\u003e\n\n\u003cli\u003eOperating temperature −10 to +50 °C, storage −40 to +85 °C\u003c\/li\u003e\n\n\u003cli\u003ePower supply 2.3 to 3.6 V DC from two Energizer L91 AA cells\u003c\/li\u003e\n\n\u003cli\u003e54 hours continuous operation, over 5 years standby\u003c\/li\u003e\n\n\u003cli\u003e2.4 GHz DSSS, 10 mW, 15 channels, antenna in housing\u003c\/li\u003e\n\n\u003cli\u003eSix membrane keys, labeling windows\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe housing has no mounting option — it is designed as a handheld device. The suitable transmitter module for the zone is the \u003ca href=\"\/en\/products\/efmh-x24-acmi-sa\"\u003eEFMH ATEX Wireless Strain Gauge Transmitter X24-ACMi-SA\u003c\/a\u003e. Further Ex devices can be found under \u003ca href=\"\/en\/pages\/explosionsschutz-atex-iecex\"\u003eExplosion Protection ATEX \u0026amp; IECEx\u003c\/a\u003e, and other radio technology under \u003ca href=\"\/en\/collections\/funk-messtechnik\"\u003eWireless Measurement Technology\u003c\/a\u003e.\u003c\/p\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57266203296070,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EFMI_X24-HD__titelbild.png?v=1788559746"},{"product_id":"eola-analoger-waegetransmitter-als-oem-platine-45-x-26-x-11-mm","title":"EOLA analog weight transmitter, OEM board 45 × 26 × 11 mm","description":"\u003cp\u003eThe \u003cstrong\u003eEOLA\u003c\/strong\u003e is an analog weighing transmitter in the form of an OEM board, type \u003cstrong\u003eTLC\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt is designed for installation in your own device: it converts the mV\/V signal from a strain gauge bridge into a standardized analog signal for control purposes. Since the housing, display, and controls are already present in the target device, the board offers the most compact solution for series-produced devices.\u003c\/p\u003e\n\u003cp\u003eThe board measures \u003cstrong\u003e45 × 26 × 11 mm\u003c\/strong\u003e and has a mounting hole of \u003cstrong\u003eØ 4 mm\u003c\/strong\u003e. The sensor input accepts \u003cstrong\u003e1 … 3 mV\/V\u003c\/strong\u003e, connecting up to \u003cstrong\u003efour 350 Ω load cells\u003c\/strong\u003e in parallel via a junction box, in a 4- or 6-wire configuration. The bridge excitation provides \u003cstrong\u003e5 VDC \/ 60 mA\u003c\/strong\u003e. Outputs available are \u003cstrong\u003e4 … 20 mA\u003c\/strong\u003e (load max. 300 Ω) or \u003cstrong\u003e0 … 10 VDC\u003c\/strong\u003e (load min. 10 kΩ). Linearity is \u003cstrong\u003e0.01% of full scale\u003c\/strong\u003e, and thermal drift is \u003cstrong\u003e0.005% of full scale per °C\u003c\/strong\u003e. The board is powered by \u003cstrong\u003e12 … 24 VDC ±10%\u003c\/strong\u003e at \u003cstrong\u003e2 W\u003c\/strong\u003e; operating temperature ranges from \u003cstrong\u003e-20 °C to +60 °C\u003c\/strong\u003e, and storage temperature from -30 °C to +80 °C.\u003c\/p\u003e\n\u003cp\u003eThe board is a \u003cstrong\u003eUL Recognized Component\u003c\/strong\u003e – a component recognized for installation in other products, not an approved end device. The conditions for recognition are: indoor use only, wall mounting at a maximum height of 2 m, and a PS2 type power supply. A CE mark is not documented in the manufacturer's product sheet; a declaration of conformity must be requested before placing the product on the market in the EU.\u003c\/p\u003e\n\u003cp\u003eThe bare board has no ingress protection rating and must be installed in a housing. With the IP67 enclosure \u003cstrong\u003eCASTLC\u003c\/strong\u003e, it achieves IP67; it is available on request in ABS and polycarbonate, although only the polycarbonate version is UL certified. A round version of the board with \u003cstrong\u003eØ 20 mm\u003c\/strong\u003e at 8 mm height, for a single load cell and with solder connections instead of plug-in terminals, is also available on request.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eAnalog weighing transmitter as an OEM board, only 45 × 26 × 11 mm\u003c\/li\u003e\n\n\u003cli\u003eInput 1 … 3 mV\/V, up to four 350 Ω load cells in parallel\u003c\/li\u003e\n\n\u003cli\u003eOutput 4 … 20 mA or 0 … 10 VDC\u003c\/li\u003e\n\n\u003cli\u003eLinearity 0.01% of full scale, thermal drift 0.005%\/°C\u003c\/li\u003e\n\n\u003cli\u003eBridge excitation 5 VDC \/ 60 mA, 4- or 6-wire connection\u003c\/li\u003e\n\n\u003cli\u003ePower supply 12 … 24 VDC ±10%, power consumption 2 W\u003c\/li\u003e\n\n\u003cli\u003eIP67 enclosure CASTLC on request\u003c\/li\u003e\n\n\u003cli\u003eRound version Ø 20 × 8 mm on request\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon Shop","offers":[{"title":"Default Title","offer_id":57306230128966,"sku":null,"price":110.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EOLA_TLC_titelbild_e6a6c895-0b49-465c-a503-cad144c5b357.webp?v=1788951905"},{"product_id":"eoma-universal-messumformer","title":"EOMA universal transmitter","description":"\u003cp\u003eThe \u003cstrong\u003eEOMA\u003c\/strong\u003e is a programmable universal transducer as an OEM board, type \u003cstrong\u003eMATU\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eOne board covers seven sensor types: It converts the signal from a temperature, force, or pressure sensor into a standardized analog signal for control. The sensor type and measuring range are programmed, meaning one item in stock replaces several specialized transducers.\u003c\/p\u003e\n\u003cp\u003eInputs include \u003cstrong\u003ePt100 and Pt1000\u003c\/strong\u003e in 4-, 3- or 2-wire circuits (sensor current 0.25 mA), \u003cstrong\u003ethermocouples of types J, K, and N\u003c\/strong\u003e, a \u003cstrong\u003estrain gauge full bridge\u003c\/strong\u003e from 350 Ω (bridge excitation 1.25 VDC for 2-wire, 3 VDC for 3-wire), \u003cstrong\u003ecurrent and voltage\u003c\/strong\u003e with 0 … 20 mA, 0 … 1 V and 0 … 10 V, and a \u003cstrong\u003epotentiometer\u003c\/strong\u003e from 350 Ω to 100 kΩ. Three digital inputs and outputs with 3.3 V \/ 2 mA are available as an option.\u003c\/p\u003e\n\u003cp\u003eOutputs are \u003cstrong\u003e4 … 20 mA\u003c\/strong\u003e in 2- or 3-wire circuits or \u003cstrong\u003e0 … 10 V\u003c\/strong\u003e, optionally as 0.5 … 10.5 V or 2 … 10 V. The resolution is \u003cstrong\u003e24 bit\u003c\/strong\u003e, the accuracy is \u003cstrong\u003emax. 0.1 % of the nominal range\u003c\/strong\u003e plus sensor error. A fault signal indicates short circuit and under-range with less than 3.6 mA and sensor break with over 21 mA. The filter is adjustable from 5 to 5000 ms.\u003c\/p\u003e\n\u003cp\u003eThe rectangular form factor measures \u003cstrong\u003e35 × 18 × 4 mm\u003c\/strong\u003e, the round form factor \u003cstrong\u003e31.4 × 28.6 × 4.8 mm\u003c\/strong\u003e with an Ø 8 mm hole; changing the form factor is not a one-to-one replacement as the solder pads are arranged differently. The weight is approx. 3.5 g, the operating range is \u003cstrong\u003e-40 … +85 °C\u003c\/strong\u003e. The board is powered with 9 … 35 VDC on the current output and 12 … 35 VDC on the voltage output; reverse polarity is protected, the short-circuit current is fixed.\u003c\/p\u003e\n\u003cp\u003eThe board is rated \u003cstrong\u003eIP00\u003c\/strong\u003e and must be installed in an enclosure. It is tested according to EN 61000-6-2:2019-11 and EN 61000-6-4:2020-09. A CE mark is not documented in the manufacturer's datasheet; a declaration of conformity must be requested before placing on the market in the EU. For hazardous areas, the \u003cstrong\u003eEOMB\u003c\/strong\u003e version with ATEX and IECEx certification is available. The DEV-KMA configurator with TrComm software is used for configuration and calibration.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eA programmable transducer for Pt100, Pt1000, thermocouple, strain gauge, current, voltage, and potentiometer\u003c\/li\u003e\n\n\u003cli\u003eResolution 24 bit, accuracy max. 0.1 % of the nominal range\u003c\/li\u003e\n\n\u003cli\u003eOutput 4 … 20 mA or 0 … 10 V in several ranges\u003c\/li\u003e\n\n\u003cli\u003eRectangular form factor 35 × 18 × 4 mm, round form factor 31.4 × 28.6 × 4.8 mm\u003c\/li\u003e\n\n\u003cli\u003eOperating range -40 … +85 °C, weight approx. 3.5 g\u003c\/li\u003e\n\n\u003cli\u003eFault signal for sensor break and range violation\u003c\/li\u003e\n\n\u003cli\u003eFilter 5 … 5000 ms adjustable\u003c\/li\u003e\n\n\u003cli\u003eEx-version available as EOMB\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon Shop","offers":[{"title":"Default Title","offer_id":57306231701830,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EOMA_MATU_titelbild_48f0e73a-7129-4c08-9018-d5a1a951cf3d.webp?v=1788951905"},{"product_id":"eomb-universal-messumformer-ex","title":"EOMB universal transmitter, Ex","description":"\u003cp\u003eThe \u003cstrong\u003eEOMB\u003c\/strong\u003e is the explosion-proof version of the universal transducer, type \u003cstrong\u003eMATU-Ex\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eElectrically, it is the same programmable transducer as the \u003cstrong\u003eEOMA\u003c\/strong\u003e, additionally certified as an \u003cstrong\u003eintrinsically safe Ex-component\u003c\/strong\u003e for zones 0, 1 and 2 for gases. The marking is \u003cstrong\u003eII 1 G Ex ia [ia] IIC Ga\u003c\/strong\u003e and \u003cstrong\u003eII 2 G Ex ia [ib] IIC Gb\u003c\/strong\u003e; the certificates are TÜV 21 ATEX 309041 U and IECEx TUN 22.0017 U.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eU\u003c\/strong\u003e in both certificate numbers means component, not device: The installer is responsible for the approval of the finished device. This includes four installation requirements – the board must be installed to at least \u003cstrong\u003eIP20\u003c\/strong\u003e according to DIN EN 60529, encapsulated according to DIN EN 60079-11 in such a way that the permissible barrier layer temperature of the Z-diodes is not exceeded, the supply and output circuit must be safely galvanically isolated from earth potential, and installation and commissioning must be carried out by qualified personnel with knowledge of the types of protection. A temperature class is not specified; it only results from the installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor Ex operation, a narrower operating temperature applies than in the general data:\u003c\/strong\u003e -40 ... +75 °C at the current output and -40 ... +50 °C at the voltage output, compared to a working range of -40 ... +85 °C. Anyone who relies on the approval must design according to these values. The intrinsic safety characteristics: Ui 30 VDC, Ii 110 mA, Pi 1 W at the input; Uo 4.1 V, Io 51 mA or 52 mA, Po 52 mW in the sensor circuit; Uo 12.6 V, Io 48 mA, Po 148 mW at the voltage output.\u003c\/p\u003e\n\u003cp\u003eThe input supports \u003cstrong\u003ePt100 and Pt1000\u003c\/strong\u003e in 4-, 3- or 2-wire circuits, \u003cstrong\u003ethermocouples of types J, K and N\u003c\/strong\u003e, a \u003cstrong\u003estrain gauge full bridge\u003c\/strong\u003e from 350 Ω, current and voltage, as well as a potentiometer from 350 Ω to 100 kΩ. The output is \u003cstrong\u003e4 ... 20 mA\u003c\/strong\u003e or \u003cstrong\u003e0 ... 10 V\u003c\/strong\u003e. The resolution is \u003cstrong\u003e24 bit\u003c\/strong\u003e, the accuracy max. 0.1 % of the nominal range. The rectangular design measures \u003cstrong\u003e35 × 18 × 4 mm\u003c\/strong\u003e, the round one 31.4 × 28.6 × 4.8 mm.\u003c\/p\u003e\n\u003cp\u003eThe intrinsically safe circuit requires an \u003cstrong\u003eisolation barrier\u003c\/strong\u003e in the safe area, which supplies the power and output circuit; it is not included in the scope of delivery. A CE mark is not documented in the manufacturer's data sheet; a declaration of conformity must be requested before placing it on the market in the EU. The DEV-KMA configurator with TrComm software is used for configuration.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eIntrinsically safe Ex-component for zones 0, 1 and 2 for gases\u003c\/li\u003e\n\n\u003cli\u003eATEX TÜV 21 ATEX 309041 U and IECEx TUN 22.0017 U\u003c\/li\u003e\n\n\u003cli\u003eA single transducer for Pt100, Pt1000, thermocouple, strain gauge, current, voltage, potentiometer\u003c\/li\u003e\n\n\u003cli\u003eResolution 24 bit, accuracy max. 0.1 % of nominal range\u003c\/li\u003e\n\n\u003cli\u003eOutput 4 ... 20 mA or 0 ... 10 V\u003c\/li\u003e\n\n\u003cli\u003eOnly 35 × 18 × 4 mm, round design 31.4 × 28.6 × 4.8 mm available\u003c\/li\u003e\n\n\u003cli\u003eEx operating temperature -40 ... +75 °C at current output, -40 ... +50 °C at voltage output\u003c\/li\u003e\n\n\u003cli\u003eVersion without Ex protection available as EOMA\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon Shop","offers":[{"title":"Default Title","offer_id":57306239369542,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EOMB_MATU-Ex_titelbild_eb514156-a269-47f0-abec-74c221d181f1.webp?v=1788951905"},{"product_id":"eomc-io-link-messumformer","title":"EOMC IO-Link transmitter","description":"\u003cp\u003eThe \u003cstrong\u003eEOMC\u003c\/strong\u003e is a single-channel IO-Link transducer as an OEM board, type \u003cstrong\u003eMCUT-E\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt converts the signal from a full strain gauge bridge into a digital measured value – for force and pressure. The measuring range is freely adjustable and \u003cstrong\u003eunitless\u003c\/strong\u003e: the board adopts the unit of the application, whether Newton, kilogram, or bar. Since the value is transmitted via IO-Link, configuration, diagnosis, and device replacement are possible without recalibration.\u003c\/p\u003e\n\u003cp\u003eThe channel accepts \u003cstrong\u003e1 × full strain gauge bridge\u003c\/strong\u003e from 350 Ω, with two parallel full bridges at least 2 × 700 Ω; further bridges are possible, the minimum resistance increases accordingly. The bridge supply provides \u003cstrong\u003e3 V\u003c\/strong\u003e. The measuring range is freely adjustable in the range of \u003cstrong\u003e-3200.0 … +3200.0\u003c\/strong\u003e. The resolution is \u003cstrong\u003e16 bit\u003c\/strong\u003e, the accuracy is \u003cstrong\u003emax. 0.05 % of the measuring range\u003c\/strong\u003e plus sensor error. The filter is 0.5 s, the power-on delay is less than 5 s, and the response time is \u003cstrong\u003e20 ms\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe output has an \u003cstrong\u003eIO-Link interface\u003c\/strong\u003e with a signal level of 0 \/ 24 V according to IO-Link specification. The board is powered with \u003cstrong\u003e24 VDC\u003c\/strong\u003e at less than 30 mA in standard operation, a maximum total current of 130 mA; the switching current in SIO mode is a maximum of 100 mA. Polarity reversal is protected – no function, no destruction.\u003c\/p\u003e\n\u003cp\u003eThe board measures \u003cstrong\u003e40 × 17 × 4.5 mm\u003c\/strong\u003e and weighs approximately 6.5 g, material FR4 and PBT, connection via solder pads 2.7 × 1.5 mm, mounting position arbitrary. The operating range is from \u003cstrong\u003e-20 °C to +80 °C\u003c\/strong\u003e, the storage temperature from -20 °C to +85 °C.\u003c\/p\u003e\n\u003cp\u003eAn \u003cstrong\u003eIO-Link master\u003c\/strong\u003e is required for configuration and operation, as well as the appropriate IODD file from the IODD Finder. The board has \u003cstrong\u003eIP00\u003c\/strong\u003e and must be installed in a housing. It has been tested according to EN 61000-6-2:2005 and EN 61000-6-4:2007 + A1:2011. A CE mark is not documented in the manufacturer's data sheet, a declaration of conformity must be requested before placing it on the market in the EU. This board has \u003cstrong\u003eone\u003c\/strong\u003e channel and no temperature input; the two-channel version with a universal channel is the \u003cstrong\u003eEOME\u003c\/strong\u003e, the round design is the \u003cstrong\u003eEOMD\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRegarding the price:\u003c\/strong\u003e The price applies to the board in its basic configuration. The measuring range is freely adjustable via IO-Link, so factory programming is not required. If you still wish to have the board \u003cstrong\u003efactory programmed to your measuring range\u003c\/strong\u003e, this is possible at an extra charge — \u003ca href=\"\/en\/pages\/contact\"\u003eplease ask us about it\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSingle-channel IO-Link transducer for full strain gauge bridge\u003c\/li\u003e\n\n\u003cli\u003eMeasuring range unitless and freely adjustable, -3200.0 … +3200.0\u003c\/li\u003e\n\n\u003cli\u003eResolution 16 bit, accuracy max. 0.05 % of measuring range\u003c\/li\u003e\n\n\u003cli\u003eResponse time 20 ms, filter 0.5 s\u003c\/li\u003e\n\n\u003cli\u003eOnly 40 × 17 × 4.5 mm, weight approx. 6.5 g\u003c\/li\u003e\n\n\u003cli\u003eBridge supply 3 V, from 350 Ω, multiple bridges possible\u003c\/li\u003e\n\n\u003cli\u003eSupply 24 VDC, standard current less than 30 mA\u003c\/li\u003e\n\n\u003cli\u003eOperating range -20 … +80 °C\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon Shop","offers":[{"title":"Default Title","offer_id":57306257588550,"sku":null,"price":89.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EOMC_MCUT-E_titelbild_13a387df-4d02-40e2-8f04-62fb467c4bc8.webp?v=1788951907"},{"product_id":"eomd-io-link-messumformer-rund","title":"EOMD IO-Link transmitter, round","description":"\u003cp\u003eThe \u003cstrong\u003eEOMD\u003c\/strong\u003e is a single-channel IO-Link transducer as a \u003cstrong\u003eround\u003c\/strong\u003e OEM board, type \u003cstrong\u003eMCUT-R\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eElectrically, it is the \u003cstrong\u003eEOMC\u003c\/strong\u003e, but in a round design: \u003cstrong\u003eØ 31.4 mm with a height of 4.8 mm\u003c\/strong\u003e, with an \u003cstrong\u003eØ 8 mm\u003c\/strong\u003e mounting hole in the center. This shape is intended for sensors with a round housing – a load cell, a pressure transducer, a round housing with cable feed-through in the axis.\u003c\/p\u003e\n\u003cp\u003eIt converts the signal from a strain gauge full bridge into a digital measured value for force and pressure. The measuring range is freely adjustable in the range of \u003cstrong\u003e-3200.0 … +3200.0\u003c\/strong\u003e and is \u003cstrong\u003eunitless\u003c\/strong\u003e, meaning the board adopts the unit of the application. The channel accepts \u003cstrong\u003e1 × strain gauge full bridge\u003c\/strong\u003e from 350 Ω, for two parallel full bridges at least 2 × 700 Ω; the bridge supply provides \u003cstrong\u003e3 V\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe resolution is \u003cstrong\u003e16 bit\u003c\/strong\u003e, the accuracy is \u003cstrong\u003emax. 0.05% of the measuring range\u003c\/strong\u003e plus sensor error. The filter is 0.5 s, the power-on delay is less than 5 s, and the response time is \u003cstrong\u003e20 ms\u003c\/strong\u003e. An \u003cstrong\u003eIO-Link interface\u003c\/strong\u003e with a signal level of 0 \/ 24 V is available at the output. The board is supplied with \u003cstrong\u003e24 VDC\u003c\/strong\u003e at under 30 mA in standard operation, maximum 130 mA total current; reverse polarity is protected.\u003c\/p\u003e\n\u003cp\u003eThe weight is approx. 3.5 g, material FR4 and PBT, connection via solder pads 2.7 × 1.5 mm, mounting position arbitrary. The operating range extends from \u003cstrong\u003e-20 °C to +80 °C\u003c\/strong\u003e, the storage temperature from -20 °C to +85 °C.\u003c\/p\u003e\n\u003cp\u003eAn \u003cstrong\u003eIO-Link master\u003c\/strong\u003e is required for configuration and operation, as well as the appropriate IODD file from the IODD Finder. The board has \u003cstrong\u003eIP00\u003c\/strong\u003e and must be installed in a housing. It has been tested according to EN 61000-6-2:2005 and EN 61000-6-4:2007 + A1:2011. A CE mark is not documented in the manufacturer's datasheet; a declaration of conformity must be requested before placing it on the market in the EU. This board has one channel and no temperature input.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRegarding the price:\u003c\/strong\u003e The price is for the board in its basic configuration. The measuring range is freely adjustable via IO-Link, so factory programming is not required. If you still wish to have the board \u003cstrong\u003epre-programmed to your measuring range at the factory\u003c\/strong\u003e, this is possible for an additional charge — \u003ca href=\"\/en\/pages\/contact\"\u003eplease ask us\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eRound OEM board Ø 31.4 × 4.8 mm with Ø 8 mm hole\u003c\/li\u003e\n\n\u003cli\u003eSingle-channel IO-Link transducer for strain gauge full bridge\u003c\/li\u003e\n\n\u003cli\u003eMeasuring range unitless and freely adjustable, -3200.0 … +3200.0\u003c\/li\u003e\n\n\u003cli\u003eResolution 16 bit, accuracy max. 0.05% of measuring range\u003c\/li\u003e\n\n\u003cli\u003eResponse time 20 ms, filter 0.5 s\u003c\/li\u003e\n\n\u003cli\u003eWeight only approx. 3.5 g\u003c\/li\u003e\n\n\u003cli\u003eSupply 24 VDC, standard current under 30 mA\u003c\/li\u003e\n\n\u003cli\u003eOperating range -20 … +80 °C\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon Shop","offers":[{"title":"Default Title","offer_id":57306258768198,"sku":null,"price":89.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EOMD_MCUT-R_titelbild_9597ba0b-f441-4303-a424-58a6c4a023c2.webp?v=1788951906"},{"product_id":"eome-zweikanaliger-io-link-messumformer","title":"EOME two-channel IO-Link transmitter","description":"\u003cp\u003eThe \u003cstrong\u003eEOME\u003c\/strong\u003e is a two-channel IO-Link transducer as an OEM board, type \u003cstrong\u003eMEUT-E\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChannel 1\u003c\/strong\u003e measures a strain gauge full bridge, \u003cstrong\u003eChannel 2\u003c\/strong\u003e a temperature sensor – and both measured values are transmitted via a common IO-Link interface. This is the case for which this board is built: force or pressure and the corresponding temperature from one device, with one cable and one master port.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe universal channel does not support strain gauge bridges.\u003c\/strong\u003e The datasheet lists them in the sensor list, but states below that strain gauge applications for the universal channel are not yet supported. If you need \u003cem\u003etwo\u003c\/em\u003e force channels, you cannot use this board for that today.\u003c\/p\u003e\n\u003cp\u003eChannel 1 accepts a \u003cstrong\u003estrain gauge full bridge\u003c\/strong\u003e from 350 Ω, with two bridges at least 2 × 700 Ω, with a bridge supply of \u003cstrong\u003e3 V\u003c\/strong\u003e; the unit of measurement is dimensionless. Channel 2 is preset to °C and accepts \u003cstrong\u003ePt100\u003c\/strong\u003e in a 3-wire circuit from -200 to 800 °C at 0.9 mA sensor current or a \u003cstrong\u003ethermocouple\u003c\/strong\u003e of type J (-210 ... 1200 °C), type K (-200 ... 1372 °C) or type N (-200 ... 1300 °C). The measuring range of both channels can be freely set in the range -3200.0 ... +3200.0.\u003c\/p\u003e\n\u003cp\u003eThe resolution is \u003cstrong\u003e16 bit on the strain gauge channel and 24 bit on the universal channel\u003c\/strong\u003e, the accuracy max. \u003cstrong\u003e0.05% of the measuring range\u003c\/strong\u003e plus sensor error. The filters are separate: 0.5 s for strain gauge, 25 s for temperature. The power-on delay is less than 5 s, the response time is 20 ms. The board is supplied with \u003cstrong\u003e24 VDC\u003c\/strong\u003e at less than 30 mA in standard operation, maximum 130 mA total current; reverse polarity is protected.\u003c\/p\u003e\n\u003cp\u003eThe board measures \u003cstrong\u003e40 × 17 × 8.25 mm\u003c\/strong\u003e and weighs about 6.5 g. The height comes from the construction: It consists of \u003cstrong\u003etwo stacked boards\u003c\/strong\u003e. The single-channel version with the same outline is only 4.5 mm high. Material FR4 and PBT, connection via solder pads 2.7 × 1.5 mm, installation position arbitrary, operating range \u003cstrong\u003e-20 °C to +80 °C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eAn \u003cstrong\u003eIO-Link master\u003c\/strong\u003e is required for configuration and operation, as well as the appropriate IODD file from the IODD Finder. The board has \u003cstrong\u003eIP00\u003c\/strong\u003e and must be installed in a housing. It has been tested according to EN 61000-6-2:2005 and EN 61000-6-4:2007 + A1:2011. A CE mark is not documented in the manufacturer's datasheet; a declaration of conformity must be requested before placing it on the market in the EU. A version with integrated safety function PL c \/ SIL 1 is the \u003cstrong\u003eEOMF\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRegarding the price:\u003c\/strong\u003e The price is for the board in its basic version. The measuring ranges of both channels are freely adjustable via IO-Link, so factory programming is not required. However, if you wish to have the board \u003cstrong\u003eprogrammed to your measuring ranges at the factory\u003c\/strong\u003e, this is possible at an additional cost — \u003ca href=\"\/en\/pages\/contact\"\u003eplease ask us about it\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eTwo channels on one board: strain gauge full bridge and temperature sensor\u003c\/li\u003e\n\n\u003cli\u003eChannel 2 for Pt100 (3-wire) or thermocouple type J, K and N\u003c\/li\u003e\n\n\u003cli\u003eResolution 16 bit on the strain gauge channel, 24 bit on the universal channel\u003c\/li\u003e\n\n\u003cli\u003eAccuracy max. 0.05% of the measuring range\u003c\/li\u003e\n\n\u003cli\u003eSeparate filters: 0.5 s for strain gauge, 25 s for temperature\u003c\/li\u003e\n\n\u003cli\u003eBoth measured values via one IO-Link interface\u003c\/li\u003e\n\n\u003cli\u003e40 × 17 × 8.25 mm, two stacked boards, approx. 6.5 g\u003c\/li\u003e\n\n\u003cli\u003eOperating range -20 ... +80 °C\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon Shop","offers":[{"title":"Default Title","offer_id":57306259030342,"sku":null,"price":134.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EOME_MEUT-E_titelbild_961c1f67-c557-4ccc-a316-d76c0bc0d343.webp?v=1788951931"},{"product_id":"eomf-zweikanaliger-messumformer-pl-c","title":"EOMF two-channel transmitter, PL c","description":"\u003cp\u003eThe \u003cstrong\u003eEOMF\u003c\/strong\u003e is a two-channel measuring transducer with a built-in overload circuit of level \u003cstrong\u003ePL c \/ SIL 1\u003c\/strong\u003e, type \u003cstrong\u003eMEUTS-SIL\u003c\/strong\u003e, certified by TÜV Nord under number 44 799 14098202.\u003c\/p\u003e\n\u003cp\u003eIts special feature is the safety circuit: it has its \u003cstrong\u003eown amplifier\u003c\/strong\u003e and runs \u003cstrong\u003eparallel\u003c\/strong\u003e to the measurement chain of the IO-Link transducer – meaning the safety function is not dependent on the measurement chain. A solid-state relay opens if the switching point is exceeded, if the measuring amplifier's supply voltage is too low or missing, if there is a cable break on one or both signal lines, and if the safety circuit's own supply is too low or missing. \u003cstrong\u003eThe safe state is the open relay.\u003c\/strong\u003e The input is high-impedance biased to detect a cable break; two comparators – one for the measuring signal against the switching point, one for the bridge supply – are AND-linked.\u003c\/p\u003e\n\u003cp\u003eTwo \u003cstrong\u003elimit values\u003c\/strong\u003e can be set via IO-Link: the turn-on point from -7 to +7 mV, the turn-off point from -5 to +21 mV, with a switching accuracy of ± 50 µV and a \u003cstrong\u003ereaction time of a maximum of 10 ms\u003c\/strong\u003e. The switching load is a maximum of 30 VAC\/VDC at 500 mA. It is based on EN ISO 13849-1:2015 and EN 61508:2010.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChannel 1\u003c\/strong\u003e measures a full strain gauge bridge, dimensionless, from 350 Ω (two bridges from 2 × 700 Ω) with a bridge supply of 3 V. \u003cstrong\u003eChannel 2\u003c\/strong\u003e is universal, pre-set to °C, for \u003cstrong\u003ePt100\u003c\/strong\u003e in 3-wire circuit from -200 to 800 °C at 0.9 mA or a \u003cstrong\u003ethermocouple\u003c\/strong\u003e of type J (-210 … 1200 °C), type K (-200 … 1372 °C) or type N (-200 … 1300 °C). The range of both channels is freely adjustable in the range -3200.0 … +3200.0.\u003c\/p\u003e\n\u003cp\u003eThe output provides \u003cstrong\u003eIO-Link\u003c\/strong\u003e with level 0 \/ 24 V \u003cstrong\u003eand\u003c\/strong\u003e a current output \u003cstrong\u003e4 … 20 mA\u003c\/strong\u003e, which runs via input 1. The resolution is 16 bit on the strain gauge channel and 24 bit on the universal channel, with an accuracy of max. 0.05 % of the measuring range plus sensor error. Filter: 0.5 s for strain gauge, 25 s for temperature. Supply \u003cstrong\u003e24 VDC\u003c\/strong\u003e at under 30 mA in standard operation, maximum 130 mA total current.\u003c\/p\u003e\n\u003cp\u003eThe board measures \u003cstrong\u003e21 × 76.95 × 4.2 mm\u003c\/strong\u003e and weighs approximately 7.6 g, material FR4 and PBT, connection via solder pads 2.7 × 1.5 mm, mounting position optional, operating range \u003cstrong\u003e-20 °C to +80 °C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThree mounting requirements and the enabling of the limit values must be read before the housing is closed.\u003c\/strong\u003e The board must be installed in the sensor housing to at least \u003cstrong\u003eIP54\u003c\/strong\u003e and protected against vibrations; the safety circuit must be regularly checked for function, the manufacturer recommends \u003cstrong\u003etwo years\u003c\/strong\u003e, and the limit values must be checked before commissioning. To set the limit values via IO-Link, a \u003cstrong\u003ephototransistor\u003c\/strong\u003e (SFH 309 or similar) must be connected and illuminated; thereafter, the settings must be read back and the phototransistor darkened – in normal operation, it must be covered in such a way that unintentional illumination is excluded.\u003c\/p\u003e\n\u003cp\u003eAn \u003cstrong\u003eIO-Link master\u003c\/strong\u003e is required for configuration and operation, as well as the IODD file from the IODD finder. The board has been tested according to EN 61000-6-2:2005 and EN 61000-6-4:2007. A CE mark is not documented in the manufacturer's data sheet; a declaration of conformity must be requested before placing on the market in the EU. The version without safety function is the \u003cstrong\u003eEOME\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRegarding price:\u003c\/strong\u003e The price applies to the basic version of the board. Measuring ranges and limit values are adjustable via IO-Link, so factory programming is not required. If you would like the board \u003cstrong\u003efactory-programmed to your measuring ranges and switching points\u003c\/strong\u003e, this is possible at an additional cost — \u003ca href=\"\/en\/pages\/contact\"\u003eplease ask us\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eOverload circuit PL c \/ SIL 1, TÜV Nord 44 799 14098202\u003c\/li\u003e\n\n\u003cli\u003eSafety circuit with its own amplifier, parallel to the measuring chain\u003c\/li\u003e\n\n\u003cli\u003eRelay also opens in case of cable break and undervoltage – safe state is open\u003c\/li\u003e\n\n\u003cli\u003eTwo limit values adjustable via IO-Link, reaction time max. 10 ms\u003c\/li\u003e\n\n\u003cli\u003eOutputs IO-Link and 4 … 20 mA\u003c\/li\u003e\n\n\u003cli\u003eChannel 1 full strain gauge bridge, Channel 2 Pt100 or thermocouple\u003c\/li\u003e\n\n\u003cli\u003eResolution 16 bit strain gauge, 24 bit universal, accuracy max. 0.05 %\u003c\/li\u003e\n\n\u003cli\u003e21 × 76.95 × 4.2 mm, approx. 7.6 g, operating range -20 … +80 °C\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon Shop","offers":[{"title":"Default Title","offer_id":57306259620166,"sku":null,"price":369.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EOMF_MEUTS-SIL_titelbild_b1ff3cac-f6c1-4f9f-be9f-e3eea90af3e2.webp?v=1788951931"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/collections\/ETLG_TLB__product_freigestellt.png?v=1788195706","url":"https:\/\/octogon.org\/en\/collections\/measurement-electronics.oembed","provider":"octogon GmbH","version":"1.0","type":"link"}